Latest traffic benchmark Tenders | Government traffic benchmark Tenders

Central Government/Public Sector

CTN :41725459

30 Oct, 2025 NA

Hyderabad - Telangana

Tender For corrigendum : magnetic particle inspection machine

CTN :42298598

31 Oct, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : providing of custom bid for services - custom bid for services - valce salvaging job; f work covers salvaging of defective sc valves and restoring them for reuse as per standard procedures and instructions of the officer-in-charge. the contractor shall carry out the following activities in a safe, systematic, and accountable manner: 1. salvaging operations salvaging of defective sc valves shall be carried out as per laid-down procedures using the valve test bench and/or any other equipment or method advised by the officer-incharge. the contractor shall collect defective sc valves from the store after obtaining necessary approvals. 2. cleaning & preparation clean all defective sc valves in the ultrasonic valve cleaning machine and/or other approved valve cleaning systems. ensure all valves are thoroughly cleaned to remove dirt, oil, or contaminants before testing. segregate cleaned valves properly for further inspection and testing. 3. segregation & testing segregate valves based on their source (e.g. hot repair, defective, pin leak, scrapable cylinders, etc.). perform low pressure and high pressure testing of the valves as per laid-down procedures and test parameters. identify valves that are fit for reuse and those that are defective/rejects. 4. salvaging & assembly replace the old o -ring washer of all good salvaged valves with new o -ring washers (to be provided by hpcl). fit safety caps and back covers on the salvaged valves to protect them from dust and contamination. ensure salvaged valves are clean, properly assembled, and ready for storage. 5. storage & documentation arrange salvaged valves type-wise in a countable and organized manner and deposit them in the stores. ensure proper handling to avoid damage or mixing of valve categories. maintain shift-wise records of: o number of valves received, o number of valves cleaned, tested and salvaged, o number of valves rejected. 6. manpower & productivity contractor shall provide minimum one manpower per shift. a minimum target of 400 sc valves shall be salvaged per manpower per shift. inventory of defective valves pending salvaging shall not exceed one day s generation. 7. materials & consumables hpcl shall provide o -ring washers, safety caps, back covers, and other reusable fittings. kerosene and other cleaning consumables shall be supplied by the vendor. contractor shall ensure availability of all tools and accessories required for smooth execution. 8. certification & payment the shift officer shall certify the salvaged quantity at the end of each shift. payment shall be made strictly on actual quantity salvaged and accepted by hpcl. any deviation or failure to meet daily targets may attract penalty as per tender terms. 9. safety & compliance all activities shall be carried out in compliance with hpcl safety norms and oisd guidelines. personnel shall wear required ppe (gloves, goggles, shoes, helmet) during operations. all salvaging and testing activities shall be conducted under the supervision of hpcl personnel.

CTN :42142544

21 Oct, 2025 NA

Chandrapur - Maharashtra

Tender For corrigendum : supply of pump operator trade c c - ladle 150mm dia. , left cut strips 250mm , level bottle spirit 150 ml. , lifting jack screw type 3 ton capacity , magneto spanner set with 8 spanners , magnifying glass 75mm , manila ropes 12,20,30 mm dia. , masonary bit assorted upto 12 mm , master test bars different size , megger 500 v , mobile crank , multimeter digitl , oil stone 15 cm x 5 cm x 2.5 cm , pipe cutting tool , pipe wrench 45 mm , plumb bob , pneumatic scaper with adjustable stroke , portable electric drill machine , portable jack , prick punch 15 cm , punch letter 4mm number , scientific calculator , screw jacks , shear tin mans 450mm x 600mm , solid parallels in pairs different sizes in metric , spanner oyburn 15 cm , spark plug spanner 14mm x 18mm size , square box wrenches , square t wrenches , srdg ball bearing, drg ball bearing, sel aligning ball bearing , steel measuring tape 10 meter in a case , stud extractor set of 3 , stud remover with socket handle , surface guage with dial test indicator plunger type i.e. 0.01 mm , tachometer counting type , telescope guage , temperature guage 0-100 deg c , thermostat , three cell torch , three phase 50 hz 5 mp ac squirrel gage induction motor with star delta starter , torque wrenches 5 to 35nm and 50 to 225 nm , trammel 30 cm , tube expander up to 62 mm , universal puller for removing pulleys, bearings , vibrometer , vice grip pliers , voltmeter ac to 500 v , wall hoists , hydraulic leak testing equipment , injector testing set hand tester , liquid penetrant inspection kit , multi stage pump , overhead tank pump, minimum 5000 litres with level indicators and piping layout , pipe bending machine hydraulic type 12mm to 30mm , pneumatic rivet gun , reciprocating pump working for dimantling and assembling , spring tension tester , submersible pump set, eight stage upto 10 kw per 1.5 hp , trolley type portable air compressor single cylinder with 45 litres capacity air tank , welding plant oxy acetylene complete high pressure , welding transformer 150-300 amps

Central Government/Public Sector

CTN :42386287

07 Nov, 2025 NA

Bhusawal - Maharashtra

Tender For devlali- sch(i) dvl-provision of inspection pit-600m at devlali. sch(ii) provision of yard drain bedevlali-replacement of gang hut at devlali in connection with kumbh mela-2027. tween sick line 1-2 & stabling line1-2 and connecting drain at devlali. sch(iii) provision of approach road (700x7m) for sick/stabling line at devlali. sch(iv)devlali-replacement of sse(p-way) office at devlali in connection with kumbh mela-2027. sch(v)devlali-replacement of gang hut at devlali in connection with kumbh mela-2027. sch(vi)devlali-replacement of track machine hut at devlali in connection with kumbh mela-2027. sch(vii) devlali station-proposed construction of 15 unit rb-ii staff quarters on replacement account under sse(wks)nkrd road juridiction in connection with devlali-provision of c&w examination and stabling facilities for kumbh mela 2027.(id no.01.01.16.25.3.50.014)

CTN :42283498

24 Oct, 2025 NA

Kanchipuram - Tamil Nadu

Tender For providing of customized amc/cmc for pre-owned products - customized amc/cmc for pre-owned products - galley equipment; various brand; comprehensive maintenance contract (cmc); 24 hour response; yes--work for contract for annual maintenance contract of galley equipment at ins pallava-1. the contractor shall carry out preventive maintenance of the following, equipment every quarter: -, 1.1. cooking & heating equipment: -, - ss bme 304 grade hot bain marie, - electric hot plate (galley & wr), - 5 burner gas range (120"30"24"), - 2 burner gas cooking range with storage platform, - semi-automatic bench type industrial oven (3 deck), - electric griller chicken, - microwave oven / lg 30 ltrs mc 808, - food storage heating element electric with 04 containers (6kg, 304, grade ss), tasks:, - cleaning of heating surfaces and trays, - inspection and calibration of thermostats (half yearly), - checking and tightening of electrical terminals, - replacement of heating coils, knobs, and switches if required, - inspection of insulation and safety cut-off systems, - cleaning of exhaust vents and heat dispersion units, page 5 of 10, 1.2. mixing & processing equipment: -, - domestic blender/dough kneader sbwg 1500 watt 40 kgs, - cast iron commercial mixer 5 ltr, - wet grinder 10 kg cap, - pulvariser machine with stand, - vegetable cutting machine (up to 200 kgs), - potato peeler automatic 1.5 kw, tasks:, - cleaning of blades, jars, and grinding surfaces, - lubrication of moving parts, - inspection of motor windings and bearings, - calibration of speed controls, - replacement of belts, couplings, and safety covers, 1.3. refrigeration & cooling equipment: -, - ss icecube machine, - microwave oven, tasks:, - cleaning of condenser coils and drip trays, - checking refrigerant levels and gas charging (if required), - calibration of thermostats (half yearly), - inspection of compressors and insulation, - replacement of filters and seals, page 6 of 10, 1.4. exhaust & ventilation systems: -, - exhaust system for gas range, - exhaust hood with filter box and accessories, - 5 hp motor blower, tasks:, - cleaning of filters and ducts, - inspection of motor and fan bearings, - tightening of electrical connections, - replacement of worn-out belts and blades, - checking airflow and suction capacity, 1.5 cleaning & hygiene equipment: -, - wet and dry duty cleaning industrial vacuum cleaner 220smvco1, - commercial dishwasher with dryer model deb424fp, tasks:, - cleaning of filters and tanks, - inspection of pump and motor assemblies, - descaling of internal components, - replacement of hoses, nozzles, and seals, - electrical safety checks, 1.6. lpg gas system, page 7 of 10, 2. defect rectification of all machines including replacement of defective parts., 2.1 all replaced parts/compounds should be branded make and should have a, guarantee of one year from the date of renewal., 2.2 the contractor is required to attend the defect within 24 hours of reporting the, defect through telephone., 2.3 spares using for maintenance of equipment should be the oem make., 2.4 repairs / replacement of any items should be carried out as per the actual site, requirement / technical necessity., 2.5 rate quoted is inclusive of all taxes, freight charges, packing charges, spares,, transportation, service charges etc., 3. comprehensive coverage includes, - free overhauling: as per unit requirement., - free spares: due to wear and tear during contract period., - free labour: for all listed equipment., - free electrical wiring: internal wiring repairs., - free fan motor repairs: including winding and bearing issues., - free chemical washing: during overhauling., - free transportation: for off-site servicing., - free compressor & gas charging: for refrigeration units.,

CTN :41540491

25 Oct, 2025 NA

Ernakulam - Kerala

Tender For corrigendum : supply of multi product calibrator ( 61/2 digit) (pt no 5560a) , insulation tester 500v (pt no-5g/203) , dc power supply (pt no-10k/9331293na) , hand held multi meter 4.5 (pt no-hp3468a) , temperature and humidity indicator (pt no-5a/3820 na) , stand universal (pt no-63b/412 na) , dti stang magnetic (pt no-1b/5168 na) , dial indicator test(pt no-1b/5150 na) , slip gauge (metric) (pt no-63b/62 na) , level spirit adjustable(0-150) (pt no-1b/4235 na) , mirror inspection jointed (pt no- cf143 a) , caliper micrometer inside(2-12" ) ( pt no-1a/2733na) , micrometer outside (0-150mm) (pt no-1a/2732 na) , micrometer inside (caliper type) (pt no-1a/2721 na) , surface plate 36" x48" (pt no-1b/4173 na) , vernier depth gauge (0-200mm) (pt no-1a/3906 na) , cylinder bore gauge (6-10mm) (pt no-1b/4561-5 na) , filler gauge taper mm (pt no-1b/4600 na) , micrometer outside (pt no-1a/9100073 na) , hand magnifying glass (pt no-1b/niv/mg) , clinometer (pt no-1a/4046 na) , combination set (pt no-1b/1816 na) , electronic torque wrench tester (pt no-6c/0101 na) , engineering tool (pt no-1l/0001 na) , quick vice 5" (pt no-1c/2607-1c9506589-na) , tensiometer calibrator (pt no-63b/103 na) , weighing machine (pt no-6c/3849na) , weight 100gm-50 kg (25 in no. ) (pt no-63b/0014 na) , spring balance 1-10 kg (pt no- 1h/niv/sp) , gauge screw thread (pt no-1b/4048 na)

CTN :42353665

28 Oct, 2025 NA

Hyderabad - Telangana

Tender For supply of battery operated manual metal annual rate contract welding machine,auto darkening welding helmet,welding consumables,welding gloves,foldable weld protection screen,clamps for holding objects,portable welding table,weld inspection aid,spot check penetrant testing kit,rust removal cleaner 5 liters,electrode holder,earth clamps,safety gloves,electrode drying oven 10kg capacity,welding safety jacket,cable 50 sq mm,welding safety shoes

CTN :41076665

20 Oct, 2025 NA

Pulwama - Jammu And Kashmir

Tender For bid to ras bid to ras corrigendum : supply of installation testing and commissioning of x ray baggage inspection system - x ray baggage scanner tunnul size 600mm x 400mm , ups 3kva , roller table for both side of machine with 50cm length , ai enabled software , stabilizer 3kva , installation testing and commissioning

Central Government/Public Sector

CTN :42372427

10 Nov, 2025 NA

Bokaro - Jharkhand

Tender For fabrication, manufacture, inspection, testing and delivery of dry gunniting machine and portable air compressor _pkg. no. sm-405_ on f.o.r. bokaro steel plant site basis required for rebuilding of coke oven battery no. 6 at sail, bokaro steel limited, bokaro, jharkhand.

State Government

CTN :41988806

27 Oct, 2025 NA

Chennai - Tamil Nadu

Tender For corrigendum : procurement of bdds equipments for greater chennai police - procurement of bdds devices, multi rf bug detector, under vehicle scanning system, portable x-ray machine (real time viewing machine), hook and line set, search light, extension mirror, bomb suite, buster density meter, deep search metal detector, bore scope - inspection equipment with video camera, hollyland solidcom se-8s, bomb basket

Traffic Benchmark Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government