Latest valve sluice Tenders | Government valve sluice Tenders

CTN :45724340

06 Jul, 2026 7.75 Lacs

Multi City - Telangana

Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.

CTN :45253273

01 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For bid to ras supply of copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , ready mix plaster 40 kg bag , gi wiremesh of standard width each roll 15 mtrs , plywood bwr grade 12mm thick 7ft by 3ft , cushion 560by530by100mm of 40 density cool foam covered with zip tapestry cloth , hydraulic door closer , sluice valve 200mm cast iron , gi pipe 50mm , epoxy based zink phosphate primer , cushion for chair dining of size 450by450mm covered with zip tapestry cloth , plywood bwr grade 12mm thick 8ftby4ft , gi pipe 25mm medium gde , ms wire mesh of standard width as per sample , curtain rod 3 mtr length 25mm dia , gi pipe 40mm medium gde , ball cock with rod and ball 20mm float valve , liquid water proofing compound dpc , gi pipe 20mm medium gde , sluice valve 100mm cast iron , ball cock with rod and ball 15mm float valve , sluice valve 150mm cast iron , gi pipe 80mm medium gde , ball cock with rod and ball 25mm float valve , plywood bwr grade 12mm thick 6ftby3ft , butt hinges 100mm aluminium alloy anodise , gi pipe 15mm medium gde , m seal , sluice valve 80mm cast iron , tower bolt 150mm aluminium anodised barrel , oil putty for window glass fitting ) /bid number : gem/2026/b/7481230 * /dated: 19-05-2026 & & / bid document 1 / 40

CTN :45656638

01 Jul, 2026 69.78 Lacs

Thiruvarur - Tamil Nadu

Tender For providing kitchen equipment and its accessories for two mess block of boys hostel and girls hostel in cutn thiruvarur - supplying, installation, testing, and commissioning of 85 kg/hr gas-operated steam boiler for kitchen application including all accessories etc., as required. a) gas-operated steam boiler design: cylindrical multipurpose boiler maximum steam output (@100°c): 80-90 kg/hr outlet steam condition: dry, saturated max. working pressure: 10 kg/cm² max. operating pressure: 3-4 kg/cm² safety valve set pressure: 10 kg/cm² b) mountings & fittings details main steam stop valve - 25 mm nb - 1 no. safety valve - 15 mm nb - 2 nos. shell blow down valve - 25 mm nb - 1 no. air vent valve - 15 mm nb - 1 no. isolation valve along with pressure gauge - 1 no. control bannet valve set c) t-series burner fuel: lpg type: monoblock fuel consumption: 5.8 to 6.5 kg/hr d) m.s. straight chimney, nuts & bolts, template for foundation, foundation bolts, including painted with heat resistant aluminium paint and foundation etc., as required diameter: 150 mm height: 6 m (vertical) + 1 m (horizontal connecting pipe) sheet thickness: 5 mm e) made: boiler outer shell 6 mm ss 304 grade plate (2-layers). inner shelled & kid ring is made out of 2 mm ss 304 grade stainless steel sheet & bottom 3 mm. f) type of boiler: super boiler, dimension: 35" od x 50" ht, water capacity: 750 litres

CTN :45672591

15 Jul, 2026 6.47 Lacs

Bardhaman - West Bengal

Tender For supply of non retrun valve , sluice valve , guide rope bushing , steam valve , feed check valve , gt valve flngd

corporations/Associations/Others

CTN :45689679

16 Jul, 2026 NA

Cuddalore - Tamil Nadu

Tender For tender for supply of gasket and packing rings for hp lp byepass system - spiral gasket (hp steam) 214/190 x 4.5 , graphite packing ring for hp bypass valv , graphite packing ring for hp bypass valv , packing ring (hp water stop) 95/77 x 17. , spiral gasket (lp steam) 331/307 x 4.5 , packing ring (lp stem) 85/60x12.5 mm , packing ring (lp stem) 290/270x24 , packing ring graphite (hp , lp spray valve) , graphite ring (hp steam & lp steam) 60 / 4 , graphite packing ring size 38/22 mm x 8 , graphite ring 40x30x5mm

State Government

CTN :45701433

29 Jun, 2026 NA

Jhajjar - Haryana

Tender For hiring of hydra machine,job work for the repair of sluice valve, sluice valve opening key

State Government

CTN :45676238

03 Jul, 2026 12.42 Lacs

Dharmanagar - Tripura

Tender For uws scheme 2025-26/ sh- providing installation, commissioning of 2 nos. 227 m3/h capacity,76 m head (total) clear water horizontal split casing centrifugal pumpset alongwith all accessories for wtp at dharmanagar 2025-26 - providing fitting fixing of 227 m3/hr capacity. 76 m head (total) clear water horizontal split casing centrifugal pump with bronze impeller, shaft (en 8), ss sleeve bush, flexible pin bush type coupling (kirloskar / wpil/grw / mather platt make) to be used with existing horizontal foot mounted squirel cage induction motor of capacity 100hp, 1500 rpm, horizontal (bch make) including all allied accessories complete in/c installation and commissioning and testing as per specification and direction of the engineer-in-charge(excluding suction /delivery pipe, foot valve. non return valve, sluice valve, electrical panel board and other electrical accessories and civil works)

Co-operative

CTN :45697522

03 Jul, 2026 1.88 Lacs

Kadi - Gujarat

Tender For supply of boiler spares - 3300835, 1.000, valve size :1", 300 class40 kg/sqcm, globe, flanged end, appli. steam, ibr, with ibr tc.used for 2 tph thermax boiler.with ibr certificationused in boiiler mountaing.only make:- sant or theramx stdused in thermax boiler mountings, 3127007, 1.000, globe valve 25mm, 150 class (ibr approved)make : sant or thermaxused in 2 tph thermax boiler vent line.with ibr certificationused in boiiler vent line, 3205024, 1.000, make:- thermax or sant stdvalve: globe,size:- 3, 150 classwith ibr tc.used for 2 tph thermax boiler main steam stop valvewith ibr certificationused in boiiler main steam stop valve, 3144458, 1.000, make:- sant stdvalve:globe, 40mm,40 mm pn 16 200 mm long, ,with ibr tc.used in jaya boiler feed water inlet line., 3200906, 1.000, glove valvesize: - 3, 150 class, 309 mm long.with ibr certificationused in main steam header jaya boiler linerequired main steam header jaya boiler line., 3083747, 1.000, servo motor for arg63 unitgsm 60used in boiiler at dvsd kadi plant, 3932017, 1.000, required oil gun for jaya boiler at dvsd kadi plantoil gun with spare sealtype :- ortly typepa 1028 1219, 3051643, 1.000

State Government

CTN :44966682

08 Jul, 2026 NA

Yamunanagar - Haryana

Tender For corrigendum : in situ repair of main steam stop valve and superheater spray gate valve in 300mw unit i dcrtpp hpgcl yamuna nagar during annual overhauling in nov 2026

Central Government/Public Sector

CTN :45543733

29 Jun, 2026 NA

Katipala - Karnataka

Tender For corrigendum : supply of spares for bhel make steam turbines & compressors - gt38006-stop valve, tar ptfe abstriefe pos47-hy101941020030502076 6738006-stop valve, turcon step seal pos 52-hy101941020030502081 gt38006-stop valve, toroidal slg rings oil resisto pos 53-hy101941020030502082 gt38006-stop valve, toroidal slg rings oil resists pos 54-hy101941020030502083 6t38306-stop valve, toroidal slg rings oil resisto pos 59-hy101941020030500089 6738006-valve spindle disc spring assly po 521, valve spindle hy101941020030541056 gt38006- valve spindle disc spring assly po 521, ring pos 21/2 hy101941020030541058 6738006-valve spindle packing pos 29, sealing ring closed hy101941020030541076 gt38006- valve spindle packing pos 29, sealing ring open pos 29/7 hy101941020030541081 6738006- extraction gov valve assy s pares, sealing ring open hy101941020030527030 gt38006- extraction 1& gov valve assy 5 pares, bush pos 14/5 hy101941020030527092 gt38006-hp pilot valve spares toroidal slug rings pos 26 hy101941020030603045 6738006-hp pilot valve spares toroidal slg rings pos 35 hy101941020030603059 gt38006-hp pilot valve spares, turcon step seal pos 39-hy101941000030603064 gt38006 ring trol selg static 10130 thk 5 101941020030609031, spr. cat. drg.no. c03060700004, pes no 1 gt38006 ring trol selg static 1026 thk 3101941020030609044, spr. cat. dry. no, c03060700004, fo no 26 gt38006 turcon step seal 10 mm 101941020030609063, spr. cat. drg no, c03060700004, pas no 39 gt38006/7 sealing ring closed 25/38x6.5,pos. no- 14/4, part no 101941020030542029 gt38006/7 sealing ring open 25/38x6.5 p05. no-14/3, part no 101941020030542028 gt38006/7 pacing ring a24x29,pos. no-24, part no 101941000030502039 6138006/7 threaded bush, pos no 21, part no-101941020030527048 gt38006/7 washer sealing 1702281.5,pos no-42, part no 101941020030527103 gt38006/7 packing 40x248x4.8 pos no-28, part no 101941000030502044 6138006/7 packing pos no-29 part no-101941020030502045 gt38006/7 solid taper pin dia 8xl-28, pos. no-57, part no 101941020030527118 gt38006/7 fork m3sx 1.5 pos. no 30, part no-101941020030541085 gt38006/7 pin 16f7x152, pos. no-27, part no-101941020030603047 gat38825-yoke assembly, taper pin pos 16/17-16/21-hy101880570030541047 gat38025-yoke assembly, valve spindle pos 15 hy101980570030541057 gat38025-stop valve s bush pos 7 hy101980570030552014 gat38025-stop valve s, ring trol selg static pos 19-hy101980570030552034

Valve Sluice Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

Co-operative

State Government

Central Government/Public Sector