Tender For supply of analog input module 4-20 ma 8 ch , removable terminal block for ai module , 20 pin removable spring terminal blocks , hmi station with scada license s-w , m340 plc cpu mm-bmxp342020 , rack 12 slot for m340 series plc , rack power supply for m340 series plc , digital input card 16 ch 24 vdc sink , digital output card 16 ch trans sink , analog output module 4-20 ma 4 ch
Tender For supply of boundary microphone , digital signal processor , input expansion card , wall mount speakers , column speakers for vc , 4 channel amplifier for wall speakers , 2 channel amplifier for column speakers , 19 inch retractable monitor , 65 inch diagonal 4k side display , pop-up boxes , 20 x ptz 4k camera , av over ip encoder with 3 inputs and usb- c , av over ip decoder with hdmi output , usb over cat6 extender , touch control panel , wireless presentation device for byom , poe plus plus network switch with special av features , cables and connectors , equipment rack accessories for mounting inside cabinet , installation testing and commissioning including training
Tender For supply of spare material/cards for solid state block proving by axle counter (ssbpac) of m/s efftronics make, as per boq. - supply of mother board double line suitable for solid state block proving by axle counter (ssbpac) as per rdso specification: rdso/spn/175/2005 ver.1 of m/s efftronics make/model: efftronics sys pvt ltd. inspection- consignee, supply of cpu module (eff -528m7 or latest) suitable for solid state block proving by axle counter (ssbpac) as per rdso specification :rdso/spn /175/2005 ver.1 of m/s efftronics make/model: efftronics sys pvt ltd. inspection- consignee, supply of voter card module (eff -530m2 or latest) suitable for solid state block proving by axle counter (ssbpac) as per rdso specification :rdso/spn /175/2005 ver.1 of m/s efftronics make/model: efftronics sys pvt ltd. inspection- consignee, supply of spare block telephone suitable for solid state block proving by axle counter (ssbpac) as per rdso specification :rdso/spn /175/2005 ver.1 of m/s efftronics make/model: efftronics sys pvt ltd. inspection- consignee, supply of adaptor card (eff-690m 1 or latest) with ribbon cable suitable for solid state block proving by axle counter (ssbpac) as per rdso specification :rdso /spn /175/2005 ver.1 of m/s efftronics make/model: efftronics sys pvt ltd. inspection- consignee, supply of scrambler card with ribbon cable (eff -645m1 or latest) suitable for solid state block proving by axle counter (ssbpac) as per rdso specification :rdso /spn /175/2005 ver.1 of m/s efftronics make/model: efftronics sys pvt ltd. inspection- consignee, supply of 2 out of 3 pcbs (eff -989 or latest for solid state block proving by axle counter (ssbpac) as per rdso specification :rdso /spn /175/2005 ver.1 of m/s efftronics make/model: efftronics sys pvt ltd. inspection- consignee, supply of display card of block panel (eff-688m or latest) suitable for solid state block proving by axle counter (ssbpac) as per rdso specification :rdso /spn /175/2005 ver.1 of m/s efftronics make/model: efftronics sys pvt ltd. inspection- consignee, supply of non-vital output module (eff- 531m3 or latest) suitable for solid state block proving by axle counter (ssbpac) as per rdso specification :rdso/spn/175 /2005 ver.1 of m/s efftronics make/model: efftronics sys pvt ltd. inspection- consignee, supply of vital output module (eff - 532m3 or latest) suitable for solid state block proving by axle counter (ssbpac) as per rdso specification :rdso/spn /175/2005 ver.1 of m/s efftronics make/model: efftronics sys pvt ltd. inspection- consignee, supply of input module (eff -529-m3 or latest) suitable for solid state block proving by axle counter (ssbpac) as per rdso specification :rdso/spn/175 /2005 ver.1 of m/s efftronics make/model: efftronics sys pvt ltd. inspection- consignee, supply of communication card module (eff -533m5 or latest) suitable for solid state block proving by axlecounter (ssbpac) as per rdso specification :rdso/spn/175/2005 ver.1 of m/s efftronics make/model: efftronics sys pvt ltd. inspection- consignee, supply of auto changeover card which includes one voice modem circuit & one ei converter circuit suitable for single section block proving axle counter (digital) type block instruments as per rdso specification :rdso /spn /175/2005 ver.1 of m/s efftronics make/model: efftronics sys pvt ltd. inspection- consignee
Tender For purchase of chemicals - purchase of chemicals, co sensor:0 5000 ppm range, (50 ppm + 3%) accuracy, uart/i c interface, 3.6 5.5 v dc, 10 c to +60 c, combo sensor (temp, humidity, barometric pressure, vocs):digital i c/spi interface, operating range 40 c to +85 c, supply voltage 1.7 3.6 v, rain detection module:analog/digital output, 3.3 5v dc, corrosion-resistant pad, light intensity sensor:400 700 nm range, i c/analog output, measures ambient light in lux, wind speed and direction integrated sensor:360 direction, 0 60 m/s speed range, analog/digital output and suitable for outdoor climatic monitoring, 220v ac power cable, smps (ac to dc power supply, 5v & 12v output):ac to dc power supply, 5v & 12v output, smps (ac to dc power supply, 24v output):ac to dc power supply, 24v output, esp32-wroom-s2 module: wi-fi-enabled mcu, 32-bit lx7 core, 4mb flash, uart/spi/i c interfaces, operating voltage 3.0 3.6 v, led indicators:3mm/5mm, red/green/blue, 2v 3.3v forward voltage, for status indication, lcd display:16x2 characters, hd44780 compatible, i c interface, 5v dc, i/o connectors (2-pin, 3-pin, 4-pin, rmc):2/3/4-pin, rmc type, pitch 2.54 mm, for sensor and power interfacing, real time clock (rtc) module:i c interface, battery backup, accurate timekeeping for data logging, gsm gprs module sms chip:quad-band 850/900/1800/1900 mhz, supports uart interface, sim card slot, 3.4 4.4 v dc input, wires (jumper, power, signal wires combined)rainbow wires - 10 core, red and black wires - 10 core and 5 core, 1.5 sq mm electrical wires, 2 sq mm electrical wires, soldering paste:no-clean flux, sn63/pb37 alloy, for smt component soldering, soldering lead:60/40 alloy with flux core, 0.5 1 mm diameter, universal pcb prototype board double-sided:double-sided fr4, 2.54 mm pitch, tinned pads for soldering, xt60 connectors:high-current (up to 60a) dc connectors, enclosure box (for electronics):weatherproof (ip65/ip66), uv-resistant abs/polycarbonate, wall/pole mountable, suitable for outdoor sensor and control units, zip ties:nylon, self-locking, 100 300 mm length, cooling fan (5v):5v dc, 40mm, brushless, sleeve bearing., switches:(5 amps, 10 amps, 20 amps), lead acid battery (12v):rechargeable, sealed maintenance-free, capacity 7ah 26ah, sunlight ultraviolet ray intensity (uv) sensor:detects uv radiation in 280 400 nm range, outputs uv index (0 11+), analog/digital interface, suitable for outdoor uv monitoring, lead acid charger:12v output, automatic overcharge protection, input 100 240v ac
Tender For tender for supply of fire alarm system =- philips pc-2300 spare fire alarm system panel mounted card addressable detector interface module card adim card part nor-4015 101 80081 , philips pc-2300 spare fire alarm system panel mounted card non addressable detector interface module card nadim card part nor-8215 3013 7230 , philips pc-2300 spare fire alarm system panel mounted card digital output card part nor- 4015 101 73762 , philips pc-2300 spare fire alarm system panel mounted card digital input card part nor- 4015 101 73041 , philips pc-2300 spare fire alarm system panel mounted card keyboard interface card part nor- 4015 101 73752 , philips pc-2300 spare fire alarm system panel mounted card modem cards dual cards part nor- pc-2304 , philips pc-2300 spare fire alarm system panel mounted card bus expansion cards part nor- 4015 101 57233 , philips pc-2300 spare fire alarm system panel mounted card power supply cards part nor- pc 2390 779 , philips pc-2300 spare fire alarm system panel mounted card lcd interface card part nor- 4015 101 73421
Tender For ece lab items dept use - eliminator transformer (step-down) kitinput - 220v - 240v ac, 50 hz, output-2v to 12v dc, 0-2 a ripple: 5mv, strain gauge trainer kitmetal foil strain gauge mounted on beam/cantilever strain measurement under applied load wheatstone bridge arrangementsignal conditioning and amplification circuitinstrumentation amplifiers, 3 digit display of strain / output voltage zero and gain adjustment controlsprovision for applying calibrated loads regulated power supply, 230 v ac, 50 hz table-top trainer with labeled paneltest points to measure the signalsbuilt in power supplies and wooden closed cabinet supplied with patch cords and experiment manual, temperature measurement kitsensors: rtd (pt-100), thermocouple (fe-k/j-type), and/or thermistor (ntc).display: 3 digit led/lcd digital display (typically 200mv fsd). temperature source: portable water kettle or heater block.signal conditioning: on-board circuitry for amplification, linearization, and cold junction compensation.test points: multiple 2mm/4mm banana sockets for monitoring input/output signals.power supply: 230v ac, 50hz, single-phase.accessories: includes a glass thermometer, ntc thermistor probe 10k, k-type thermocouple probe, patch cords, and instruction manual., sim reader trainer kitsim compatibility supports 2g 3g 4g lte sim cards,sim reader mode: reading writing gsm sim card data, imsi, ki codes, phonebook interface usb 2.0 or rs 232 serial port for pc communication.clock frequencies: selectable frequencies 3.579 mhz, 7.159 mhz, 14.318 mhz for sim card operation.power supply: onboard smps 12v 2a or 5v dc with overload protection. hardware components:6-pin or 8 pin sim card socket.led indicators for power, sim reset, and data activity.optional lcd 128x64 and keypad 20 keys for standalone operation. software tools support for at commands gsm etsi 07.0707.05, sim manager utilities, and data logger functionality. common trainer kit featuresfault simulation ability to create faults e.g., sim not detected, vcc failure for troubleshooting.test points: multiple test points e.g., 55 nos for observing signals sim rst, clk, i o via oscilloscope.construction tested glass epoxy pcb, often housed in a study educational case., dual output regulated dc variable power supplydual output regulated power supply- input voltage: 230v/50hzac- output voltage: (0 30v)dc- output current: (0 2a)dc- protection circuit: over voltage and over current protection, short-circuit protection- high efficiency: greater than 85%- low ripple and noise: less than 50 mv, lvdt sensor trainer kitac mains power supply : 230v 10%, 50hzfixed regulated dc power supply : +5v, 12v 500matransducer : lvdtlvdt displacement : 20mm (40mm total)displacement scale : linear 20mmdisplacement display (mm) : red color 3 digit led displayexcitation frequency : 4khzexcitation voltage : ac variable 5v, dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc, accuracy: class 0.5( 0.5 % full-scale), dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc, accuracy: class 0.5 ( 0.5 % full-scale)
Tender For purchase of equipments ( s.no 1 to s.no 5 ) for ece department - purchase of equipments, dso (digital storage oscilloscope) bandwidth: 50 100 mhz. sampling rate: 1 gs/s. channels: 2 (minimum). power supply: 100 240 v ac, 50 60 hz. automatic measurements: vpp, vavg, vrms, frequency, period, vmax, vmin, rise time, fall time, +width, width, +duty, duty, etc. horizontal scale: 5 ns/div 50 s/div or equivalent. vertical resolution: 8 bits (2 channelssimultaneously). vertical sensitivity: 1 mv/div 10 v/div (at input). waveform math: +, , , , invert, fft, etc. waveform storage: 16 waveforms or equivalent. communication interface: usb host and usb interface. display: 7-inch color display or equivalent. input impedance: 1 m 2% || 20 pf. accessories: 2 passive probes (1x/10x), 8051 micro controller kit operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., embedded trainer kit (using lpc 2148) cpu - lpc2148, core - 16/32 bit arm7tdmi-s speed - max 60 mhz, flash - 512kb, ram (on-chip) 40kb, 46 general purpose i/opins, usb2.0 one 10bit a/d converter with 14 analog inputs, one 10bit d/a converter, six pwm & watchdog two uarts (16c550), two i2c (400kb/s), two spi eight bit digital output, eight bit digital input,16x2 characters lcd and 4x4 matrixkeypad one potentiometer for giving analog input, relay& buzzer interface i2c devices: rtc, eeprom and seven segment display, on board stepper motordriver lm35 temperature sensor, one rs 232 lines are terminated at 9 pin d type connector and usb interface board has inbuilt power supply and mounted in sturdy cabinet accessories usb cable with utility software to download programs from pc to target board power cord, user manual, strain guage trainer kit ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., sim reader trainer kitpower supply: operates on 230 v ac 10%, 50 hz mains supply. built-in regulated smps power supply. operating dc supply: 5 v / 12 v with overload and short-circuit protection. sim card interface: supports gsm sim cards compatible with 2g /3g / 4g / 5g networks. sim card read/write interface. supports sim card initialization, authentication,and communication functions. compatible with standard 6-pin / 8-pin sim cardsockets.communication interface: usb 2.0 interface for pc communication. rs-232 serial communication interface. uart communication facility for embeddedsystem interfacing. sim operating parameters: selectable sim clock frequencies: 3.579 mhz 7.159 mhz 14.318 mhz sim supply voltage selection facility. sim reset and activation control.supported protocols and standards: gsm etsi 07.07 and etsi 07.05 at commandsupport. iso/iec 7816 smart card communication support. sim communication command monitoring facility.hardware features: on-board sim card socket. led indication for: power status sim detection reset activity data transmission/reception built-in keypad for standalone operation. lcd display module (128 64) for menu andstatus display. on-board microcontroller-bas
Tender For for electrical and communication engineering department lab equipments are required as per new syllabus - upgradation of labarotariesece department, 8051 micro controller kit operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., single phase induction motor1 hp, 230 v ac, 1500 rpm with loading arrangement 1 no.voltmeter: (0 300) v ac, 96 96 mm with input terminals 1 no.ammeter: (0 10) a ac, 96 96 mm with input terminals 1 no.wattmeter: 2 kw, 96 96 mm with input terminals 1 no.power factor meter: 96 96 mm with input terminals 1 no.auto transformer: 0 300 v, 1 variac 1 no.mcb: 2-pole, 40 a / 230 v ac 1 no.digital rpm indicator with proximity sensor 1 no.aluminium brake drum: 230 mm diameter 1 no.spring balance: (0 25) kg 02 nos.circuit diagram printed on front panel with instruments and connecting terminals.motor and loading arrangement mounted on rigidchannel frame with anti-vibration mounting pads, m12 1.5 bolt & nut, 85 mm dia 4 nos.mild steel powder-coated electrical panel tablesetup., auto transformerinput: 230 240 v ac, 50 hz.output: variable (0 270) v ac.rating: 1 kva.insulation class: class f / class h.construction: copper winding with carbon brush arrangement.mounting: bench-top / panel type.protection: suitable fuse / overload protection., dth trainer kitpower supply: 200 v to 240 v ac, 50 hz. dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter): input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency:tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m. controls: channel selection. volume control. fault simulation: five built-in simulated faults for troubleshooting experiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption. pcb size: 15" 12" with multicolour section-wise block diagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna. additional features: dth subscription connection with doordarshanfree channels., sim reader trainer kitpower supply: operates on 230 v ac 10%, 50 hz mains supply. built-in regulated smps power supply. operating dc supply: 5 v / 12 v with overload and short-circuit protection.sim card interface: supports gsm sim cards compatible with 2g / 3g / 4g / 5g networks. sim card read/write interface. supports sim card initialization, authentication, and communication functions. compatible with standard 6-pin / 8-pin sim card sockets.communication interface: usb 2.0 interface for pc communication. rs-232 serial communication interface. uart communication facility for embedded system interfacing.sim operating parameters: selectable sim clock frequencies: 3.579 mhz 7.159 mhz 14.318 mhz sim supply voltage selection facility. sim reset and activation control. supported protocols and standards: gsm etsi 07.07 and etsi 07.05 at command support. iso/iec 7816 smart card communication support. sim communication command monitoring facility. hardware features: on-board sim card socket. led indication for: power status sim detection reset activity data transmission/r
Tender For tender for supply of pressure transmitter - compressor discharge lube oil , temperature element , solenoid valve body capacity control , hot gas bypass solenoid valve body 240 ra 8 t7t , pilot operated solenoid valve , evm plunger for capacity control solenoid valve , level switch , oil level switch , digital flow rate cum totaliser switch , auxillary contactor 24v dc , add-on block for auxillary contactor , aux. contactor-2no- 2nc coil voltage 24 vdc , under voltage relay 3 ph minilec vct-d2 , power contactor 230vac siemens 3tf32 00-0am0 , human machine interface hmi-display , digital input card for plc , analogyl input card for plc , digital output card for plc , 3 core cable for 33a 440v , zink plugs for sea water coolers , filter elements sets , fine filter element set , filter elements sets , pressure sensors , temperature sensors , analyzer o2 zro2 24vdc , type 6150 nitrogen membrane module tag no. mm-20 , ball valve size 2-1-8inch , hydrocarbon detectors testo 316-2