Latest towing hook Tenders | Government towing hook Tenders

corporations/Associations/Others

CTN :40134964

10 May, 2025 NA

Gopeshwer - Uttarakhand

Tender For supply of street light pole,stay set,stay wire,bunch cable,led street light,stay clamp,dead end clamp,suspension clamp,nut and bolt,labour and installation charges

Central Government/Public Sector

CTN :40123180

15 May, 2025 NA

Katni - Madhya Pradesh

Tender For supply of large feeder suspension clamp 20 mm ri-1580 1581, 1582 with complete fitting and fasteners spec: ti/spc/ohe/fittings/0130-10/13-rev-1 or latest, drw: eti ohe p 1580 sh 1 or latest , str: co re-str-16 rev-1 or latest suspension clamp for ohe, material type aluminum alloy steel core with hot deep g alvanized, strength 25000 lb, u-bolt 1/2 inch dimensions 3.5 inch x 8.22 inch weight approx 0.60 kg material i s confirming to is: 1461-2009 or latest. (warranty period : upto 30 months from the date of supply) [ warran ty period: 30 months after the date of delivery ]

State Government

CTN :40134375

01 May, 2025 NA

Dharamshala - Himachal Pradesh

Tender For supply of pg clamp suitable for various sizes of conductors, suspension clamps and stay n support clamp as per annexure-i, is required in operation circle working under chief engineer (op.) kz zone, dharamshala

CTN :40102204

28 Apr, 2025 17.00 Lacs

Barabanki - Uttar Pradesh

Tender For : supply of decentralized material under edc barabanki. ----holding clamp for 11 mtr. stpstay clamp for stp 11 mtr.suspension clamptop-t-off clamp for 11 mtr. stptop-t-off clamp for 8.5 mtr. pcc polei hook clampclamp for distribution boxx-arm holding clamp for pcc poledead end clampdropper channel clampearth wire clampgaurding angle clamp for pccgaurding angle clamp for stplt clamp for pcc pole

State Government

CTN :40095274

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing electro-mechanical accessories and others at pump house- i and ii for bahadurpur w/s scheme at murarai -i block under bolpur mechanical division phe dte. - supply and delivery at site of the following submersible pumping machinery and electrical accessories as per approved vendor list of phed, submersible pumping machinery directly coupled with water proof suitable size motor having following specification :- pump:duty condition -25.74 m3/hr, head- 57 mtr, shaft-stainless steel, impeller- s.s / gm, outlet size: 65mm / 80mm., motor:submersible type 3 ph , 50hz, 415 volt 10% 2900 rpm motor must be suitable for operation with star delta starter.(test certificate along with characteristic curve should be submitted at the time of delivery)., 1.1kv grade 4 sq.mm x 3 core water proof flat submersible cable for above pump-motor set., 1.1kv grade 10 sq.mm 3 core xlpe insulated aluminium armoured cable conforming to is 7098 (part-i) 1988, with upto date amendments., supply and delivery of the following valves, pipes and gauges etc at site, 3mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg, 1.5 mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg., 80mm dia. ci top & bottom adopter., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 80mm dia. cidf non-raising sluice valves, pn 1.0 rating (conforming to is:14846) for delivery pipe line and wash out line.(moc & tc needed for valve)., 80mm dia. cidf single door swing non return valve, pn 1.0 rating (conforming to is:5312).(moc & tc needed for valve)., cidf 90 bend- 1no., ci flanged tee- 1no., blank flange-1no., ci/ ms flanged short piece 0.50 mtr.-1no, ci/ ms flanged pipe 1mtr.- 1 no. etc (as per is specification and certification registered) for construction of delivery pipe line and wash out line, heavy type 250mm dia./suitable split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design., anti snapping safety device for pump set by supplying suitable size of ms angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials, 150mm dial pressure gauge [range 0-7kg/cm ] with glycerine filling inside the dial including brass cock and fitting complete [this cost includes 15mm. dia g.i. pipes and specials]., making brick pillar 0.25 x 0.25 x 0.75 mtr/suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete., making cc foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 mtr below the gl including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of eic (size: 3 x 1 x 5)., suitable kiosk box for cable connection of submersible pump motor set with degree of protection ip 65 including suitable legs and 6 nos. al. bus bar for 32 amps and all necessary earthing arrangement and insulator as per direction of eic., laying of one no. cable 10 sqmm 3 core ( departmental supply) in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of thecable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed., carrying and fixing three phase submersible pump 7.5 hp mug starter as per direction of eic ., installation of submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms specials etc.

Central Government/Public Sector

CTN :39320562

28 Apr, 2025 54.52 Lacs

Gaya - Bihar

Tender For corrigendum : supply of tower hardware parts - danger plate , number plate , phase plate set of three , circuit plate set of two , anti climbing device , bird guard set of three , twin bundle spacer , twin rigid spacer for jumper , mid span comp joint , flexible copper bod , earth wire vibration damper , tension clamp for dead end plus jumper cone , twin tension string fitting without clamp , clamp for tension fitting for htls conductor , single i suspension string , clamp for single i suspension fitting for htls conductor

State Government

CTN :39923817

30 Apr, 2025 38.83 Crore

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of accessories for lt abc of various sizes (item wise evaluation will be done as per the schedule of quantity in part-i (page-4) - anchor clamp/ dead end clamp, anchor bracket and flexible metalic rope) for 70 sq.mm lt ab cables (insulated messenger 50 sqmm), anchor clamp/ dead end clamp, anchor bracket and flexible metalic rope) for 50 sq.mm lt ab cables (insulated messenger 35 sqmm), anchor clamp/ dead end clamp, anchor bracket and flexible metalic rope) for 35 sq.mm lt ab cables (insulated messenger 25 sqmm), (suspension clamp, suspension bracket and movable connecting link) for 70 sqmm lt ab cable (insulated messenger 50 sqmm) , (suspension clamp, suspension bracket and movable connecting link) for 50 sqmm lt ab cable (insulated messenger 35 sqmm) , (suspension clamp, suspension bracket and movable connecting link) for 35 sqmm lt ab cable (insulated messenger 25 sqmm), pre- insulated midspan joints for 16 sq.mm , pre- insulated midspan joints for 35 sq.mm , pre- insulated midspan joints for 50 sq.mm , pre- insulated midspan joints for 70 sq.mm , insulation piercing connector (ipc) - main 16 sq.mm to 95 sq.mm; tap: 16 sq.mm to 95 sq.mm, insulation piercing connector (ipc) - main 16 sq.mm to 95 sq.mm; tap: 4 sq.mm to 35 sq.mm , insulation piercing connector (ipc) - main 16 sq.mm to 95 sq.mm; tap: 1.5 sq.mm to 16 sq.mm , satellite connector - main: 16 sq.mm to 95 sq.mm; tap:2.5 sq.mm to 35 sq.mm (4 way), cable end cap for abc 70 sq.mm, cable end cap for abc 16 sq.mm, cable end cap for abc 35 sq.mm, cable end cap for abc 50 sq.mm, pre insulated bi-metallic lug for 16 sq.mm, pre insulated bi-metallic lug for 50 sq.mm, pre insulated bi-metallic lug for 70 sq.mm, post mounting lt distribution box for service connection with clamping devices

State Government

CTN :40071835

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing and installation of electro-mechanical accessories at cwr site and allieds works at ekpara pwss, block-rampurhat-i under bolpur mechanical division - supply and delivery of openwell submersible pumping machinery set suitable for wet pit installation complete with stainer along with all accessories with following specification: pump : discharge (q) : (1800-1280) m3/hr. & head (h) : (19-38) mtrs.method of starting : sd, shaft-stainless steel-ss-304, impeller- crome steel/ci/s.s / bronze, suc & del size- 90/80 mm dia, type of position-horizontal. mechanical sealmotor : 12.5hp (suitable for open well)operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2800 rpm, method of starting : s/dmake : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor. ( n.b : manufacturers test certificate along with charecteristics curve, moc and gurantee certyificate have to be submitted at the time of delivery.), supply & delivery at site of 35 mm x 3.5 core size aluminum armored, xlpe insulated 1.1 k.v. grade cable, conforming to is 7098(i) as per direction of eic.(make:- gloster / polycab / mescab / or any approved vendor list of phed.) ( n.b : manufacturers test certificate have to be submitted at the time of delivery.), supply & delivery of 100a kit-kat rewireable (porcelain fuse carrier & base) (make:- havells / l&t / or any approved vendor list of phed.), supply & delivery of 100 amps re-wireable porcelain fuse unit type tpn main switch with steel sheet enclosure (conforms: is/iec600947-1&3). (make: havells /approved vendor list of phed.), supply & delivery of re-wireable type tpn changeover switch 100 amps 415v, 50hz, 4 pole offload with steel sheet enclosure (conforms: is/iec60947-1&3). (make: havells /approved vendor list of phed.), 100 amps, 4way, wall mounted copper busbar chamber with steel sheet enclosure (conforms:is/iec:60947-3). (make: havells /approved vendor list of phed.), supply and delivery of the following pipes, valves, pipes and gauges etc at site-- (make: approved vendor list of phed.), 100mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 150mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 100mm dia m.s. blank flange 15mm thick perforated as per is1538., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 100mm dia. cast iron double flanged manually operated rising spindle type sluice valve generally conforming to is: 14846, having body, door, dome / bonnet, gland in graded cast iron to is 210 gr. fg 260, four faces of ss aisi 304 and spindle nut of gunmetal to is 318 gr. ltb 2, outside screw rising stainless steel aisi 304 spindle, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges faced and drilled to is:1538 table 4 & 6. valves tested by closed end method only. (moc & tc needed for valve)., 100mm dia. cast iron double flanged single door swing non-return valve generally conforming to is:5312 part i, having body, door, cover in graded cast iron to is 210 gr. fg 260; body & door rings of stainless steel to ss aisi 304 , hinge pin of ss aisi 304, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges drilled to is 1538 table 4 & 6.(moc & tc needed for valve)., 100 mm dia dismantling joint pn-1.0 ci dismantling joint complete galvanised , stud, nut and washer and follower flanges, drilled to is:1538 table 4 & 6. ( at delivery side of pump ), supply & fixing of perforated gi cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. s&f gi connector, 6mm dia ms suspender, bolts & nuts, steel fastener etc. as required of the following size. incl. al painting of ms support. [200x50x1.25mm x 3mtr long (18swg)] [app

State Government

CTN :40072880

13 May, 2025 NA

Basti - Uttar Pradesh

Tender For supply of material and erection of equipments and structure for construction of 01 no. 132/33kv bay at 132kv sub-station harraiya under electricity transmission division-i, basti - supply, pale fencing, earthing 40 mm ms rod for main earthing, earthing 40 mm ms electrodes ( 3 meter longs), m.s. flat for earthing 75x10, m.s. flat for earthing 50x6, air conditioning system, two ton window ac with all accessories and stabilizer(not less than 5kva capacity) with installation, single tension fitting suitable for, acsr moose, acsr panther, single suspension fittings suitable for, acsr moose, acsr panther, pg clamp suitable for, moose/ moose, moose/panther, panther/panther, bus post clamp suitable for, panther, twin panther, moose, lightening fixture led luminaries type sl-di as per tech specifications, work, erection of main & auxiliary structure consisting of column. beam peak, mast etc and auxiliary structure of installation of cts, la etc. the job consists of shifting of all materials from store to site of erection and erection of structures as per drawing with the help of gi nut & bolts, flat & spring washer with matching the hole, cutting & matching of member if required, including cost of all men and t&p excluding gi structure nut & bolts to complete the work. gi structures, nut & bolts and washer will be provided by department free of cost., erection of 145 kv equipments, 145 kv bus/line and tandom isolator, 145 kv current transformer, 145 kv post insulator, 120 kv lightening arrestor, 145 kv ct junction box, 132 kv transformer (c&r) panel, 145 kv sf-6 circuit breaker, erection of 33 kv equipments, 33 kv vacuum circuit breaker, 33 kv isolator, 33 kv current transformer, 33 kv lightening arrestor, 33 kv ct junction box, stringing of three phase jack bus 132 kv with panther conductor. the work includes cutting & bending of conductor, fixing of single/double bolted type tension fitting/suspension. hoisting of disc insulators and shifting of material from store*site to erection site and all other associated work to complete the job satisfactorily as per instruction of engineer incharge., 132 kv jack bus for transformer, 132 kv making of u jumpers, equipments interconnection jumpering with main bus bar. job includes bending of conductor in proper shape tightening with the help of clamps and all other associated work to complete the job., transformer bay for 132 & 33 kv side, laying and termination of following size control cable in trench/cable trays from different control room c&r panels to switchyard equipments (132/33 kv cb, ct their junction boxes . transformer marshalling etc) in 132/33 kv switchyard as per cable schedule including carriage of cable drum from store and all other associated work., 2cx2.5mm2, 4cx2.5mm2, 6cx2.5mm2, 10cx2.5mm2, termination of control cable ( per termination), cutting strengthening bending and laying 700 mm/500 mm below inside ground and above ground of following size m.s. flat for earthing of main and auxiliary structure and equipments including welding with main earth mat and with objects to be earthed, excavation trenches and back filling painting and all other associated work as required to complete the work satisfactorily. m.s. flat will be providing by the contractor free of cost., 75x10 mm, 50x6 mm, making delta earthing of 120 & 33 kv la by fabrication of 03 nos 3 mtr m.s. round bar ( 36/40 mm dia) electrode it piercing inside the ground and connecting all 03 nos electrodes with 36/40 mm m.s. round laying around as per drawing painting the jointing with 75x10 mm m.s. round bar laying around as per drawing. painting the joints with black japan paint of good quality after proper cleaning of joints by wire brush ms round bar will be provided by dept, free of cost., dismantling of 250k.va 33/0.4k.v station t/f work includes opening of jampers/cable connection/cutting of earthing etc., laying of 300/400mmsq. 3.5core power cable from control room t

Central Government/Public Sector

CTN :40086126

13 May, 2025 21.36 Lacs

Raebareli - Uttar Pradesh

Tender For rate contract for supply of orthotic and prosthetic consumables - orthotic consumables, polypropylene sheet (thickness 3 mm x 2 mtr x 1 mtr), polypropylene sheet (thickness 4 mm x 2 mtr x 1 mtr), polypropylene sheet (thickness 5 mm x 2 mtr x 1 mtr), polypropylene sheet (thickness 12 mm x 2 mtr x 1 mtr), low temperature thermoplastic (lttp) (thickness 3 mm, 45cm x 60cm), low temperature thermoplastic (lttp) (thickness 4 mm, 45cm x 60cm), cotton stockinette (30 mm, length 10 mtr), cotton stockinette (60 mm, length 10 mtr), cotton stockinette (120 mm, length 10 mtr), cotton baniyan cloth (high quality, width 12"), velcro strap (hook & loop fastener) (width 1", length 25 mtr), velcro strap (hook & loop fastener) (width 2", length 25 mtr), aluminium sheet (thickness 1 mm 4ft x 4ft), aluminium strip (thickness 4 mm width 3/4" 12ft), ethaflex (thickness 2 mm, size 1.5m x 1m), ethaflex (thickness 3 mm, size 1.5m x 1m), ethaflex (thickness 4 mm, size 1.5m x 1m), ethaflex (thickness 6 mm, size 1.5m x 1m), pe-lite sheet (6mm x 110 cm x 73 cm), pe-lite sheet (3mm x 110 cm x 73 cm), copying pencil (marking pencil over pop and wood), copper rivets (3 mm), copper rivets (4 mm), aluminium rivets (4 mm), screw nuts and bolts (4 mm), button rivets (9 mm x 9 mm x 9 mm), button rivets (12 mm x 12 mm x 12 mm), washer (stainless steel, m3), washer (stainless steel, m4), oval buckle ring (size- 1"), oval buckle ring (size- 2"), nylon webbing (width 1"), nylon webbing (width 1.5"), nylon webbing (width 2"), strap- width 1" (nylon strap with velcro, length 8"), strap- width 1.5" (nylon strap with velcro, length 12"), strap- width 2" (nylon strap with velcro, length 14"), elastic webbing (width 2"), dendrite solution (adhesive (1l container), chrome leather (chrome), napa leather (softy) (napa (soft), thickness 0.3 mm), microcellular rubber (mcr) (1m x 1m x 10 mm), rubber sole (nbr sheet, 3 mm x 1 mtr x 0.5 mtr), brown paper (120 gsm, 32"x 10 mtr), drill cloth/fabric (10 mtr roll), sanding drum (length 180-200 mm outside diameter 72.5 mm rubber drum), sanding sleeve (sanding sleeve compatible with drum 24 grit, 40 grit, 60 grit, 80 grit, 100 grit, 150 grit), plaster of paris powder (30 kg packet), afo ankle joint (articulated afo ankle joint, adult 20 pair), afo ankle joint (articulated afo ankle joint, paediatric 20 pair), kafo kit (stainless steel knee joint with aluminium uprights and leather knee cap size i), kafo kit (stainless steel knee joint with aluminium uprights and leather knee cap size ii), kafo kit (stainless steel knee joint with aluminium uprights and leather knee cap size iii), hkafo kit (stainless steel knee joint with aluminium uprights and leather knee cap size i), hkafo kit (stainless steel knee joint with aluminium uprights and leather knee cap size ii), hkafo kit (stainless steel knee joint with aluminium uprights and leather knee cap size iii), prosthetic consumables, epoxy resin and hardener (hardener compatible with the resin (10 kg bottle), pigment/dye (tan, beige colour, resin compatible, fibreglass mesh fabric (for lamination, carbon fibre fabric (for lamination, pvc film (width 4ft, thickness 0.1-0.25 mm, thinner (1 litre duco bottle, talcum powder (500-750 gm, stretch film wrap (thin plastic film used for casting, 10 cm and 12cm wide and length 250 m, plastozote sheet (10 mm x 1m x 1m, cash brace (cash brace, transtibial (bk) endol kit (modular) (sach foot adapter, tube adapter, tube clamp adapter, socket adapter, bk foam cover (eva foam with good grinding property, conical in shape, cosmetic stocking (elasticated nylon, bk suspension/ knee sleeve (neoprene, 3/16" thickness, transfemoral (ak) endo kit (modular) (four bar linkage knee joint with tube clamp, 3 prong lamination anchor,tube adapter long, sach foot adapter), ak foam cover (preshaped eva , water proof(small,medium,large), ak cosmetic stocking (elasticated nylon), tes belt (neoprene small/medium/ large), ranger foot (wooden keel, pu moulded, weight bear

Towing Hook Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors