Latest turbine pump Tenders | Government turbine pump Tenders

State Government

CTN :45581757

24 Jun, 2026 9.70 Lacs

Kumarghat - Tripura

Tender For rewinding and repairing of submersible pump motor set, horizontal pump motor set, within jurisdiction of dakshin unakoti vc to ujandudpur gp within the jurisdiction of dws sub-division kumarghat 2026-27

corporations/Associations/Others

CTN :45567904

22 Jun, 2026 11.33 Lacs

Chandigarh - Chandigarh

Tender For emergent fabrication, providing and fixing of complete spare rotating assembly for 603 hp horizontal split casing pump along with repair of existing defective 603 hp motorized pump set at huda pump house water works sector-39, chd under sde mcph1 chd

Central Government/Public Sector

CTN :45376467

29 Jun, 2026 30.00 Lacs

Bikaner - Rajasthan

Tender For corrigendum : repair and comprehensive maintenance of swimming pool plant and equipments fire fighting system at af stn nal under ge (af) nal - comprehensive annual maintenance of swimming pool comprises of the following equipments complete all as specified and directed.(a) pumping sets of capacity 3.5 hp - 05 nos (01 as standby) (b) pressure filter of filtering capacity 50 cum/hr - 04 nos (01 as standby)(c) dosing pump - 02 nos (one for chlorination and one for soda ash)(d) electrical panel board consisting of starters of suitable rating complete.note: rate quoted by the contractor shall deemed to be included for the following :-(i) contractor shall provide trained technician and a helper, who will visit swimming pool once in a week, to check and servicing of the equipments above to ensure the serviceability and proper functioning of swimming pool.(ii) grease and lubricating oil shall be provided by the contractor at his own end and nothing extra shall be payable on this account. (iii) cleaning all swimming pool building inside, plant room, equipments including surrounding area of the buildings. (iv) check serviceability of all self priming recirculation pump of single stage / horizontal self priming pump set of 3.5hp / 3.26 kw capacity and all other connected items., comprehensive annual maintenance of fire fighting system in sekhon hall , new tech flight, sre and new atc of the following equipments complete all as specified and directed.(a) main fire pump with centrifugal motor of existing capacity- 04 nos (b) jockey fire pump with electric motor of existing capacity - 04 nos (c) makeup fire pump- 04 nos(d) dg fire pump with engine - 04 nos note: rate quoted by the contractor shall deemed to be included for the following :-(i) contractor shall provide trained technician and a helper, who will visit fire fighting installation in sekhon hall , new tech flight and new atc once in a week, to check and servicing of the equipments above to ensure the serviceability and proper functioning of installation.(ii) grease and lubricating oil shall be provided by the contractor at his own end and nothing extra shall be payable on this account.(iii) cleaning all fire fighting installation buildings (sekhon hall , new tech flight and new atc) inside, plant room,equipments including surrounding area of the building. (iv) check serviceability of all self priming recirculation pump of single stage / horizontal self priming pump set of all existing capacity and all other connected items., s&f in repair pressure pump limit switch of capacity 1psi to 4 psi and 230 volt as per existing make and model fixed on pressure booster line complete all as specified and directed., supply, installation, testing and commissioning in repair of detectors complying with and type certified to en-45 addressable type multi sensor detector with heat and smoke combination with base with self built intelligence as per is:11360 (for annexes) complete all as specified and directed., supply, installation, testing and commissioning in repair of addressable manual call point / pill station resettable type with base complete all as specified and directed, supply, installation, testing and commissioning in repair of fire alarm sounder/siren electronic type horizontal single stage continuous type normal operation for atleast 50 minutes with sound level 65 db to 120 db measured at 1.5 mtr with sound output variation +5 db 500 mtr complete all as specified and directed, supply and fixing in repair addressable monitor module for activating the sirens complete all as specified and directed, taking out old unserviceable hose box by cutting and welding and s&f hose box made of 18 gauge ms sheet 800mmx 600 mm x 250 mm with double door with 4 mm thick glasses and door frame made of 16 gauge ms sheet for keeping 2 nos hose pipe of length 15 mtr each branch pipe nozzle coupling etc and painted fire red out side and brilliant white inside yard complete all as specified and dire

Central Government/Public Sector

CTN :45354608

02 Jul, 2026 4.36 Crore

Angul - Odisha

Tender For corrigendum : supply of horizontal centrifugal pump sets 38 lps x 160 mtrs head with flp 550 volts electricals & accessories , vertical turbine pump set, 350 lps x 65 mtr head with 6.6 kv electricals & accessories , vertical turbine pump set, discharge: 270 lps, head: 62 mtrs, electricals: 6.6 kv electricals & acc , horizontal centrifugal pump sets 180 lps x 170 mtr head with 3.3kv electricals & accessories , horizontal centrifugal pump sets, 100 lps and 180 mtrs head with 3.3kv electricals and accessories , horizontal centrifugal pump set 75 lps x 80 mtrs. head with 415 volts electrical & accessories , horizontal centrifugal bare pump 160 lps x180 mtrs head & accessories without prime movers & starter , horizontal centrifugal pump set, 180lps x 200mtr head, 6.6kv electricals and accessories

Central Government And Public Sector

CTN :45346653

24 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of pulverizer cyclone type 20 hp with attached 48 inches vibrio shifter , vibrio shifter 36 inches , end runner granite 21 inches dia with vfd , end runner granite 21 inches dia non vfd , edge runner with vfd 50 liters capacity , edge runner ss 316 non non vfd 50 l capacity , tablet compression machine rotatory 20 station d tooling , tablet compression machine rotatory 10 station b tooling , ribbon blender 500 liters , tray dryer 96 trays , tray dryer 24 trays , stick making machine , pills cutting machine , ss movable liquid storage non jacketed tank 200 liters , portable dehumidifier , transfer pump , zero hold up filter press 14 inch x 10 inch , single head filling machine semi automatic , ointment filling machine semi automatic single head pneumatic , bottle unscrambler turn table , four head servo-gear pump based liquid filling machine , automatic 4 head screw cap sealing machine , servo plc base automatic vertical sticker labelling machine , packing conveyor belt , manual capsule filling machine 300 holes , amla pulper machine , wood cutter machine , raw material grading machine , heavy duty mixer grinder , juicer machine , standard tablet coating machine , vertical electrical muffle furnace kupi pakwa machine , horizontal electrical muffled furnace , electric bhatti burner medium size , electric bhatti burner large size , ss pan kadhai 50 liters , ss pan kadhai 100 liters , ss pan kadhai 200 liters ) /bid number : gem/2026/b/7567561 * /dated: 27-05-2026 & & / bid document 1 / 42

CTN :45408207

18 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras bid to ras supply of amn bkr inf 30 mt 2615 - 0.50 mm thick an colour having a tensile strength 550 mpa of size 10 feet x3 feet make uniix jindal mectec or eqv brand , ppgi ridge sheet of 0.80mm thick of 90cm wide of make sail tata jindal incl treating galvanised surface , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos per pkt , hdpe sand bags og colour of size 0.75x0.375x0.15 , door size 3.0x2.10m double leaf ms sheet for door 2mm thick frame as specified , door size 1.80x2.10m double leaf ms sheet for door 2mm thick frame chowkat made of steel equal angle iron 55x55x6mm isi grade , ventilator with grill of size 600x400 mm ventilator loop hole frame for steel angle of size 35x35x5mm isigrade , gate size 3.0 mx 2.0m double leaf frame made of anlgeiron 75x 75x6mm isi grade with shutters made of reinforemnt tmt bar 12 mm dia flat iron for stiles , anti corrosive red oxide zinc chromate primer conforming to is 5-2004 make berger nerolac asian or equivalent , white lime , waterproofing compound make pidilite dr fixit fevicol or equivalent , cement based paint snowcem of make berger nerolac asian or equivalent , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 make birla gold ambuja ultratech acc jk dalmia or equivalent , brick sub class b , three phase 1.2 hp monoblock pump 430 volt complete with and incl 3 mtr length required size flexible suction pipe , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3.0 mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame. , nut bolt 6mm dia 30 mtr dia with check nut and washer , gi pipe 40mm dia mtr 2.5 mtr make jindal tata kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto polycab finolex , wall vertical non woven geotextile 500gsm as separation layer between wall pvc membrane with provision of pvc disk anchor faster , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive , floor horizontal non woven geotextile 500gsm as separation layer between foundation and pvc membrane , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc-p water proofing membrane , non woven geotextile 500gsm as protective layer of pvc for pvc membrane , deck slab horizontal non woven geotextile 500gsm as seperation layer between deck slab and pvc membrance , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive for non woven geotextile 50gsm , high quality adhesive for termination of pvc water proofing membrane at doors ventilators , cement opc 43 grade packed in hdpe bag each 50 kg wt for retaining wall 40.00 mtr x 3.00 mtr height 8 mtr x 3 mtr x 5 nos 40 mtr , coarse sand free from vegetation confirming to is 650 1991 , coarse aggregate 40mm graded confirming to is 383 2016 , stone boulder 9 inch to 12 inch , pvc pipe 75mm dia 3 mtr long //bid details 2 / 47

CTN :45572401

09 Jul, 2026 NA

Tiruvannamalai - Tamil Nadu

Tender For old set evaporate condensate pump rc no 7019/ps/bac/2026 - old set evaporate condensate pump, old set evaporator condensate pump model : cd 80-50-320 size : 80 x 50 mm discharge : 50 m /hr head : 20 m hp : 10 rpm : 1440 moc : casing cast iron,impeller :ss 304 shaft : ss410 sleeve : ss410 h & g bare pump , syrup pump model : cd 100-65-320 size : 100 x 65 mm discharge : 50 m /hr; head :30mtr hp : 20 rpm : 1440 moc : casing ss 304,impeller :ss 304 (closed type) shaft : ss410 sleeve : ss410 h & g , mud pump model : 80 bc-320 size : 100 x 80 mm discharge : 30 m /hr head : 20 m hp/rpm : 25/1440 moc : body ss 304,impeller :ss 304 (closed type) shaft : ss410 sleeve : ss410 h & g , lime pump type : horizontal end section(semi open impeller) model : cd 65-40-320 size : 65 x 40 mm motor recommended :3.7 kw/1450 rpm liquid handled : milk of lime shaft sealing : gland packed mol temperature : 70 degree centigrade mol density :1.162 kg/m3 discharge : 4.5 m /hr head : 25 m hp/rpm : 25/1440 moc : casing ss 304,impeller :ss 304 shaft c45 sleeve : ss410 h & g

CTN :45569929

20 Jun, 2026 NA

Dahej - Gujarat

Tender For design, engineering, supply, installation, testing and commissioning of "non clog end suction type horizontal centrifugal pump set for effluent" with accessories and allied electro-mechanical and instrumentation and scada work at dahej pcpir pumping station at dahej - ii. (suva village).

CTN :45482035

18 Jun, 2026 19.50 Lacs

Rohtak - Haryana

Tender For corrigendum : supply of various parts of horizontal pumps and tools... - ms flat 50*5 mm, ms angle 50*50*5mm, 50*50*6mm (tata,sail,jindal make), ms channel ismc 100 (tata,sail,jindal make), ss round bar 30 mm(line shaft), ss round bar 40 mm(line shaft), plastic rope 3/4", nut & bolt 5/8"x 3", m.s nut & bolt 5/8" x 21/2", ms nut bolt 5/16x 1.5", ms nut bolt 1/2" x 2", ms nut bolt 1/2" x 11/2", ms nut & bolt 1/2" x 21/2", ms nut & bolt 1/2" x 3", ss nut bolt 3/4x3, stud with nut 11/16 x 5/8 x 3", stud with nut 5/8x 5/8 x 3", gi wire 8 swg, gland packing 3/8", gland packing 1/2", lift belt 5ton cap x 4 mtr, lift belt 3ton cap x 3 mtr, lift belt 3ton cap x 2 mtr, gland plate for n.w-12d, gm gland plate for 5 c/s v.t pump as per sample, g.m gland plate for 10 c/s v.t pump as per sample, pipe wrench 12"(300mm size) (taparia/pye/miranda/spartan/stanley make ), hammer 1lbs, screw driver 10" 250mm (taparia/pye/miranda/spartan/stanley make ), screw driver 12" (taparia/pye/miranda/spartan/stanley make ), screw driver 8" (taparia/pye/miranda/spartan/stanley make ), ring spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), insulated plier 8" (200mm) (taparia/pye/miranda/spartan/stanley make ), long nose plier 8" (taparia/pye/miranda/spartan/stanley make ), d-e spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), d-e spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 14x15mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 12x13mm (taparia/pye/miranda/spartan/stanley make ), ring spanner 14x15 (taparia/pye/miranda/spartan/stanley make ), ring spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), ring spanner-12x13 (taparia/pye/miranda/spartan/stanley make ), line tester (7"- 8") (taparia/pye/miranda/spartan/stanley make ), freemans 5mx19mm measuring tape with belt clip and lock, hexa blade one side/double side mix, welding holder heavy duty, hdpe tirplaine 15 x12 heavy duty, coupling tyre tc 13, delivery casing for nw-12d inner for kirlosker pump, delivery casing for nw-12d outer for kirlosker pump, impeller 6x6 nw-12d kirloskar pump, bearing pedestal for nw-12d kirlosker make, shaft for nw-12 d pump kirlosker make, lantern ring for nw-12 d pump kirlosker make, water deflector for nw-12 d pump kirlosker make, abrasive cutting wheel 14 (grindwell norton, 3m, bosch make), motor shaft with check nut 5 c/s v.t pump as per sample, impeller nut mf for 5 cs horizontal pump as per sample, fuel pump gear tv-2 kirlosker make, servo super oil mg 20w-40, log book of vehicle (25 page) as per sample, mas register (50 page) as per sample, log book of machinery (25 page) as per sample, cyl liner with joint ring 1800801 kirlosker make, valve kit tv-2 kirlosker make, liner piston chota jawan kirlosker make, head gasket 87.5 mm 1180090300 kirlosker make, air cleaner kirlosker make, packing kit tv-2 kirlosker make, pipe t type kirlosker make, fuel tank complete kirlosker make, fuel filter assy kirlosker make, nozzale chota jawan kirlosker make, air cleaner chota jawan kirlosker make, packing kit chota jawan kirlosker make, valve kit chota jawan kirlosker make, head gasket chota jawan kirlosker make, diesel filter chota jawan kirlosker make, banjo bolt tv2 kirlosker make, nozzle 9430034216 kirlosker make, piston assy.180061000-1800615000 kirlosker make, cr bolt tv2 kirlosker make

CTN :45558564

24 Jun, 2026 13.99 Lacs

Jhalrapatan - Rajasthan

Tender For supply of spares for m/s sam turbo-make horizontal centrifugal pump (model- svn 6x12) installed in dense phase dry fly ash handling system and condenser online tube cleaning system (coltcs) of unit 1 and 2 ( 2x600 mw), katpp, rvun, jhalawar.- impeller, casing wear ring, impeller wear ring, disc (impeller), stuffing box bush, shaft with fitting key and shaft screws for nuts, thrower, lockwasher, locknut, hex. screw (disc/shaft), lantern ring, key (impeller/shaft), oil seal set ( 1set =2 nos.), gland packing 1set = 5 nos.), /c. cover) (1 overline set = 5nos .), joint ring (shaft/sleeve), lovejoy disc-o-flex coupling, bearing bracket, bearing cover (de), bearing cover (nde), vent(filter), constant oil leveler, support foot

Turbine Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector