Latest valve sluice Tenders | Government valve sluice Tenders

CTN :45741643

16 Jul, 2026 NA

Tinsukia - Assam

Tender For supply of brg clutch release 2326570 coo , weather strip , drive assy , arm wind screen wiper s a of wiper , repair kit pumping assy , horn assy high tone , cap actuator , electric fan assy , bearing frt wheel , reverse light , air filter element safety , oil filter assy , starter motor assy , nozzle , pump water , flat seal ring , camplate , valve brake pneumatic , repair kit , adjusting pin , roller , gasket cylinder head , motor assy wiper , battery cut off switch , repair kit minor slave cylinder , cable assy control , cable assy clutch control complete , oil seal , wire harness , glass bedding

CTN :45724340

06 Jul, 2026 7.75 Lacs

Multi City - Telangana

Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.

CTN :45712951

07 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of gasket , packing ring , collar , sendiment drain valve kit , reducer valve 70 kg repair kit , electro pneumatic valve kit , apr kit , air bottle valve

CTN :45253273

01 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For bid to ras supply of copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , ready mix plaster 40 kg bag , gi wiremesh of standard width each roll 15 mtrs , plywood bwr grade 12mm thick 7ft by 3ft , cushion 560by530by100mm of 40 density cool foam covered with zip tapestry cloth , hydraulic door closer , sluice valve 200mm cast iron , gi pipe 50mm , epoxy based zink phosphate primer , cushion for chair dining of size 450by450mm covered with zip tapestry cloth , plywood bwr grade 12mm thick 8ftby4ft , gi pipe 25mm medium gde , ms wire mesh of standard width as per sample , curtain rod 3 mtr length 25mm dia , gi pipe 40mm medium gde , ball cock with rod and ball 20mm float valve , liquid water proofing compound dpc , gi pipe 20mm medium gde , sluice valve 100mm cast iron , ball cock with rod and ball 15mm float valve , sluice valve 150mm cast iron , gi pipe 80mm medium gde , ball cock with rod and ball 25mm float valve , plywood bwr grade 12mm thick 6ftby3ft , butt hinges 100mm aluminium alloy anodise , gi pipe 15mm medium gde , m seal , sluice valve 80mm cast iron , tower bolt 150mm aluminium anodised barrel , oil putty for window glass fitting ) /bid number : gem/2026/b/7481230 * /dated: 19-05-2026 & & / bid document 1 / 40

State Government

CTN :45701433

29 Jun, 2026 NA

Jhajjar - Haryana

Tender For hiring of hydra machine,job work for the repair of sluice valve, sluice valve opening key

State Government

CTN :45676238

03 Jul, 2026 12.42 Lacs

Dharmanagar - Tripura

Tender For uws scheme 2025-26/ sh- providing installation, commissioning of 2 nos. 227 m3/h capacity,76 m head (total) clear water horizontal split casing centrifugal pumpset alongwith all accessories for wtp at dharmanagar 2025-26 - providing fitting fixing of 227 m3/hr capacity. 76 m head (total) clear water horizontal split casing centrifugal pump with bronze impeller, shaft (en 8), ss sleeve bush, flexible pin bush type coupling (kirloskar / wpil/grw / mather platt make) to be used with existing horizontal foot mounted squirel cage induction motor of capacity 100hp, 1500 rpm, horizontal (bch make) including all allied accessories complete in/c installation and commissioning and testing as per specification and direction of the engineer-in-charge(excluding suction /delivery pipe, foot valve. non return valve, sluice valve, electrical panel board and other electrical accessories and civil works)

CTN :45672591

15 Jul, 2026 6.47 Lacs

Bardhaman - West Bengal

Tender For supply of non retrun valve , sluice valve , guide rope bushing , steam valve , feed check valve , gt valve flngd

State Government

CTN :45656095

30 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of pneumatic spares for arw system at chpa,cstps. - power cylinder 4" dia l=710 mm complete, station power cylinder 6" dia l=1190 mm, repair kit for power cylinder 6" dia, repair kit for power cylinder 4" dia, solenoid valve with 3 inlet & 2 out lets.

CTN :45631517

10 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For mechanical maintenance of equipments in converter shop, hmdp, lp bay,scrap yard and slag yard in sms-2- preventive maintenance of oxygen lance system in sms #2, preventive maintenance of tilt drive system charging and taping doors of converter in sms #2, preventive maintenance of slag cut off dev in sms #2, preventive maintenance of relining car and allied lining equipment, periodic inspection and testing of oxygen lance mechanism of converter in sms #2, periodic inspection of converter tilt drive sms#2 and attending minor points, preventive maintenance of hmdp equipment, preventive maintenance of equipment in aro rinsing station in converter shop of sms #2, preventive maintenance of slag pot transfi car in sms #2, preventive maintenance of scrap box trans car in sms 2, , preventive maintenance of ladle tilter, replacement of lance body, repair of lance body, shifting jam cutting, patch pipe welding and other minor repairs of lance assemblies in sms 2., replacement of oxygen/water hose of lance, replacement of carriage gear box, rope drum pulleys etc in lance drive mechanism slag cut off device of sms #2., repair and replacement of slag skirt segments in converters of sms #2, repair and replacement of radial heat shields on drive side and non drive side of converter in sms #2, repair and replacement brick retainer plates, tap hole dummy flanges providing anchors etc in converters of sms#2, repair of bottom rinsing system pipes tuers, hoses supporting structure etc in converters of sms #2, replacement of converter shell tap hole barrel shells of scrap chutes, ladle shells etc in sms #2, repair of slag pots in sms #2 by welding, replacement of gear boxes up to 350 kg weight in bulk material charging system of sms, replacement of gear boxes of 351 kg to 850 kg weight in bulk material charging system of sms #2, replacement of damaged parts and alignment of fluid coupling co 62a/co 67 a/co65a conveyors, replacement of pulley assemblies of sizes up to 500 mm in belt conveyors in sms #2, replacement of pulley assemblies of sizes 600 mm and above in belt conveyors in sms #2, repair of chutes replacement of steel chute liners etc in conveyor system, replacement of rubber or poly profane liners, replacement of pneumatic cylinders of clam shell gates.gas flaps.compensators and diversion gates etc of bulk material charging system of sms 2, replacement of damaged chutes (other than conveyor chutes) of bulk material and ferro alloy charging system of sms #2, replacement of assemblies like, pneumatically operated diversion gate/gas flap gas lock valve etc ein bulk material charging system of sms#2", replacement of gear boxes in sptchmdp car in sms #2, replacement of wheel assembly in sptc/hmdp car of sms #2, replacement of gear boxes in stc/platform car/hot metal ladle transfer cars of sms #2, replacement of wheel assemblies in stc-platform car hot metal ladle transfer cars of sms #2, replacement of rails in converter section of sms#2, repair of steel teeming ladle hot metal ladle in sms #2 before relining, carrying out miscellaneous mechanical maintennace jobs of type lin converter section of sms #2, carrying out miscellaneous mechanical maintennace jobs of type z in converter section of sms #2, carrying out miscellaneous mechanikal maintennace jobs of type 3 in converter section of sms #2, perkidic inspection of equipments in converter shop, isbh, slag yard, scrap yard and lp bay in sms#2, repair and replacement of technological structures in converter section of sms #2, requir and replacement of auto coupler fixing bracket in steel terming ladles, carrying out steam parging in ladle driers/heaters of sms 2

CTN :45415159

25 Jun, 2026 4.58 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : repair and maintenance of tube wells and boosters including repair of water level gauge, ms panel, sluice valves and allied items of civil / electrical at various buildings i.e. punjab raj bhawan, haryana raj bhawan & residence sector-7, under maintennace booth, sector-7, chandigarh. (ch to: 2216 (np) mtc. and repair ) - repair of ci sluice valve up to 150 mm dia including dismantling, repair / replacement of spindle, nut , rubber packing, nuts and bolts complete., up to 100 mm dia, lifting and lowering of submersible pump set including dismantling of flenged joints, taking out column pipes, re-jointing etc including replacement of defective packing, nuts and bolts etc complete, tube well, booster, supplying and fixing of single phase preventor make minilec or equivalent model of approved make to the satisfaction of eic , supplying and fixing of current transformer ( ct ) for ampere meter of suitable rating complete., supplying and fixing of overload relay of following capacities, 14 to 23 amp, 30 to 42 amp, 45 to 75 amp, providing and fixing of star delta starter timer of make l&t or equivalent model of approved make to the satisfaction of eic, providing and fixing of kit kat 500 amp complete in all respect, supplying and fixing of capacitor of 20 to 50 mfd make l&t, siemens or equivalent model of approved make to the satisfaction of eic , supplying and fixing of analog meter of make l&t ( rishabh ) or equivalent model of approved make to the satisfaction of eic , volt meter, ampere meter, supplying and fixing of 3 pole mccb of following capacity of make l&t, bch, havells or equivalent model of approved make to the satisfaction of eic , 100 amp, supplying & fixing of contactors block of make l&t, bch or equivalent model of approved make to the satisfaction of eic , mnx - 25, mnx - 32, mnx - 50, mnx - 70, supplying and lowering of submersible cable 16mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , supplying and lowering of submersible cable 25mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , providing and fixing hydro pneumatic pump of size 0.5 hp of approved make with 24 ltr capacity tank, pressure switch, pressure gauge, nrv accessories and making connections complete of make crompton or equivalent model of approved make to the satisfaction of eic, repair and rewinding of submersible pump set including carriage from installation to workshop and back. the rate include replacement of all defective parts of pump and motor rewinding., 5 hp, 7.5 to 10 hp, 35 hp to 55 hp, repair and rewinding of monoblock submersible pumping set including repacement of defective parts as required and carriage from installation to workshop and back., 0.5 h.p, 1 h.p, 2 h.p, manufacturing, supplying and fixing of ms control panel 16 gauge of size 600x700mm with door including wiring of inside panel, complete in all respect, providing and fixing of self pumping monoblock single phase pump for boosting of make crompton or equivalent model of approved make to the satisfaction of eic, 0.5 h.p, 1 h.p, 2 h.p, providing and fixing of pressure gauge make h-guru or equivalent model of approved make to the satisfaction of eic, providing and fixing of elcb 63 amp make l&t/havells or equivalent model of approved make to the satisfaction of eic, repair of internal control wiring 1.5mm wire with thimbles, nut bolt etc. complete

Valve Sluice Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government