Latest towing hook Tenders | Government towing hook Tenders

Central Government/Public Sector

CTN :45732059

08 Jul, 2026 NA

Kapurthala - Punjab

Tender For set of flat roof for hs spart medical van coaches, as per drawing: mp26mvfr version 0, packing instruction: 1. the supplier shall pack the roof complete in a suitably designed returnable fixture in such a way that roof complete shall not get scratched, damaged, twisted during transportation, storage and lifting and to avoid scratches onouter surface. it should be wrapped with enviroment friendly material and it should have standard clamping /fastening mechanism so that it can be opened easily. it should have firm's identification mark. 2. first returnable fixture along with roof complete beretained by rcf & this fixture shall be exchanged in the second lot supply and so on. atthe end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated having sufficient strength to bear approximate 2 tonne load in static & moving condition of one coach set of roof complete. 4. the fixture /frame/pallet should be designed so that the packed roof complete remain in position to minimize surface area. 5. it should also be suitable for storage of roof complete under open sky. [ warranty period: 30 months after the date of delivery ] ]

CTN :45730148

13 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply, installation and commissioning of aerosol based fire detection & suppression systemcartridges, one set consisting of cartridges (1)8/10 gm cartridge-01 piece in onboard panel (2) 100 gm cartridge piece in underslung panel of lhb non ac coaches as per technical parameters as per annexure g1 ofrdso specification no. rdso/pe/spec/ac/0192-2018 (rev.1) or latest. makes: which have been enlisted in the bill of material for fire suppression cartridge after 17.09.2021 to till tender opening date. these shall be installed in electrical panels of non-ac lhb coaches. all necessary modification, clamping arrangement including bracket pieces& accessories required for fixing & installation of these items shall be with the scope of supplier. total-02 nos. of cartridges required for one coach as one set. (one set consists of 02 cartridges of capacity 8/10gm 01 no., 100gm cartridge -01no.) note: location of aerosol fire cartridge in the electrical panels shall be as per drawing mentioned in rdso letter no. el/7.1.108/sbc main dt.07/01/2022. material supply as per latest temperature guideline as attached. [ warranty period: 30 months after the date of delivery ] ]

CTN :45707566

03 Jul, 2026 NA

Parganas - West Bengal

Tender For supply of casing assy lh head light part no 255b8403181b, catch hood top complete part no 2148402680, chain pawl split pin comp towing hook a part no 255b2707222, channel run side door window drop glass part no 2146103268, connector 3 terminal part no psi3723000a2, cover battery container part no 255b3703170b, cover gear lever 3 type part no nk, door inner handle part no niv-3253, door lock lh & rh part no dmd-niv-3254, door outer handle part no niv, door rear weather strip part no 2146107042b1, door window drop glass gasket part no 2146103218, elastic resilient part no 255b2806030, emblem manufacture part no 2148401300b1, flange door outer handle part no 212a6105160, fuel level indicator transmitter switch part no 2143806014p19a2, handle regulator part no nk, hose assy part no 214b3506135, lever assy back rest part no 25686804088, link slotted wind shield part no 2145204012, lock part no 25686804103, lock part no 25686804104, mirror part no 2568201012

State Government

CTN :45520196

03 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45520197

03 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

Central Government/Public Sector

CTN :45708375

15 Jul, 2026 NA

Multi City - Multi State

Tender For supply of mov 20mm dia for 25v ac/31v dc supply with maximum clamping voltage of 77v at 20a and peak single puls(8/20us) rating of 2ka. epcos, littelfuse or similar make (s20k25:24vdc).approval of sample material should be taken from consignee before bulk supply. material should be supply at consignee depot sse/s/m/jbp . this item is not available in gem . [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45681767

24 Jul, 2026 NA

Kapurthala - Punjab

Tender For set of carline for lhb gs amrit bharat coach. note:-(1)special condition as per annexure-abc dy cple-iii letter no. rcf/hsq/plg/mpsh/510003 dated 27/05/2024., as per drawing: mp24clwwgs version 1, packing instruction: pi185 version 02 carline assly:- the supplier shall pack the one c/set (segments) of carlines in a suitably designed robust returnable mettalic cage/ structure in such a way that carlines shall not get entangled, damaged, twisted , dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable enviroment friendly cushioning material is to be placed between two segmemts. transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate one tonne material load in static & moving condition of one coach set of carline. the bottom part of this packing cage//pallet should be such that curvature profile of bottom carline should match with the profileof packing cage and it can accomodate fork lifter arms for lifting & transportation. itshould have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's dentification/colour mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description , drg no./spec., qty., firm's name & address and despatch dateetc. for identification. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45681768

24 Jul, 2026 NA

Kapurthala - Punjab

Tender For integrated wtcc for lhb bangladesh non ac chair car coachesnote: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: bje10501 alt 'a',packing instruction: 1. the supplier shall pack the integrated wtcc in a suitably designed returnable fixture in such a way that integrated wtcc shall not get scratched, damaged, twisted during transportation, storage and lifting and to avoid scratches on outer surface. it should be wrapped with enviroment friendly material and it should have standard clamping /fastening mechanism so that it can be opened easily. it should have firm's identification mark. 2. first returanable fixture along with integrated wtcc be retained by rcf & this fixture shall be exchanged in the second lot supply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixturefrom rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 1 tonne load in static & moving condition of two coach set of integrated wtcc. 4. the fixture /frame/pallet should be designed so that the packed wtcc remain preferably in horizontal position to minimize surface area. 5. it should also be suitable for storage of integrated wtcc under open sky. [ warranty period: 30 months after thedate of delivery ] ]

CTN :45333001

27 Jun, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of 10341820 lv7 stln 2520 012465 x 3970100 series propeller shaft fasteners , 10334016 lv7 stln 5120 424220 x 3968800 wrench adjustable , 10609909 w17 mpt ee 480021400900 driven plate assembly pto 75 hp , 10369604 x3 ixc pk 30430 air filter assy , 10348611 lv7 t 815 722 923 110 206 gasket , 10318958 lv7 t 815 990 500 055 000 sealing ring , 10335026 lv7 t 815 4x4 443 859 012 000 vehicle fuse 25a , 10318081 lv7 t 815 273 112 040 021 cup 443 962 503 105 , 10327346 lv7 t 815 443 962 103 054 packing valve , 10321009 lv7 t 815 tpe sv 166 76 cap nuts 2 , 10339142 lv7 t 815 442 053 990 424 guide insert , 10324037 lv7 t 815 443 960 601 026 body valve with opening , 10324569 lv7 t 815 442 953 180 134 hose dia 5x8 960 mm , 10340738 lv7 t 815 442 054 440 174 bushing , 10313855 lv7 t 815 130 054 390 604 protective bag , 10342862 lv7 t 815 443 912 200 603 piston , 10348977 lv7 t 815 130 076 855 804 line from air reservoir , 10354143 lv7 t 815 442 076 851 594 line to pressure gauge , 10321793 lv7 t 815 tpe sv 141 74 air heater ov , 10328626 lv7 t 815 442 053 015 614 return oil tube , 10306525 lv7 sca 562317 spring , 10306912 lv7 sca 562465 nipple , 10300633 lv7 sca 396021 fire ext 285351 , 10306550 lv7 sca 562332 symbol sign , 10526243 lv7 sca 562333 symbol sign , 10307099 lv7 sca 211779 low pressure indicator , 10306843 lv7 sca 562395 angle nipple , 10305906 lv7 sca 397422 lift loop , 10306633 lv7 sca 173554 relay , 10301914 lv7 sca 562103 link , 10302510 lv7 sca 1314406 water pump , 10324827 lv7 t 815 442 076 633 224 fuel supply tube , 10339575 lv7 t 815 443 755 520 200 pump 24 v , 10320381 lv7 t 815 130 077 400 674 set of gaskets , 10303259 lv7 sca 562025 o ring , 10303918 lv7 sca 87125 extractor for injector gasket , 10304277 lv7 sca 562612 connector female , 10307331 lv7 sca 1391897 repair kit for fuel pump free filter , 10300669 lv7 sca 248946 cable holder , 10301277 lv7 sca 259275 shaft , 10301886 lv7 sca 246856 control lamp coolant temp , 10307029 lv7 sca 562202 o ring , 10303215 lv7 sca 98455 washer or assy totl for piston transfer , 10307038 lv7 sca 806313 lubricator , 10303143 lv7 sca 305166 damping capacitor , 10300584 lv7 sca 248940 carbon brush , 10303508 lv7 sca 40607 rubber damper , 10304412 lv7 sca 274717 bearing holder , 10306441 lv7 sca 562277 spring , 10301556 lv7 sca 220426 cable plus , 10307414 lv7 sca 562244 o ring , 10357137 lv7 krz 210e 3901519 a double end wrench 22x24 , 10609911 w17 mpt ee 480021400800 driven plate assembly 75 hp , 10547360 k7 4210 000035 coupling fire hose instantaneous male , 10325940 lv7 itr beml 2540 001996 50 95 hook towing hook assy for scotch block , 10024291 tool kit cvd 130978710014 splitting axe c w handle , 10024289 tool kit cvd 130978690014 shovel , 10024332 tool kit cvd 150261008004 medicine box , 10325848 lv7 t 815 4x4 443 400 320 000 wind screen electric motor 8tw 005 , 10329820 lv7 t 815 4x4 443 655 032 000 high pressure hose js 10x300 hvi , 10343307 lv7 t 815 443 919 632 501 separator , 10342827 lv7 t 815 dmd nk 4074 indicator glass , 10332099 lv7 t 815 130 045 360 504 piston , 10328054 lv7 t 815 443 124 086 010 wiper lever age , 10316018 lv7 t 815 993 050 393 0 block cylinder , 10315246 lv7 t 815 993 101 055 000 voltage regulator , 10305525 lv7 sca 562572 //bid details 2 / 117 connection , 10305728 lv7 sca 387266 gasket , 10301381 lv7 sca 218513 strap , 10307505 lv7 sca 378291 exhaust out let , 10306662 lv7 sca 562417 banjo screw , 10302322 lv7 sca 264467 sleeve , 10303630 lv7 sca 1100676 bushing , 10306595 lv7 sca 562370 clamp , 10300997 lv7 sca 229020 t connector , 10303369 lv7 sca 562042 bolt , 10301717 lv7 sca 562139 spacer tube , 10307374 lv7 sca 99040 adaptor extenxion socket for 587434 , 10305686 lv7 sca 387260 gasket , 10302928 lv7 sca 280676 cyl head with valve seat , 10302172 lv7 sca 263627 oil separator filter , 10302549 lv7 sca 261278 holder , 10301250 lv7 sca 258986 pressure limiting valve , 10304480 lv7 sca 275584 container , 10305449 lv7 sca 266117

CTN :45662043

07 Jul, 2026 44.41 Lacs

Sultanpur - Uttar Pradesh

Tender For running contract for deposit works under edd-jaisinghpur, sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., pg clamp, guarding angle clamp., barbed wire g.i., stay loop insulator/guy insulator., bolts, nuts & washers all sizes., l.t. connector (pearcing)., gi pipe 6" dia, hdpe pipe 120mm., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 09 mtr. long., safe carriage of stp 11 mtr. long., safe carriage of pcc pole 8.5 mtr. long., safe carriage of pcc pole 09 mtr. long., safe carriage of pcc pole 11 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of acsr rabbit conductor., safe carriage of 11 kv xlpe cable al. 3x70/3x120/3x185/3x240 sq.mm., safe carriage of lt abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 10/16/25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp 09 mtr. long from site to pit point., dragging of stp 11 mtr. from site to pit point., dragging of pcc pole 8.5 mtr. from site to pit point., dragging of pcc pole 09 mtr. from site to pit point., dragging of pcc pole 11 mtr. from site to pit point., fabrication & erection of single pole support on st pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on st pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 8.5 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 8.5 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., stay complete with concreating as per respo norms., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc as per respo norms., laying stringing & sagging of new acsr rabbit conductor including binding jumpering etc as per respo norms., digging of trench & laying of cable 11 kv xlpe cable 3x70/3x120/3x185/3x240 sq.mm including sands & brick as per respo norms., laying of cable with hdd method using with hdpe pipe (120mm od pn-4 pe 80 grade uv stabilized hdpe pipe as per is: 4984 of 6 metre) 11 kv xlpe cable 3x70/3x120/3x185/3x240 sq.mm as per respo norms., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x70/3x120/3x185/3x240 sq.mm xlpe 11 kv cable (cost

Towing Hook Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector