Latest tube shield Tenders | Government tube shield Tenders

State Government

CTN :45700034

05 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For procurement of various boiler tube shields for unit 5 (500 mw) boiler at bhusawal tps, required during coh.

CTN :45720888

16 Jul, 2026 26.54 Lacs

Multi City - Rajasthan

Tender For supply of tube shielding and bottom seal plates installed at 2x660 mw ssctps, rvun, suratgarh

CTN :45717530

16 Jul, 2026 26.54 Lacs

Ganganagar - Rajasthan

Tender For supply of tube shielding and bottom seal plates installed at 2x660 mwssctps, rvun, suratgarh

CTN :45473607

30 Jun, 2026 NA

Rourkela - Odisha

Tender For supply of set of end shield de and nde side suitable for cgl make motor of mcp used in wag9/wap7 locomotives. a set consists of 02 items in 06 nos. as follows :- (1) driving side end shield assembly along with inner and outer grease cover, (2) non-driving side end shield assembly along with inner and outer grease cover.(set details as per annexure enclosed). [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45435944

18 Jun, 2026 39.54 Lacs

Bardhaman - West Bengal

Tender For supply of tube shield and other boiler spares for bacm dstps dvc - half round tube shield for eco tube , half round tube shield for ltsh tube , half round tube shield for bp screen tube , half round tube shield for ww screen tube , tube shield as per drawing attached r 32 mm , tube shield as per drawing attached r 27.5 mm , l plate for eco coil upper cassette baffle , l plate for eco coil lower , cassette baffle top plate for ltsh coil , cassette baffle top plate for eco coil , cassette baffle ltsh coil upper , cassette baffle ltsh coil lower , cassette baffle economiser coil lower , cassette baffle economiser coil upper , ss rod dia 10mm * /bid number : gem/2026/b/7619032 + /dated: 04-06-2026 ' ' / bid document 1 / 23

CTN :45408006

15 Jun, 2026 NA

Allahabad - Uttar Pradesh

Tender For tender for supply of shields for the purpose of overhauling and general maintenance in boilers of munpl meja 100001814 : - p.shield-ss304-180 ax 51mm x 3mm , clamp for protection shield , profile shield-superheater , eco 90deg bend shield r60 , profile shiled eco-02 , p. shield-ss304-180a x 42.2mm x 3mm , p. shield-ss304-180a x 44.5mm x 3mm , half tube shield-id 48.3x3mm thk-l 1000m , p. shield-ss310-180a x 38mm x 3mm , p. shield-ss310-180a x 63.5mm x 3mm

Central Government/Public Sector

CTN :45394111

09 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of end shield (non-driving end) to presstech part no. sig 44003 for presstech make 4.5 kw alternator as per rdso specification no. rdso/pe/spec/tl/0054-2003 (rev.0) with amendment no. 1 & 2. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45372281

18 Jun, 2026 NA

Multi City - Multi State

Tender For supply of set of end shield de and nde side suitable for bbl make 15kw/20hp motor of mcp used in wag9 / wap7 locomotives. a set consists of 02 items in two nos. (1) driving side end shield assembly along with inner and outer grease cover (2) non-driving side end shield assembly along with inner and outer grease cover . material to be procured from clw approved vendors or their authorised dealers only. ]

Central Government/Public Sector

CTN :44538303

27 May, 2026 NA

Barh - Bihar

Tender For bid to ras corrigendum : supply of 00010 m4837900217 shield, prot: strt, ss304, 180deg, 44.5mm , 00020 m4837900218 shield, prot: strt, ss304, 180deg, 63.5mm , 00030 m4719046013 half tube shield, 38.1x3x1000mm , 00040 m4837900221 shield, prot: strt, ss304, 180deg, 57.2mm

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

Tube Shield Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government