Latest transmission system Tenders | Government transmission system Tenders

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

Central Government/Public Sector

CTN :45733953

21 Jul, 2026 41.95 Lacs

Jammu - Jammu And Kashmir

Tender For special repair of lt oh line to ug cable, provn of 100 kva servo voltage stabilizer and provn of solar street light and allied infra at rakhmuthi mil stn under ge south akhnoor.

State Government

CTN :45725648

23 Jul, 2026 2.39 Crore

Jodhpur - Rajasthan

Tender For improvement of transmission system from baori headworks to ramdham chowki village birai

State Government

CTN :45726118

23 Jul, 2026 2.39 Crore

Jodhpur - Rajasthan

Tender For improvement of transmission system from baori headworks to ramdham chowki village birai

Central Government/Public Sector

CTN :45509046

06 Jul, 2026 45.00 Lacs

Mathura - Uttar Pradesh

Tender For corrigendum : repair/maintenance and improvement of lt oh line/lt ug cable, lt panel,bus bar panel,lt switch gear including other allied works at mathura cantt under ge (east) mathura

CTN :45704583

17 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of end cap right sterile tripple layered pack titanium by tan dia 9mm 12mm x length 340 440 , lcp for proximal lateral tibia 3 point 5mm with 6 to 10 combiholes for diaphysis with atleast 4 rafting screw options with 9 x 3 point 5mm locking head 2 x 3 point 5mm , cannulated expert tibial nails for fractures of proximal by distal third tibia with 6 locking bolts dia 8 by 9 by 10 mm point length 280 to 400mm 1ar , cannulated expert tibial nails for fractures of proximal by distal third tibia with 6 locking bolts dia 10 to 11 mm point length 280 to 400mm 15 by 20 mm , 3 point 5mm lateral distal fibula anatomical plate size 5 by 6 by 7 by 8 by 9 by 10 by 11 hole rt by lt hle tit , calcaneal locking plate 3 point 5 len point 69mmcompatible 3 point 5 mm locking screws 05 and 05 cortical screws right ti by tan , calcaneal locking plate 3 point 5 len point 69mm left compatible 3 point 5 mm locking screws 05 and 05 cortical screws ti by tan , ao type universal extranal fixator set with 2 tube to tube clamp with 6 universal clamp single pin 2 univeral clampdouble , schanz screws 2 point 5mm length 150mm 16mm threaded , 4 point 5 mm cortical screw self tapping hexagonal head recess len point 16 to 60mm in increments of 2mm ti by tan , 3 point 5 mm cortical screw self tapping hexagonal head recess length 16to40 mm in increment of 2 mm titanium by tan , 3 point 5 mm locking head screw self tapping hexagonal head recess length 16 to70 mm in increment of 2 mm titanium by tan , 4 point 5 by 5 mm locking head screw self tapping hexagonal head recess dia point len 26 to 95mm in increments of 5mm ti by tan with compatable screw driver , wire kirschner with drill head ended 25 cm long x 1 point 8 mm dia stainless steel , locking screw 2 point 7mm x 16mm , locking screw 2 point 7mm x 18mm , locking screw 2 point 7mm x 20mm , bone graft substitute cancellous bone blocks equine origine fully enzymatically deantigenated sterile pack , hydroxyapetite granules , synthetic recrystallized hemihydrate calcium sulphate kit to prepare antibiotic impregnated resorbable pellets for delivery of antibiotics locally , triclosan coated braided dyed polyglactin for orthopaedic surgery size no point 1 90cm long thread with taper cut heavy needle usfda approved , triclosan coated braided dyed polyglactin for orthopaedic surgery size no point 2 90cm long thread with taper cut heavy needle usfda approved , fiber wire with needle multi color size 2 sterile , adjustable loop suspension device with button sterile ti , all inside meniscus repair device with depth gauge at the end of cannula and two needles with small peek implants with 2 0 fibrewire looped between two implants , fibre glass cast for closed reduction of fractures 15 cm and 10cm equal numbers , knee arthroscopy drape 90 in x 124in sms fabric with fluid collection pouch with suction port 2 point 5 in conformable circular fenestration tube holders ce certified aami l 4 compliance , single loaded biocomposite suture anchor peek by pldla material preloaded with fibre wire dia 2 point 8 mm by 3 point 0mm by 5mm sterile , all suture anchors of size 1 point 8mm single loaded meant for bankart and labrum repair with suture point anchors should be provided with straight and curved drill , tap in by twist in knotless biocomposite suture anchors with closed eyelet 4 point 5mm for suture first technique for tenodesis by tendon repair point implants should be mri safe and sterile packed , shoulder arthroscopy drape 160 in x 102 in attached fluid collection pouch hook and loop tube and line control instrument pad fabric reinforcement ce certified aami l 4 compliance , u drape with sms fabric and //bid details 2 / 48 dimension 76 in x 120 in 4 in x 40in split tube holders 1 point 5in adhesive tape ce certified aami l 4 compliance , suture disk by tibial base plate sterile ti by tan sterile pack , knee arthroplasty drape set complaint with aami pb70 2012 level 4 standards consisting of four instrument trolley covers

CTN :45693900

10 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply and installation of automobile trainers and equipment at consignee locations. (tender ref no.26008/2026-27) - light motor vehicle driving simulator, injector -multi hole type, pintle type, petrol engine - 2 stroke, motor cycle/ scooter, injector cleaning unit, injector testing set (hand tester), fuel feed pump for diesel, fuel injection pump - diesel - inline, fuel injection pump - dismantling tool kit, fuel injection pump - distributor fuel rotary pump with standard accessories, fuel injection pump - ve pump with standard accessories, cylinder liner- dry & wet liner, cylinder liner - press fit & slide fit, steering assembly - rack and pinion, air brake trainer assembly, alternator assembly - lmv, engine bearing model set, piston model set, front axle assembly, rzeeppa joint with stand for dismantling and assembly, full floating axle and semi floating axle assembly, wiper motor assembly, cut section model - 4 cylinder diesel engine, cut section model - automatic transmission gear box, cut section model - centrifugal clutch assembly, cut section model - diaphragm clutch assembly, cut section model - radiator - cross flow, cut section model - radiator - down flow, cut section model - shock absorbers, cut section model - single plate clutch assembly, cut section model - turbocharger, demonstration board - anti theft device car, automotive safety air bag simulator, car air conditioner trainer, demonstration board - crdi system, demonstration board - electronic ignition system and ignition coil, disk brake trainer, drum brake trainer, working model - power windows, working model - torque converter, denting kit set, engine compression tester (diesel), two post car lift- capacity 4 ton, electric operated, radiator pressure tester, tyre changer machine, tyre air pressure gauge with holding nipple, wheel alignment machince computerized 3d, wheel balancing machine (for wheel balancing of lmv), air conditioning service unit - car, automotive battery charger, automotive battery tester/ analyser, battery terminal cleaner tool, air blow gun, air impact wrench with impact sockets, engineers stethoscope, grease gun - 500 grams, oil can 500 ml, oil filter wrench - upto 500 mm, piston ring compressor - 50 - 100 mm, piston ring expander and remover - 50 - 100 mm, piston ring groove cleaner, belt tensioner gauge, car jet washer with standard accessories, auto electrical work bench, gloves: rubber, gloves: cotton, industrial/ safety shoes, industrial helmet, blow lamp: 0.5 liter, magnifying glass: 75 mm, lifting tackle/ sling: 1 ton, 2 meters, laser distance measuring instrument, demonstration board: electric vehicle cooling system, engine and transmission system for electric vehicle, cut section of electric vehicle motors, hvac trainer, electric vehicle service equipment test adapter kit, battery tester with inbuilt printer, lighting and wiring system for electric vehicle, electric vehicle diagnostic scanner, solar based charging system, electric vehicle tool kit, electrically insulating blanket, clamps for insulating blanket, insulated rubber mats, gloves: electrically insulated, industrial/ safety shoes: electrically insulated, glove inflator kit, goggle: white glass, ac current digital clamp meter, digital continuity tester, soldering iron set: mechanic electric vehicle

CTN :45438320

06 Jul, 2026 45.00 Lacs

Ranga Reddy-T - Telangana

Tender For corrigendum : supply of providing and laying of painting works , patch works , waterproofing works , dismantling false ceiling , dismantling bison board , dismantling woden partistion , window closing , dismantling existing washbasin , cleaning , room 3 , providing toilets , toilet renovation works , roofing and false celing works , room 9 , floor patch works , dismantling of toilets , dismantling damaged windows , room 14 15 , dismantling existing doors , repairs to existing ventilator windows , dismantling existing wall and floor tiles , structural repair and opening modification works , dismantling brick structure and floor repair , dismantling and vegetation removal , dismantling existing broken and damaged glass panes , cpvc water supply line , site clearance and general demolition works , anti termite treatment , rodent and pest control treatment , overhead water tank cleaning repair and disinfection , storm water drain and surface drainage , signage and room identification , comprehensive checking of 1 nos 250 kva outdoor type substations including inspection , aluminium paint , servicing of existing 11 kv 400 amps 3 pole gang operated type air break ab switch , supplying and replacing damaged or worn out copper metal , supplying and replacing damaged or defective 11 kv post top insulators , supplying and replacing damaged or defective 11 kv pin type insulators , servicing of earth pits , supply installation testing and commissioning lbs , xlpe insulated aluminium conductor armoured ht cable , providing indoor or outdoor type heat shrinkable , supplying and laying of 3.5 core x 240 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , supplying and making end termination for 3.5 core x 240 sq.mm 1.1 kv grade , joint for existing single run lt power cable of size 3.5 core x 240 sq.mm , comprehensive servicing and preventive maintenance of existing ht transformer , supply, fixing, installation, testing and commissioning of lightning arrester , providing and fixing cable identification tags , supply, installation, testing and commissioning sitc main mv panel , supply, installation, testing and commissioning sitc cubicle pdb panel , supply, installation, testing and commissioning sitc feeder pillar box , providing and installation of maintenance free earthing station , supplying and laying of 3.5 core x 120 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , providing laying and fixing of overhead perforated or slotted ms cable tray , supply installation testing and commissioning 7 segment distribution board , providing fabricating supplying, installing testing and commissioning of electrical socket box

Central Government/Public Sector

CTN :45365869

07 Jul, 2026 38.50 Lacs

Dibrugarh - Assam

Tender For corrigendum : special repair to lt ug cable and associated works at otm accn at af stn dinjan and upgradation of existing old pipe line into ppr pipe line and connected items at officer colony of asc bn under ge (af) mohanbari

Private Sector

CTN :45670639

29 Jun, 2026 NA

Delhi - Delhi

Tender For transmission system for evacuation of power from rajasthan rez ph-iv (part-5: 6 gw) [barmer complex] barmer-ii: 6 gw (solar) (lcc configuration)

Transmission System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Private Sector