Get complete information related to latest Valve Sluice Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Valve Sluice Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Valve Sluice Tenders.
Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluicevalves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.
Tender For bid to ras supply of copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , ready mix plaster 40 kg bag , gi wiremesh of standard width each roll 15 mtrs , plywood bwr grade 12mm thick 7ft by 3ft , cushion 560by530by100mm of 40 density cool foam covered with zip tapestry cloth , hydraulic door closer , sluicevalve 200mm cast iron , gi pipe 50mm , epoxy based zink phosphate primer , cushion for chair dining of size 450by450mm covered with zip tapestry cloth , plywood bwr grade 12mm thick 8ftby4ft , gi pipe 25mm medium gde , ms wire mesh of standard width as per sample , curtain rod 3 mtr length 25mm dia , gi pipe 40mm medium gde , ball cock with rod and ball 20mm float valve , liquid water proofing compound dpc , gi pipe 20mm medium gde , sluicevalve 100mm cast iron , ball cock with rod and ball 15mm float valve , sluicevalve 150mm cast iron , gi pipe 80mm medium gde , ball cock with rod and ball 25mm float valve , plywood bwr grade 12mm thick 6ftby3ft , butt hinges 100mm aluminium alloy anodise , gi pipe 15mm medium gde , m seal , sluicevalve 80mm cast iron , tower bolt 150mm aluminium anodised barrel , oil putty for window glass fitting ) /bid number : gem/2026/b/7481230 * /dated: 19-05-2026 & & / bid document 1 / 40
Tender For uws scheme 2025-26/ sh- providing installation, commissioning of 2 nos. 227 m3/h capacity,76 m head (total) clear water horizontal split casing centrifugal pumpset alongwith all accessories for wtp at dharmanagar 2025-26 - providing fitting fixing of 227 m3/hr capacity. 76 m head (total) clear water horizontal split casing centrifugal pump with bronze impeller, shaft (en 8), ss sleeve bush, flexible pin bush type coupling (kirloskar / wpil/grw / mather platt make) to be used with existing horizontal foot mounted squirel cage induction motor of capacity 100hp, 1500 rpm, horizontal (bch make) including all allied accessories complete in/c installation and commissioning and testing as per specification and direction of the engineer-in-charge(excluding suction /delivery pipe, foot valve. non return valve, sluicevalve, electrical panel board and other electrical accessories and civil works)
Tender For auction sale of others - 1 v-belt a-40 06 nos. 2 v-belt a-42 02 nos. 3 v-belt a-49 18 nos. 4 v-belt a-59 02 nos. 5 rocker shaft with core plug 06 nos 6 copper joint 0.8 mm 11 nos 7 gasket for cummins make 08 nos 8 spring for valve kirloskar ra6 12 nos 9 bushing camshaft -2-7 03 nos 10 gasket wir out let cummins make 02 nos 11 banjo bolt 09 nos 12 banjo bolt for gear casing 04 nos 13 spacer 06 nos 14 retain fuel conn . gasket 40 nos 15 cut out 04 nos 16 gasket injfuel conn 28 nos 17 gasket 04 nos 18 screen oil pan 05 nos 19 lock 30 nos 20 cyl head gasket set 04 nos 21 hose 06 nos 22 hose 34 nos 23 hour meter 01 nos 24 piston complete rc-3 10 nos 25 ring 56 nos 26 connecting rod assembly 08 nos 27 cup for valve rn ¿ 6 06 nos 28 washer 03 nos 29 cylinder liner 06 nos 30 fuel pump coupler 01 nos 31 ball bearing double row 04 nos 32 dowel for connecting rod ra 6 12 nos 33 bushing 06 nos 34 liner ¿o¿ ring 02 nos 35 nut 78 nos 36 hose 03 nos 37 retainer coler & ring 12 nos 38 copper joint 0.5 mm 07 nos 39 guide valve stem 23 nos 40 rubber bush top size 08 nos 41 carbon bush m145 e 09 nos 42 rubber bush small size rc 8 06 nos 43 thermostat seal for kcl 08 nos 44 push rod 08 nos 45 copper joint 1.0mm 11 nos 46 stud for cy.head/short 12 nos 47 big end bearing 24 nos 48 stud for cyl head [long] ra-6 12 nos 49 joint for l.0 sump ra ¿ 6 02 nos 50 fuel injection pipe 01 nos 51 fuel filter element kcl 31 nos 52 relief valve 04 nos 53 starter [ c12 volts] 02 nos 54 starter with steel 01 nos 55 supply manifold assembly 02 nos 56 lock washer ra-6 12 nos 57 collects v[pair] for valve ra-6 12 nos 58 bush rubber bottom 06 nos 59 lock washer ra-6 12 nos 60 main bearing 0.20 u/s ra-6 14 nos 61 spring ra-6 12 nos 62 oil seal n.t.fwe ra-6 02 nos 63 joint for ra-6 10 nos 64 push rod tube 08 nos 65 joint for support ra-6 02 nos 66 l.o.pump complete ra-4/ra-6 01 nos 67 push rod ra-6 12 nos 68 core plug 04 nos 69 v.r lever with bush 12 nos 70 cap for rubber bush 08 nos 71 many fold fuel drain 02 nos 72 joint for pump 04 nos 73 fuel pipe pump to filter 03 nos 74 complete set of joints 02 nos 75 injector complete 06 nos 76 connecting rod 06 nos 77 cy lender liner 01 nos 78 piston ring oho c/s 12 nos 79 hose 13 nos 80 hose 01 nos 81 valve spring 24 nos 82 diesel filter 18 nos 83 connecting rod bearing 12 nos 84 l.f.bearing 10u/s 05 nos 85 main bearing bush ruston 02 nos 86 small end bush 06 nos 87 main bearing seal ruston 01 nos 88 valve guide ruston 04 nos 89 thrust washer 06 nos 90 piston assly [std] 11 nos 91 reliet valve assly 02 nos 92 oil seal ruston 02 nos 93 banjo bolt with tail 03 nos 94 exhaust silencer 02 nos 95 filter dise 12 nos 96 adaptor for filtr 03 nos 97 washer connecting rod 12 nos 98 main bearing narrow 10u/s 06 nos 99 connecting rod 20 nos 100 main bearing wide 20u/s 05 nos 101 joint 04 nos 102 gasket 07 nos 103 v belt a/57 01 nos 104 piston ring 02 nos 105 corrosion register 01 nos 106 banjo bolt belt 08 nos 107 guide for valve 06 nos 108 bushing gear cover 04 nos 109 piston ring 18 nos 110 cir clip ra-6 12 nos 111 piston pin ra-6 06 nos 112 fuel filter elements (pre) 18 nos 113 fuel filter elements (micro) 19 nos 114 expansion bellow of outlet 02 nos 115 banjo bolt (hallow bolt) 01 nos 116 banjo bolt 01 nos 117 copper washer 12 nos
Tender For corrigendum : repair /maintenance/replacement of butterfly valves, sluicevalve, non-return valve, and supply of water treatment chemicals with allied works at ayodhya cantt under age(i) ayodhya
Tender For begumpur bapnot block: madlauda panchayat: waisari dist.: panipat annual maintenance work for water supply. - ci valves - sluicevalve spindle, spindle check nut, cid joints work at begumpur bapnot
Tender For repair replacement and improvement of external water supply pumping pipe line rising main including air relife valvesluicevalve nrv and other connected items at naval station karanja