Latest tor steel Tenders | Government tor steel Tenders

State Government

CTN :45719782

04 Jul, 2026 NA

Rampur Hat - West Bengal

Tender For supply of materials for mgnrega works - supply of materials, earth, coal (steam), carriage of tar bitumen, bitumen vg-30, bitumen emulsion, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone screening type a (13.2 mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), 1st class bricks, coarse sand, stone boulder ( 225mm-150mm ), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, rcc pipe 900 mm dia np - 3 spigot, carriage of r.c.c. pipes 900 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, stone aggregate(single size):63 mm nominal size, river bed material, geotextile 120 gram per sqm membrane, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm

State Government

CTN :45720727

15 Jul, 2026 6.31 Lacs

Satna - Madhya Pradesh

Tender For bunai udhog material - paper tape , welding rod , khila no. 14, no. 17, no. 20 , yellow soil, chalk soil , plastic cane (for weaving chairs) , chandras , thinner n. c , sandpaper (4 inches) , turpentine oil , paint (all colors) , water paint (all colors) , oil paint (all colors) , brush , brush , saw , triangular sand , ply 12 mm. , ply 18 mm. , ply 8 mm. , ply 6 mm , sanamaika (1mm) , sunmaika (0.8 mm) , iron angle iron bar , iron cutter blade , iron cutter blade , all sizes including nutbolt washer , foam 3"inch, 32 dec , foam 2"inch, 32 pcs , foam 1"inch, 32 dec , sofa cloth/raggin , gridder stone , putty , budcutter round blade , yes. i wire , broomstick , solution (sr 505) , welding glasses (black/white) , inch tape , drill brick , wood discount , wood teak , wood acacia , sheesham wood , firewood , siller , woodtouch , wood paper , electric washing machine , singja , breech vise , hand drill machine , compressor gun , compressor pipe , planer machine molding die , sewing machine oil , short button nylon , hand needle , sewing machine needles (10 pieces per packet) , sewing machine footrest swing , tailor chalk , thread ballast , aprila machine bunch , sewing needle plate , kaichi (08 no., 10 no.) , sharpening stone , sewing machine , interlock machine , embroidery threads , kadhai ka frame , macrame cards (cotton, polyester, nylon, jute) , poly master , foot rope , stapler pin , white paper gsm 80 , ledger paper (green) gsm 80 , white paper gsm 68 , white paper gsm 68 , ruled paper gsm 68 (1000 pieces) , ruled paper gsm 68 , white paper gsm 57 , brown paper gsm 80 , cardseat gsm 165 , dapti section 32 no , rin, surf excel laundry soap , coating , favicol , winding thread , weeding cloth , fountain water , brown tape , screen printing ink , decoter , german sponge , reducer , widening paper , synthesizer , yellow envelope paper , stapler gun , widening paper , coloured paper gsm 70 , picking wall faywar , pickers , rate chit ketch (leaf set) , pressing cane lever -lr-101 , wooden steel 29 number , wheel gear 14 t-62 no. , wevel gear , warm wheel steedy , rechit gotan liver , buffer soldering bracket , buffer bands (leather) , stick cape , baring , ratchet wheel , visit weaver , warm , parachute rope , fine belt , picking stick , tariff wheel , handloom pickers , colorfast , powerloom steel comb , yarn in 2/40s cone (coloured/white) , yarn 6s in coloured cones , colored wool , yarn 2/60s in cone (coloured/white) , jute cloth , yarn in 65 cones , hand loom combs (12 nos.) , warping machine brake - belt leather , dari panja (wood) , emery strip , spend frame hookah set , pick weaving rods, weaving rods (handloom) cast iron welding rods , temple rod/cover , swelling filler

Central Government And Public Sector

CTN :45739258

20 Jul, 2026 NA

Damanjodi - Odisha

Tender For supply of 1 .10101280340 eight pulley line stand 8 pulley line stand as per sheet no.1 and 2 of drawing no.nalco by mines by mech by c and c by 152 , 2 . 10101282650 short side plate to support cross tube. as per is 26291966 drgno nalco by mines by c and c by mech by 025 , 3 . 10101280961 line stand tie plate to strengthen line stand unit. as per is 26291966 drg nonalco by mech by c and c by mines by 144 , 4 . 10101336300 line stand l-plate to hold purlin. line stand l-plate hot dip galvanized as per is 26291966 drg nonalco by mech by c and c by mines by 144 , 5 . 10101404550 1 mm thick shim plate for cb line stand as per item no.2 of drawing no. nalco by mines by mech by c and c by 183. thematerial of the item should be stainless steel. , 6 . 10101404560 2 mm thick shim plate for cb line stand as per item no.2 of drawing no. nalco by mines by mech by c and c by 183. , 7 . 10101404570 3 mm thick shim plate for cb line stand as per item no.2 of drawing no. nalco by mines by mech by c and c by 183.

CTN :45435925

01 Jul, 2026 NA

Calcutta - West Bengal

Tender For bid to ras supply of lv6-mt6 2525-2030-5801 rubber hose radiator to top cover water , lv6-mt14 2640-000048 valve core tr ci long short , lv6-mt2 5120-99-803-0263 lever tyre car or truck , lv6-mt1 ia-010075 bins steel portable , lv6-mt12 2786-0911-9904 filter fuel

CTN :45367742

02 Jul, 2026 NA

Jamnagar - Gujarat

Tender For bid to ras bid to ras bid to ras supply of fancy tap with l bend , cp waste coupling for steel kitchen sink 100x32mm , ewc china glazed p trap , gi elbow 15mm , gi elbow 20mm , gi nipple 15x100 mm long , gi nipple 20x100 mm long , gi nipple 20x150 mm long , gi nipple 20x75 mm long , gi plug 15mm , gi plug 20mm , gi claimps 20mm dia tubing , gi elbow reducing 20x15mm , gi elbow reducing 25x20mm , gi socket 15 mm , cp grating 150 mm dia , pvc flushing cistern l l 10 ltr cap , gi socket reducing 25x 15 mm , gi socket 20 mm , gi tubing 15 mm medium grade , gi tee equal 15 mm , gi tees equal 20 mm , gi wiremesh roll 15mtr roll of 30 kgs , gi tubing 20 mm medium grade , glass sheet 3 mm thick ordinary quality in sqaure n ecx 0 point 50 sqm each pane , glass sheet plane 4 ft x 4 ft x 5 mm thick , glass shelf 600 x 120mm x 6mm thick with chromium guard , hacksaw blade both side teak heavy duty , helical door spring 250mm , glass sheet pin headed 4 ft x 4 ft x 5 mm thick , hydrolic door closer left , hydrolic door closer right , looking mirror 18 inch x 24 inch with pvc frame , looking mirror 5 feet height for office , nails 1inch , nails 1 point 5 inches , nails 4 inches , oil putty , paint blue , paint synthetic enamal in white colour , pillar tap for whb swan neck , plywood bwr grade of size 8 ft x4 ft x6mm , putty glazing , pvc ball cock float valve 15mm complete , pvc ball cock float valve 20mm complete , steel ms hinges butt 75 mm , looking mirror 600x450 pvc frame , pvc pillar tap 15mm fancy , pvc ball cock float valve 25mm complete , pvc bib cock 15 mm , pvc bib cock long body 15 mm , pvc bib cock short body 15 mm , pvc connection 15x450mm long complete with nut bolt and washer , pvc grating round or square 100 x 150mm , pvc grating 100mm , pvc grating 140 mm , pvc grating 75mm , pvc connection 15x600mm long complete with nut bolt and washer , pvc shower rose 15 x 100mm , pvc urinal waste pipe with coupler screw type , pvc waste pipe corrugated 32 x 900 mm long , pvc stop cock 15mm , pvc stop cock 15mm external thread , pvc towel rail 24 inches 600mm , pvc waste pipe 32 mm flexible type heavy grade 600 mm length , pvc waste pipe flexible 40mm x 600 mm , rat rail brass rod pattern spring 300 mm including roller and roller plate , stainless steel kitchen sink 675 x 535mm , water storage tank 500 ltr , stainless steel kitchen sink with drainboard overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete , stainless steel plate rack size 1220x x915x610mm , stainless steel plate rack size 900x750x250mm , steel ms hinges butt 100 mm , cp brass soap dish , taflon tape , turpentine oil , water storage tank 1000 ltr , bib tap for sink swan neck , wash basin 550 x 400 mm , seat cover for wc with rubber base , corner glass shelf 9 inch x 12 inch size , aluminium door stopper 100mm double rubber type , double layer cyl verticle tank 1000 ltr white colour , double layer cyl verticle tank 700 ltr white colour , hydraulic door closer , mortise door lock , pvc grating with waste hole basin mixer 150mm , pvc lid for tank 1000 ltrs with hinges and screw , pvc pipe 15 mm 10 mtr long , pvc pipe 20 mm 10 mtr long , pvc pipe 25 mm 10 mtr long , ss sink coupling no 3 , ss sink coupling no 4 , tank cover for tank 500 or 1000 ltrs , gi nipple 20 mm tank checknut , gi tank nipple 25 mm checknut , gi tank nipple 15 mm checknut , ms tower bolt 150 mm , white cement i kg bag , aluminium curtain rod 25 mm 12 feet long , cp bib cock 2 way 15 mm , ball valve high pressure ptmt pvc withapoxy coated aluminium rod 32 mm , bib cock brass 15 mm , cp waste coupling 32 mm brass cp , ball valve high pressure ptmt pvc withapoxy coated //bid details 2 / 116 aluminium rod 20 mm , ball valve high pressure ptmt pvc withapoxy coated aluminium rod 15 mm , white cement 5 kg bag , pvc elbow 15 mm , pvc elbow 20 mm , pvc elbow 25 mm , leather tool bag , nails wire of various size , fevicol 5 kg pack size , tumbler holder glass

CTN :45720695

20 Jul, 2026 NA

Tikamgarh - Madhya Pradesh

Tender For supply of implant and implant consumable during the year 2026-27 - tens nail ss set, tibia nail ss set, femur nail ss set, proximal tibia plate ss set, distal femur plate ss set, ss wire, k- wire ss, external fixature ss, pfn ss, a.o. clamp, c.c. screw 4.0mm (15mm - 85mm), c.c. screw 6.5mm 16mm threaded (25mm - 110mm) (titanium), c.c. screw 6.5mm 32mm threaded (25mm - 110mm) (titanium), c.c. screw 6.5mm full threaded (25mm - 110mm) (titanium), cable synthesis, calcancal plate (steel), calcaneal plate (titanium), cancellous locking fully threaded screw 6.5mm, cancellous locking partially threaded screw 6.5mm, cancellous screw 6.5mm full threaded (steel), centre slotted bolt, clavicle nail, d.h.s. plate long barrel (all size), d.h.s. plate short barrel (all angle & size), dcp locking plate narrow, dcp small locking plate (all size), denham pin (all size), dhs screw 60 to 110 mm, distal femoral nail (sizes : width 9-12mm & length 5-35cm), distal radius locking plate ellies type, distal tibia locking plate (5 to 8 hole) anatomic contoured, distal tibia locking plate screw (2.7mm), distal tibia nail sizes (width 8 mm to 10mm) length : 28-38cm., elastic nail / stainless steel nail (size 3 to 4mm) / 10.5, ellis buttress plate (3 to 8 hole) for radium (all size), ender nail (size : width 3, 3.5 & 4mm), female post (1 hole, 3 hole, 5 hole), femur interlocking nail sizes (width : 8mm to 12mm length : 36 cm to 44cm), flexible drill bit (all size), guarded drill bit, half pins, half rings (s.s.) (all size), herbert screw 4mm thickness (titanium), hexagonal socket, hollow connecting rod (8"-20") 10mm, hook plate for olecranon, humerus interlock bolt 3.4 bolt, humerus interlocking nail (all size), 1/3 tubular plate (4 to 8 hole), ilizarov and other external fixator implant, illiosacral screw (all size), inter lock bolt 4.9 mm (length 18 mm to 60mm), interlocking bolt 3.9mm (length 18 to 52mm), italian arch (s.s.), jess fixator / distractor set, k wire bayonet tip, k-nail for femur (sizes : width 7-9mm, length 26-38cm), k-wire (1.8/2.0/2.5mm width) (6" to 9"), k-wire trochar tip, locking cortical screw 3.0mm, locking cortical screw 4.0mm, locking cortical screw 5.0mm, male post (1 hole, 3 hole, 5 hole), malleolar screw 4.5mm (15mm to 95mm), mini plates (non locking) for metacarpal fixation 2-8 hole mini plates, thickness 2.5mm, 6mm to 16mm length, multiplanar clamp, narrow dcp for tibia and hemerus (4.5mm), nuts, olive wires, ordinary bolt, pelvis - contoured plate, spring plate, symphysis plate, proximal (upperend) tibia hokey plate (left and right) 6 to 12 hole, proximal bolt p.f.n. 6.5 mm (60-100mm), proximal bolt p.f.n. 7.5mm (70-110mm), proximal femoral locking compression plaet, proximal femoral nail - long (sizes : width 9-12mm & length 36-42cm), proximal femoral nail - short (sizes : width 9-12mm & length 25mm), proximal humerus locking plate (4-6 hole) philos type, proximal tibia i buttress plate (4-10 hole), proximal tibia locking plate (rt. and lt.) (5 to 12 hole), proximal tibia nail sizes (width 8mm to 10mm) length : 28-38 cm., proximal tibia t buttress plate (4-10 hole), rail road external fix. (8", 10", 12", 16") / lrs, rancho cube (1 hole, 2 hole, 3 hole), reconstruction plate 3.5mm (all size), reconstruction plate 4.5mm (all size), rod to rod clamp, sacroillac screw (all size), schanz pin (2.5,3,3.5,4,4.5mm), schanz pin fixation bolt, screw for mini plates thickness 2.5mm, 6mm to 16mm length, side slotted bolt, simple cancellous screw 4.0mm (15mm-85mm), simple cancellous screw 6.5mm 16mm threads (steel), simple cancellous screw 6.5mm 32mm threads (steel), simple cortical screw 3.5mm, simple cortical screw 4.5mm, small dcp (3.5mm), scanz, square radius nail (width 2,2.5,3 & 3.5mm), square ulna nail (width 2,2.5, 3 & 3.5mm), ss wire (16 to 24 g), steinmann pin (all size), straight plate (2 hole, 3 hole, 4 hole), straight plate with threaded rod - 6 hole, t and l locking buttress (4 to 8 hole), taper

CTN :45738156

15 Jul, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of steel locker , slippers , matting , coat for students , sweater for students , school shoes , shoe brush , school bags , under garments upper , under garments lower , socks , sanitary pads , thermal set for students , hijab , scarf , night suit , towel large , shoe polish big , tooth brush , tooth paste , lotion , glycerin , odonil bathroom freshner , steel brush for utensils , soap , shampoo , hair oil , hair comb , harpic , tile clearner , room freshner , handwash , detergent cake , detergent powder 1 kg pack , computer table , cooking gas cylinder refill , note book short , note book long , rough copy , scrap book , geometry box , ball pen , paper rim , drawing sheet different colors , pencil eraser sharpener , file cover ordinary , stapler pin , tag long , paper t pins , glue stick , fevicol glue , color box crayon , sketch color box , diary small , ink pad , duster , file cover superior , v7 pen , marker black red blue , white board , cash book , stastical register , attendence register , demarkation register , consumption register , arrival register , stock register , ink for markers , ear rings , flower set jewellery , broach , payal , bangles , uniform sets suits , organza dupatta , tri colour flag hand , sash tri colour , rice kashmiri wanda superior , edible oil 15 kgs pack mustard , edible oil 15 kgs pack refined , mirchi chilli powder , haldi termaric powder , sauf powder , sauf saboot , cloves loung , black pepper sabood , namkeen tea , biscuits , sugar , suji , milk amul verka , salt , butter 500 gm pack , soya bean , green cardomon , black cardomon , cinnamon , channa dal , moong dal , kabooli channa , rajma dal , urad dal , arhar dal , onion , potato , eggs , kashmiri saag , spinach palak , tomoto , beans , carrot , cauliflower , cabbiage , ginger , cucumber , turnip , garlic , brinjal , kashmiri kuddu , green peas , reddish , broccolli , lotus stem nadru , banana , mango , apple , orange , mango juice 1 ltr pack , lemon , grapes , water melon , mutton sheep without ujdi , chicken boiler , curd , bread chwoor , bread girda , bread , cheese , butter 10 gm pack , corn flakes , channa black , lipton tea , ghee , masur dal , kishmish , badam , cocunut dry , pista , kaju , dates //bid details 2 / 93

CTN :45717002

13 Jul, 2026 1.92 Lacs

Bulandshahr - Uttar Pradesh

Tender For tender for supply of pipe and pipe fittings - m s flange 8 inch as per table d 12mm thickness , m s flange 4 inch as per table d thickness 10mm , m s flange 6 inch as per table d 10mm thickness , m s short bend 6 inch , m s short bend 8 inch , g i socket 1 inch , g i socket 1 1/2 inch , g i socket 1/2 inch , g i socket 3/4 inch , m s socket 1 inch , m s socket 1/2 inch , m s socket 3/4 inch , m s uninon socket 3/4 inch , wire rope clamp 3/4 inch , m s long bend 1 inch , m s long bend 1 1/2 inch , m s long bend 3 inch , m s long bend 4 inch , m s long bend 6 inch , m s long bend 8 inch , g i clamp for hose pipe 1 inch , g i clamp 1 1/4 inch , m s long bend seamless sedule 40 size 1 1/2 inch , carbon steel seamless steam pipe as per astm a 106 grade b in schedule 80 size 114.3 mm od 4 inch nb ibr approved with mtc , carbon steel seamless schedule 40 pipe line size 6 inch x 7 11 mm thick

Central Government And Public Sector

CTN :45333186

14 Jul, 2026 59.95 Lacs

Lucknow - Uttar Pradesh

Tender For corrigendum : supply of main fire pump , diesel driven pump , jockey pump , terrace pump , control panel , starter , m s pipe , internal hydrant valve , external yard hydrant valve , butterfly valve , sfc of butterfly valve , orifice plate , pitc non return valve , stainless steel y strainer , pitc of stainless steel y strainer , hose pipe , first aid hose reel , short branch pipe , fire brigade connection , foot valve , air vessel , pressure switch , pressure gauge , control valve , hose cabinet , cutting holes , supply of cable , laying of cable , end termination , fire cable , cable tray , earthing , gi strip , gi strip , earth wire , gi pipe

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

Tor Steel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government And Public Sector

Central Government And Public Sector

State Government