Latest valve sluice Tenders | Government valve sluice Tenders

Central Government/Public Sector

CTN :41251559

19 Aug, 2025 NA

Aizawl - Mizoram

Tender For supply of valve inlet and exhaust , valve seal inlet and exhaust , timing chain set , timing chain tensioner , cylinder head gasket , tappet cover packing , gasket cylinder base , dowel pin , cylinder block , piston with ring , gudgeon pin with lock , spark plug , oil filter , clutch plate , pressure plate , union bolt oil pump with banjo washer , gasket magneto cover , needle roller bearing , clutch cover packing , rear disc , rear brake pad , ana bond tube , tappet cover bolt 10 no size as per sample , front shocker seal , gasket exhaust muffler , speedometer sensor

Central Government/Public Sector

CTN :41267346

04 Sep, 2025 NA

Kurukshetra - Haryana

Tender For supply of single head solenoid valve

State Government

CTN :41249845

13 Aug, 2025 84.52 Lacs

Banaskantha - Gujarat

Tender For supplying and providing spare parts for pumps(no 1,2 and 3) and induction motors at bhadath pumping station included in changa dantiwada pipeline project. - providing spares for horizontal split case pump make: wpil, rpm-750, discharge - 5100 cum/hr, head - 42 m no of stages – two and induction motor make-jyoti ltd. capacity- 750 kw at bhadath pumping station for changa dantiwada pipeline project, providing and supplying pump shaft including loading, unloading, freight unit approved rates, providing and supplying sleeve( line shaft) including loading, unloading, freight unit approved rates, providing and supplying bearing 6222 c3 including loading, unloading, freight unit approved rates, providing and supplying pump bearing housing loading, unloading, freight rates as per rate analysis no. 1, providing and supplying wear ring (impeller) loading, unloading, freight unit approved rates, providing and supplying wear ring (casing) loading, unloading, freight unit approved rates, providing and supplying pump impeller including loading, unloading, freight rates as per rate analysis no. 1, providing and supplying bearing nu 324 c3 including loading, unloading, freight unit approved rates, providing and supplying bearing nu 326 c3 including loading, unloading, freight unit approved rates, providing and supplying bearing 6324 c3 including loading, unloading, freight unit approved rates, providing and supplying isi mark di d/f sluice valves as per is:14846 (latest edition) of following class and diameter including all taxes, insurance; transportation, freight charges, octroi, inspection charges, loading, unloading.conveyance to departmental stores, stacking etc. complete. (pn-1.6 with manually operated through gear box, non rising valve) dia 1000 mm rates as per rate analysis no. 2, providing and supplying battery set with float cum boost charger 200 ah, 2 v dc, model- upst including all taxes, insurance; transportation, freight charges, octroi, inspection charges, loading, unloading.conveyance to departmental stores, stacking etc. complete. rates as per rate analysis no. 2

Central Government/Public Sector

CTN :41209674

05 Aug, 2025 5.30 Lacs

Chittorgarh - Rajasthan

Tender For supply of general items - harpic 750 ml , broom large , colin , air wick sachet , air freshner spray , phenyle white , phenyle black , bamboo stick 8 ft , bamboo stick 20 ft , fawdi for sewer cleaning with iron handle , grinding wheel paper 60 no , pencil cell aa , lancer set , almirah lock , glass silicon , thinner oil , ghadi detergent , black paint , white paint , fevicol , chuna for paint , geru powder , chuna powder , measuring tape 5 mtr , khunt handle wooden , hand grinder bosch , soap dispenser , office dustbin steel , dustbin 60 ltr , goggles for welder black , hand gloves rubber , tow chain belt with hook 75 mm 5 mtr , heavy duty tool box multipurpose , hedge cutter machine , right angle , wrench pana 12 inch adjustable , wrench pana 14 inch adjustable , tower bolt , abro tape , surf excel surf top load , bhc powder , pvc nylon wire for brush cutter , mop set , curtain patti , curtain bracket , ss wire mesh , phool jhadu , wiper , welding rod , white cement , plywood 19mm sainik waterproof , plywood 12mm sainik waterproof , plier taparia , screw driver 4 cut taparia , hexa frame , pvc nail clip 8 mm , pvc nail clip 10 mm , pvc nail clip 25 mm , 2 core wire havells , havells wire 0 point 75 mm 2 colour , havells wire 1 mm 2 colour , havells wire 1 point 5 mm 2 colour , mccb 100 amp 4 pole , mccb 200 amp 4 pole , mccb 400 amp 4 pole , fm 1 timer , fan regulator socket type anchor , fan capacitor 2 point 5 mfd , grass pad for desert cooler , pvc gang box 2 plus 2 , led light 30w bajaj , led tubelight 20w phillips syska , pvc casing 1 inch , power plug gang box 16 amp anchor , gi union 1 2 inch , gi union 1 , gi nipple 1 2 inch x2 inch , gi nipple 1 2 inch x 6 inch , gi socket 2 inch , float valve cock 1 2 inch set , pvc waste coupling , cp jali 2 inch , cp jali assorted 5 types , gi socket 1 2 inch , gi socket 1 inch , teflone tape , pillar cock head half turn , gi axe nipple 1 2 inch , pvc solvent , pvc elbow 110mm , pvc elbow 63mm , pvc socket 63mm , cpvc pipe 1 2 inch , iron trunk 3x3x6 , foot mat rubber red , green net , iron cut kabja , cloth hanger iron

Central Government/Public Sector

CTN :39992171

13 Aug, 2025 3.98 Lacs

Mumbai - Maharashtra

Tender For corrigendum : supply of obs inlet air filter dry b type , valve assyi l hv sp ex45 trc 2 , valve assly dis hvsp , valve finger type dia 70 cyl , valve finger type dia 50 cyl , gasket 70 cyl to valve flat , gasket valve flat to 70 head , gasket 50 cyl to valve flat , gasket valve flat to 50 head , obs del ul valve 3 by 4 inch bsp , obs nrv assy 1 half inch bspteflon , bush centering sstshpsp , souvassy 220 v g1 by 4 inch no 3 by 2 , temp switch-vt tl999l by kp81 , pressure switch hp 10 by 20 , auto drain valve , 1 st stage pressure gauge 0 to 10 kg per cm2 , 2 st stage pressure gauge 0 to 25 kg per cm2 , 3 st stage pressure gauge 0 to 45 kg per cm2 , svassy 3 by 4 inch bsp 18 ksc , svassy 3 by 4 inch bsp 07ksc , safety valve by sv assy 1 by 2 inch bsp 36 kschp , head dia so cly sp m by c sp 10 by 12 , head dia 127 m by c hv , piston ring dia 70 , piston ring dia 50 , solenoid valve no 12 vdc

Central Government/Public Sector

CTN :41189625

02 Aug, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : complete pump and spares of grundfos make clo2 dosing pumps for tstpp - complete assy,dda 120-7,pump, kit valve,99151370,dda 60-10 ar-pvc/v/+, comp p/p assy,grundfos,dme 940-4 ar, spare kit,96520480,grundfos, valve+diaphragm kit,99151314,grundfos, diaphragm kit,99151385,grundfos, dosing head kit,99151404,grundfos

Central Government/Public Sector

CTN :41258848

09 Aug, 2025 NA

Vellore - Tamil Nadu

Tender For supply of c040126 round head notch ag 100v,c040141 casing ag 100v,c040140 circlip ag 100v,c040135wheel guard ag 100v,c040134 wheel front flange ag 100v,c040133 wheel rear flange ag 100v,c040132 helisert ag 100v,c040131 helisert ag 100v,c040130 o ring ag 100v,c040129 o ring ag 100v,c020632 ball bearing b 7z ag 100v,c020119 ball bearing b 6 ag 100v,c040125 outer snap ring ag 100v,c040124 inner space ring ag 100v,c040123 internal snap ring ag 100v,c040122 key ag 100v,c040121 roll pin ag 100v,c040119 allen head bolt ag 100v,c040118 allen head bolt ag 100v,c040117 allen head bolt ag 100v,c040116 front cover ag 100v,c040115 wheel spindle ag 100v,c040114 front plate ag 100v,c040113 blades ag 100v,c040112 rotor ag 100v,c040111 cylinder ag 100v,c040110 rear plate ag 100v,c040109 cone spring ag 100v,c020121 roll pin ag 100v,c020505 steel ball ag 100v,c040106 oil plug by grub screw ag 100v,c040105 air inlet bush ag 100v,c040104 throttle trigger ag 100v,c040103 valve rod ag 100v,c040102 valve bush ag 100v,c040101 casing ag 100v

State Government

CTN :41234048

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of c/f pump (clear water) and its accessories at saraswatipur rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-15 kw/20hp as per is:5120, capable for discharging 72 m3/hr against a head of 40 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -72 m3/hr and head - 40m (1w + 1s) 20 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 20 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors), providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house., construction of chamber for 100mm sluices valve.

State Government

CTN :41234051

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of vt pump (raw water) and its accessories at saraswatipur rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-22kw/30hp approx as per is 1710, capable of discharging 94.56 m3/hr against a head of 50 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -94.56 m3/hr and head - 50m (1w + 1s) 30 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 30 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job for raw water vt pump set., cost towards jointing newly installed pump motor set to the existing header at raw water p/p., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 160 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismantling of old pump set and foundation and making arrangements for removal of debries from the pump house.

State Government

CTN :41234052

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of items of vt pump (raw water) and accessories at gumuria rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-7.5 hp approx as per is 1710, capable of discharging 24.5 m3/hr against a head of 30 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, foot valve, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -24.5 m3/hr and head - 30m (1w + 1s) 7.5 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 7.5 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards jointing newly installed pump motor set to the existing header., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63 a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, phase indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 6 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.

Valve Sluice Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors