Latest transmission pole Tenders | Government transmission pole Tenders

corporations/Associations/Others

CTN :45263426

03 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For dcw ht/lt line shifting of exg double pole r.k.nagar dp switch at 11 kv lakshmipuram feeder requested by the comissioner vellore corporation, vivekanadar street, radhakrishana nagar, katpadi tk and others 9 nos work (2.eos-thiru.a.hafeezur rahman, domesti sc 16 nos 3 phase, hafeez domestic apartment, kangeyanallure, 3.dcw-thiru.r.ramesh lakshmipuram, kangeyanallur, 4.dcw-thiru.v.samuval rajkumar, vaibhav co-op nagar phase-iii, 5.dcw-tmty.k.malathi, vellaikalmedu, kangeyanallure, katpadi, 6.dcw-tmty.g.selvi, dharapadavedu, katpadi, 7.dcw-tmty.k.lavanya, kangeyanallure, katpadi, 8.dcw-tmty.daisy elizabth, v.g.rao nagar, katpadi, 9.dcw-tmty.kalaiarasi, kangeyanellure, katpadi, 10.dcw-thiru.r.rajendiran, gandhi nagar, katpadi) in respect of je/urban/east/gandhi nagar section.

corporations/Associations/Others

CTN :45156832

26 May, 2026 NA

Thoothukudi - Tamil Nadu

Tender For execution of works with supply of materials for provision of 33 kv source feeder to serakuam ss by erecting of 33kv line to be tapped off from the existing 33kv moolakaraipatti palaniappapuram feeder from moolakaraipatti ss - fixing of 33kv ht disc with metal partserection of ht line with acsr 6/4.72 (dog) with 50% lc workalteration of clamperection of 33kv double pole dp structureerection of cradle guarding

State Government

CTN :45279132

04 Jun, 2026 1.66 Crore

Udhamsign Nagar - Uttarakhand

Tender For work of construction of a new 11 kv feeder for bifurcation of overloaded 11 kv chakarpur feeder under edd khatima in capital s.i. head, including supply of decentralized materials, as per tender specification. - annexure-a (supply of following material as per upcl norms.), bracing clamp for sp-55 with nut and bolt., pp & clamp with nut and bolt st pole sp-55., stay clamp for sp-55 with nut and bolt., pp & clamp with n&b st pole sp-72., pp & clamp with n&b pcc pole, 8.5 mtr., stay clamp for pcc pole., ht stay insulator., 33 kv suspension ties on every pin insutlator., ipc with aluminium bail for earthing., 11 kv ipc for covered to covered cond., 11 kv ipc for covered to bare conductor., 11 kv mid span jointing kit., 11 kv aaac covered cond. al-59, 99 sq.mm., 11 kv tension clamp with bail & ipc., annexure-b (following work as per upcl norms), chemical earthing., fabrication of steel., excavation of pit for stay set., erection of 11 kv stay set,, grouting of stay set., excavation of pit for pole., erection of single pcc pole., erectin of single sp-55 pole., erection of single sp-72 pole., erection of pcc double pole., erection of sp-55 double pole., grouting of pole., muffing of pole., painting of sp-55 pole., lopping and choppong of tree branchases., cartage of pcc pole, 51-70 k, cartage of sp-55 pole, 51-70 km., cartage of sp-72 pole, 51-70 km., cartage of petty material, 51-70 km., headload cartage of pcc pole, 0-1 km., headload cartage of sp-55 pole, 0-1 km., headload cartage o sp-72 pole, 0-1 km., headload cartage of material, 0-1 km., fixing of 33 kv suspension ties., fixing of ipc with al, bail for earting., jumpering of d/p tpmo, fuse set and t/f., jumper section pole., fixing of 11 kv 90 kn tension clamp b&ipc., fixing of 11 kv ipc for cc to cc cond., fixing of 11 kv ipc for cc to bare cond., fixing of 11 kv mid span jointing kit., laying spreading, stringing aac conductor

State Government

CTN :45296413

06 Jun, 2026 NA

Lalitpur - Uttar Pradesh

Tender For providing of custom bid for services - construction of 11 kv/lt lines, establishment of double-pole lt substations, installation of metering systems, and the shifting of various ht/lt electricity lines in the area of edd, lalitpur under deposit scheme

CTN :45160545

01 Jun, 2026 40.00 Lacs

Anantnag - Jammu And Kashmir

Tender For rate contract for supply of materials and execution of various maintenance works, as and when required during emergency in electric division anantnag kpdcl for the fy year 2026-27 - supply, erection, testing & commissioning of s.t pole 11mtr. long sp-56 with base plate & cap for ht. strictly as per rec standards, erection, testing & commissioning of s.t pole 11mtr. long sp-56 including its carriage from divisisonal store to site, supply, erection, testing & commissioning of s.t pole 9mtr long sp-33 with base plate & cap for ht. strictly as per rec standards, erection, testing & commissioning of s.t pole 9mtr long sp-33 including its carriage from divisisonal store to site, supply, erection, testing & commissioning of s.t pole 8mtr long sp-15 with base plate & cap for lt. strictly as per rec standards, erection, testing & commissioning of s.t pole 8mtr long sp-15 including its carriage from divisisonal store to site, providing of hydraulic crane on hire basis for loading/unloading of dts of different capacities inclouding fuel and operator faling in the juridection of ed anantnag, erection, testing & commissioning of pcc pole 8mtr long including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 100mmsq (dog) conductor, laying, stringing, tensioning & binding of acsr 100mmsq (dog) conductor including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 50mmsq (rabbit) conductor, laying, stringing, tensioning & binding of acsr 50mmsq (rabbit) conductor including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 30mmsq (weasal) conductor, laying, stringing, tensioning & binding of acsr 30mmsq (weasal) conductor including its carriage from divisisonal store to site, providing & fixing of ismc 100x50x6mm channel iron cross arms for x-mer frame 9long @ 25.2 kg each -1 no including nuts & bolts, fixing of ismc 100x50x6mm channel iron cross arms for x-mer frame 9long @ 18.63 kg each -1 no including nuts & bolts, providing & fixing of ismc 75x40x6mm channel iron cross arms for x-mer frame- 1 nos @18.63 kg each 9 long including nuts & bolts, fixing of ismc 75x40x6mm channel iron cross arms for x-mer frame-, providing ,fixing, of ismc 75x40x6mm x-arm 5 long, fixing, of ismc 75x40x6mm x-arm 5 long-, providing ,fixing, of ms angle iron braces 50x50x6mm-4.5 ft long,, fixing, of ms angle iron braces 50x50x6mm-4.5 ft long, providing and fixing of sprial earthing made of 115 turns of gi wire swg no.8 placed 1.5m below ground level including excavation of pit, refilling the same withsoft soil, fixing of sprial earthing made of 115 turns of gi wire swg no.8 placed 1.5m below ground level including excavation of pit, refilling the same withsoft soil, supply,fixing, testing & commissioning of 11kv link set (polymer) station type as per is standards, fixing, testing & commissioning of 11kv link set station type (polymer/porcelain )as per is standards, supply,fixing, testing & commissioning of 11kv link set heavy duty as per is standards, fixing, testing & commissioning of 11kv link set heavy duty (polymer/porcelain ) as per is standards, supply,fixing, testing & commissioning of 11kv do fuse set (polymer )as per is standards, fixing, testing & commissioning of 11kv do fuse set (polymer/porcelain ) as per is standards, supply,fixing, testing & commissioning of 11kv la set (polymer )as per is standards, fixing, testing & commissioning of 11kv la set (polymer/porcelain ) as per is standards, providing and fixing of lt fuse set as approved by kpdcl., supply,fixing, testing & commissioning of 11kv disc set (polymer) 45 kn complete set, supply,fixing, testing & commissioning of 11kv disc set (porcelain) 45 kn complete set, fixing, testing & commissioning of 11kv disc set (polymer/po

CTN :45275669

28 May, 2026 NA

Rewari - Haryana

Tender For requirement of material at sahlawas store - ht coupling link bolt with rubber bush for 50/60 cs vt pump (no. rb-228-252), ms nut & bolt 4/8x2.5 , pvc tape roll , pvc footvalve 5 with pvc nipple, pvc footvalve 6 with pvc nipple, ms bend 6 , old dhoti, rubber sheet 1/8 , green heliflex pipe 5 , pvc hose pipe 1 dia. (30 mtr), waterproof tarpaulin sheet 18*12, gi wire (wire dia. 3mm), pvc copper wire 6 sqmm single core, pvc copper wire 4 sqmm single core, pvc copper wire 2.5 sqmm single core, 8" dia rubber gasket (for ep set bend), ci nipple with flange 5 , ci nipple with flange 6 , ac contactor 3 pole na25n (bch), flat three core pvc insulated copper cable 6sqmm. (havells/polycab), rubber bush for 125 cs pump (size: id 102mm x od 120mm x l 150mm) as per sample., rubber bush for 150 cs pump (size: id 135mm x od 175mm x l 325mm) as per sample., all terms and condition and make of above items mentioned in bid document. the above rates are inclusive of all kind of taxes including gst.

CTN :45248297

12 Jun, 2026 NA

East Nimar - Madhya Pradesh

Tender For purchase of hardware plumbring electrical etc items in nscgmc khandwa - ac items, cooper pipe (1/4), cooper pipe (3/8), cooper pipe (1/2), cooper pipe (5/8), cooper pipe (3/4), flare nut (1/4), flare nut (3/8), flare nut (1/2), flare nut (5/8), flare nut (3/4), pcb non inveter indoor (according model no.), pcb inveter indoor/outdoor (according model no.), display all ac (according model no.), condensor coil (according size), fan blade (according size), capliery tube and stainer (according size), capacitor 2.5 mfd, capacitor 3 mfd, capacitor 4 mfd, capacitor 36 mfd, capacitor 45 mfd, capacitor 50 mfd, capacitor 60 mfd, contector (according model no.), indoor fan blooer (according model no.), indoor fan moter (according model no.), blooer rubber bush (according size), indoor ewaprator coil (according size), room sensor, coil sensor, condensor sensor, condensor fan moter non inverter, condensor fan moter inverter, drain pipe 1/2 inch, drain pipe 1 inch, refrigrent gas r22, refrigrent gas r410, refrigrent gas r32, nitrogen gas, buitain gas, compressor non inverter (according model no.), compressor inverter (according model no.), pipe insulation (1/4), pipe insulation (3/8), pipe insulation (1/2), pipe insulation (5/8), pipe insulation (3/4), ac stand indoor outdoor, suction discharge wall (1/4), suction discharge wall (3/8), suction discharge wall (1/2), suction discharge wall (5/8), suction discharge wall (3/4), lugs male and female 1.5 mm, lugs male and female 2.5 mm, lugs male and female 4 mm, lugs male and female 6 mm, 4 pole connector 4mm, relay (according model no.), ac filter (according size), belt b 750/b 28, belt a26/696, cable 3core and 4 core 2.5 sqmm, cable 3core and 4 core 4 sqmm, insulattion tap, brazing rod, swim motor inverter (according model no.), swim motor non inverter (according model no.), dummy nut (1/4), dummy nut (3/8), dummy nut (1/2), dummy nut (5/8), dummy nut (3/4), lv items, rj 45 connector heavy quality, power supply 8 channel, power supply 16 channel, 2tb hard disk for recording, 500 gb hard disk, p.o.i. switch (8+2 port) 10/100mbps, p.o.i. switch (16 port) 10/100mbps, connecter 16 amp (16mmsq 750v ac), connecter 32 amp (16mmsq 750v ac), mcb box ht-5way ip65, drain pipe 1/2 inch 20 mm, lugs copper pin type 2.5 sqmm, 1/4 inch copper pipe, 3/8 inch copper pipe, mouse (logitech/hp/dell company), cat 6 cable indoor 305 mtr (d link/finolex company), cat 6 cable outdoor 305 mtr (d link/finolex company), ethernet switch 10/100 mbps unmanaged (8 port), ethernet switch 10/100 mbps unmanaged (16 port), ethernet switch 10/100 mbps unmanaged (24 port), ethernet switch gigabyte (16 port), ethernet switch gigabyte (24 port), poe injector input 200-240 ac output 24 volt 1.5 amp, poe injector input 200-240 ac output 24 volt 0.5 amp, ethernet switch 10/100 mbps managed (l3), 4u rack with spike (d link/legrent company), lawn machine cable 2.5 sqmm armoured, dome camera (ip) 2mp, dome camera (ip) 4mp, bullet camera (ip) 2mp, bullet camera (ip) 4mp, nvr 32 channel, dual band wi-fi, micro sd card 64 gb, pen drive 32 gb, pen drive 64 gb, pen drive 128 gb, desktop switch 16 gbps, desktop switch 24 gbps, hdmi to lan convertors 60 mtr, hdmi to lan convertors 90 mtr, hdmi cable 5 mtr, hdmi cable 10 mtr, hdmi cable 15 mtr, hdmi cable 20 mtr, hdd external 2tb, hdd external 4tb, hdd (surviellance) internal 4tb, hdd (surviellance) internal 6tb, l2 switch 24 port (managed), poe switch 1gbps 16 (unmanaged), poe switch 1gbps 24 (unmanaged), poe switch 10/100 8 (unmanaged), poe switch 10/100 16 (unmanaged), media convertor 1 gbps (single core ofc), media convertor 10/100 mbps (single core ofc), xlr male to female, xlr female to female, xlr male to male, xlr male to jack 6.25mm, xlr female to jack 6.25mm, xlr male to stereo 6.25mm, xlr female to stereo 6.25mm, solid state drive 128gb, solid state drive 256gb, solid state drive 512gb, solid state drive 1tb, camera square box, fiber cabel 4 core (usha martin finolex company), fiber spl

CTN :45169227

28 May, 2026 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of different consumable items and spares for overhauling of unit 5 and unit 3 under em iph dept bktpp - thinner -234 for varnish, varnish bectol red, varnish bectol grey, silastic 732 rtv (300gm bottle), jointing sheet,asbestos,2000x1500x3 mm # jointing sheet,non-metallic compressed asbestos fibre to withstand 550 degree c,150 ksc is code 2712/9.8 grade w/1,size-2000?1500? 3 mm, jointing sheet caf style 59 oil gasket,, jointing sheet,asbestos,2000x1500x1 mm # jointing sheet non-metallic compressed asbestos fibre to withstand 550 degree c,150 ksc is code 2712/9.8 grade 0/1 size-2000?1500? 1 mm, paint synthetic enamel black, paint synthetic enamel smoke gray, acetone, locktite,406,401, hardner,hy 840 for eco-ash wa drg.no.: hw5520073007, resin,cy 205 $for wound stator assy part no.01350801003122, paint remover,locktite,sf-790 for generator, diluent c,drg:5670269,item no:134 generator, mcb,4 pole,63a,top hat rail mounted # 240/415v ac, o/l relay 415v ac,38.0a - 50.0a reference: lr1-d63357,tc, hose ?" dia.430 mm length # hose ?" dia.430 mm length with fittings grade ph8 design pr.345 bar,insulation resistance 15 megaohms for jacking of 210 mw bhel g enerator shaft, hose 3/8" dia. 430 mm length # with fittings grade ph8,design pr. 276 bar,insulation resistance 15 megaohms# for jacking of 210 mw bhel generator shaft, o/l relay 415v ac mn-2 ss94141 3-5a,l&t, o/l relay 415v ac mn-2 9-15a,l&t cat no. ss94114, contactor,power,coil:240 vac,2no+2nc,32a # siemens auxiliary contact-2no+2nc,coil voltage: 240vac,50hz,type: 3tf34 00-0au0,siemens, mcb,3p+1n,16a,top hat rail mounted # 415v ac,9ka, valve gate gm nb-25mm #, ht rubber tape, gear box assembly complete # paharpur cooling towers model: 10p for stage-ii cooling tower (type-6kf ), switch,hp & lp combine cut-out,kp-15 for ac plant, overload relay,18.0-25.0a,415v ac # type:lr1d-25-322 tc, power contactor lc1d80, relay,electronic,over current,0.5~80a 3dm2-wrduwz schneider operating voltage - 100 to 240vac/dc 50/60hz, aux. contact- ol (1nc+1no), al (1no), over load current setting range - 0.5 a to 80a, mpcb,o/l 56-8oa,s/c 15ka # type:gv3me80 schneider-electric, contactor,415v ac,32a,coil 240v ac for power contactor tc, relay, o/l, 415vac, 0.63-1.0a 3ua-5000-0j siemens, thermal overload relay lrd-32 23-32a lad7b106, mcb,3pole,c100, mcb,80a 415vac 3-pole,c-curve,10ka, varnish elmoluft, strainer,screen oil,compressor js 83 af $for ac plant for compressor model: js 83 af,make-blue star, o/l relay 415v ac lr1d-32-355 28-40a,tc

corporations/Associations/Others

CTN :45246695

02 Jun, 2026 NA

Panaji - Goa

Tender For ghrssidc/e-t/2026-27/646 - electrical fabrication - a, la cross arm clamp for 7.5 mt rcc pole (gal v) - cee/e/523, sa cross arm clamp for 7.5 mt rcc pole (gal v) - gec/e/523, la cross arm clamp for 9 mt rcc pole (gal v) - gec/e/524, sa cross arm clamp for 9 mt rcc pole (gal v) - gec/e/524, la cross arm clamp for 105 lbs/yd rail pole (gal) - gec/e/723, sa cross arm clamp for 105 lbs/yd rail pole (gal) - gec/e/723, la cross arm clamp for 60 lbs/yd rail pole (gal) - cee/e/486, sa cross arm clamp for 60 lbs/yd rail pole (gal) - cee/e/486, la cross arm clamp for 90 lbs/yd rail pole (gal) - cee/e/515, sa cross arm clamp for 90 lbs/yd rail pole (gal) - cee/e/515, la stay clamp for 60 lbs/yd rail pole (gal) - cee/e/469, sa stay clamp for 60 lbs/yd rail pole (gal) - cee e 469, la stay clamp for 90 lbs/yd rail pole (gal) - cee/e/508, sa stay clamp for 90 lbs/yd rail pole (gal) - cee/e/508, la stay clamp for 7.5 mtrs rcc pole galvanised - cee e 523, sa stay clamp for 7.5 mtrs rcc pole galvanised - cee e 523, la stay clamp for 105 lbs/yd rail pole (gal) - cee e 723, sa stay clamp for 105 lbs/yd rail pole (gal) - cee e 723, la stay clamp for 9 mtrs rcc pole (gal v) - cee e 524, sa stay clamp for 9 mtrs rcc pole (gal v) - cee e 524, 11 kv v shaped cross arm (gal v) - cee e 408, 33 kv v shaped cross arm (gal v) - cee e 408, b type modified distribution box - cee e 386, a type street light meter box with clamps - cee e 386, stay set for 11 kv lt line - cee e 500, stay set for 33 kv line - cee e 500, turn buckle& eye bolt for 33 kv line - cee e 513, turn buckle& eye bolt for 11 kv line -cee e 466, cast iron packing piece 90 lb for rail pole - cee e 514, top insulators fitting for rcc pole - cee e 506, 4 pin angle type cross arm - cee e 702, 4 pin channel type cross arm - cee e703, 2 pin angle type cross arm - cee e704, 2 pin channel type cross arm - cee e 705, earthing pipe - cee e 467, sa cross arm clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, la cross arm clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, sa stay clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, la stay clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, sa bottom clamps for fixing street light fixtures for 7.5/9mtrs rcc pole galvanised 25 mm pipe - cee e 12, sa top bottom clamps for fixing street light fixtures for 7.5 mts rcc pole galvanised 25 mm pipe - cee e 12, la top clamps for fixing street light fixtures for 7.5/9 mts rcc pole (gal v) 40 mm pipe - cee e 612a, sa top clamps for fixing street light fixtures for 7.5 rcc pole - cee e 612a, gi nut and bolts in various sizes electro galvanised, gi pins for lt pin insulator, gi pins for 11kv pin insulator, gi pins for 33kv pin insulator, gi bent pipe of nominal base 25 mm, 1 mts long for tube light fixture - cee/e 618, gi bent pipe of nominal base 25 mm, 1.5 mts long for hpsv lamps - cee/e 593a, b type modified distribution box with mccb and kit kat fuses as per cees specifications / drawings, metal parts for shackle insulators as per cees specifications, gi bent pipe of nominal base bar 40mm x 3 mts long (medium class) the pipe shaft should conform to is : 1239 (part i) 1973 as amended upto date - ee/ii/21/2009, hot dip galvanised earthing strips of size 30x160x5mm, hot dip galvanised earthing strips of size 100 x 360 x 3mm, g.i bent pipe nominal bore 40 mm ce/e xi for hpsv lamps - cee/e 593a, metal parts for disc insulator as per department 4 bolted. as per department specification & drawing - 60/4/va/cee/tech/2019-20/1282, metal parts for disc insulator 3 bolted - 60/4/va/cee/tech/2019-20/1282, kit kat fuse 100 amps, kit kat fuse 200 amps, kit kat fuses 300 amps, kit kat fuse 400 amps, tinned copper fuse wire of various sizes, aluminium crimping lugs 25 sq.mm, aluminium crimping lugs 35 sq.mm, aluminium crimping lugs 50 sq.mm, aluminium crimping lugs 70 sq.mm, aluminium crimping lugs 95 sq.mm, aluminiu

CTN :45279655

01 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For supply of excavation soft and loose soil not exceeding 1 point 5 metre deep and wide , returning filling in soilsspreading leveling watering and well ramming , removal of surplus soils not exceeding 50 mtr distance , m and l for sand filling with clean dry fine sand unwashed , s and l un reinforced pre cast with peak concrete cable protection , sitc cable heat shrink jointing kit of 11 kv grade 95 sq mm , sitc cable jointing kit of 11 kv heat shrink type 95 sq mm , s and fixing on ht pole danger notice plate for ht 11kv , sitc end joint for 1100 volt xlpe cable of size 95 to 120 sqmm , sitc heat shrinkable end joint for 1100 volt size150 to 240 sqmm , sitc heat shrinkable end joint for 1100 volt xlpe cable of size 300 to 400 sqmm , tubes light grade galvanised of size 80 mm , m and l for earthing complete with gi steel earth plate 600mm x 600mm x 6mm , m and l earthing complete with copper earth plate of size 600x600x3 point 15 mm , supply and fixing in repair lightning arrester single pole 11 kv 65 kilo amp , sitc of 11kv sf6 gas 4way rmu 630 amps , sitc of 11kv 630a switch sf6 disconnector outdoor panel , supply and installation and testing 11 kv outdoor type god , sitc of 200 kva level 03 transformer 11kv on ht and 433 volts on lt side , sitc of 160 kva level 03 transformer 11kv on ht and 433 volts on lt side , sitc of 100 kva level 03 transformer 11kv on ht and 433 volts on lt side , taking out of transformers 50 kva to 200 kva depositin in mes yeard , taking out old unsv ht ug cable of any size , dismantling air break gang operated switches , xlpe cable, working voltage from 3.3 kv up to and including 33 kv (v2) isi marked to is 7098 (part 2) (q2)

Transmission Pole Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

State Government

State Government

corporations/Associations/Others