Latest vertical turbine pump Tenders | Government vertical turbine pump Tenders

CTN :45740717

27 Jul, 2026 74.98 Lacs

Sangli - Maharashtra

Tender For providing, erecting, commissioning and giving satisfactory test and trial of 250 hp vertical turbine pumps and allied mechanical and electrical equipments for pumping raw water form jackwellat krishna ghat to water treatment plant at miraj

Central Government/Public Sector

CTN :45693049

11 Jul, 2026 NA

Surendranagar - Gujarat

Tender For repair replacement and maint of ext water rising supply line dozing plants submersible pump sets centrifugal pump sets starter panels and cleaning of sump oh tanks with connected items at mil stn dhrangadhra

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

State Government

CTN :45646140

07 Jul, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - supplying , installation, testing and commissioning of vertical turbine pump set with ss impeller capable to discharge 126 m3/hr.against total head of 50 m, (make kirloskar/jyoti/wilo-mather&platt/wpil) coupled with suitable capacity vertical hollow shaft/solid shaft squirrel cage induction motor , rating of motor 20% more bhp than that of pump (make kirloskar /abb /cgl/ siemens) operated on 415 +/- 10% volt, 3 phase , 50 c/s a.c supply , ie3 type as per is:325 and iec:63400-ihaving speed 1450 rpm,with heavy duty m.s. column assembly with ss line shaft and each coloumn of 5 feet length including cost of supplying , fitting and fixing of all required accessories such as cidf sluice valve-1 set, cidf nr valve-1 set, pressure gauge-1 no, strainer-1 no, m.s. channel base plate etc. all complete including cost of taken out existing old pumpset., supplying and installation of fasd starter suitable for above mentioned vt pumpset make lk/bch/schneider., supplying and laying of 25 mm2 , 1.1 kv, 3 core pvc insulated unarmoured copper cable make polycab/kei/gloster, from starter to motor., supplying, installation testing and commissioning of horizontal split casing centrifugal pump set with bronze impeller having discharge 126 m3/hr. against total head of 35 m, (make - kirloskar/jyoti/wilo-mather&platt/wpil), coupled with suitable capacity squirrel cage induction motor, rating of motor 20% more bhp than that of pump(make kirloskar /abb /cgl/ siemens) ,tefc, ie3 type as per is:325 and iec:63400-ihaving speed 1450 rpm,operated on 415 +/- 10% volt, 3 phase , 50 c/s a.c supply, mounted on a commonm.s. base plate including cost of supplying , fitting and fixing of all required accessories such as cidf sluice valve-1 set, cidf nr valve-1 set, pressure gauge-1 no, foot valve-1no, etc. all complete including cost of taken out existing old pumpset., supplying and installation of fasd starter suitable for above mentioned c/f pumpset make lk/bch/schneider., supplying and laying of 16 mm2 , 1.1 kv, 3 core pvc insulated unarmoured copper cable make polycab/kei/gloster, from starter to motor., cost towards complete repairing of control panel at intake well with changing of damaged parts such as :-1.150 amp tpn mccb,50 ka -1 no. as incoming feeder.2. 75 amp tp mccb, 50 ka-2no as outgoing feeder.3.star delta timer-2nos(one for each starter) 4. 32 amp switch fuse unit -01 no. for internal and external light load.5. (0-500 v) volt meter-01 no., ampere meter-01 no.,three phase indicator lamp,powder coating paint,push button on/off,on/off/trip indicator lamp,wiring,etc as per required and testing on full load ., cost towards providing all labour, tools and technicians for taken out and dismantling 40 hp vt p/set with bowl assembly, 6" dia. coloumn pipe and line shaft etc all complete., cost towards dismantling and repairing of complete bowl assembly., cost towards making supplying and fitting s.s. top shaft as per size and sample., cost towards making supplying and fitting of c.i. spider bearing having od 6.5" with rubber bush as per size and sample., cost towards lowering of vt p/set. after complete repairing and assembling works., cost towards complete repairing of control panel at clear water pump house with changing of damaged parts such as :-1.125 amp tpn mccb,50 ka -1 no. as incoming feeder.2. 63 amp tp mccb, 50 ka-2no as outgoing feeder.3.star delta timer-2nos(one for each starter) 4. 32 amp switch fuse unit -01 no. for internal and external light load.5. (0-500 v) volt meter-01 no., ampere meter-01 no.,three phase indicator lamp,powder coating paint,push button on/off,on/off/trip indicator lamp,wiring,etc as per required and testing on full load .

CTN :45630058

04 Jul, 2026 33.14 Lacs

Chittoor - Andhra Pradesh

Tender For supply and delivery of various stages (03 nos) submersible motor with suitable starter at kakavedu in ward no.02, (10 nos) 5hp submersible motor with suitable starter at a) rasappa colony in ward no.05, b) ngaari d/w in ward no. 06, c) netham st colony in ward no.09, d) prakash nagar ward no.15, (01 no) 40hp vertical turbine pump motor at ss tank and (20 nos) 7.5hp submersible motor with suitable starter, materials at a) ntr nagar in ward no.13, b) ekm kamaraja street in ward no. 14, c) karakantapuram d/w in ward no.17, d) sathrawada sc colony in ward no.20, e)sanjivee nagar in ward no.24, f) gandala street in ward no.26, chinthalapatteda d/w in ward no.27 g) raja street chinthalapatteda in ward no.28, h) chakala street in ward no.29 in nagari municipality

State Government

CTN :45600848

25 Jun, 2026 42.25 Lacs

Ranebennur - Karnataka

Tender For repair and replacement of faulty 11/6.6kv c, and servicing of 2mva transformer & 100kva anxillary transformers along with 2 nos of 650hp ht vertical turbine pump and other accessories of tiluvalli lift irrigation scheme in hangal taluk haveri district

Central Government/Public Sector

CTN :45354608

02 Jul, 2026 4.36 Crore

Angul - Odisha

Tender For corrigendum : supply of horizontal centrifugal pump sets 38 lps x 160 mtrs head with flp 550 volts electricals & accessories , vertical turbine pump set, 350 lps x 65 mtr head with 6.6 kv electricals & accessories , vertical turbine pump set, discharge: 270 lps, head: 62 mtrs, electricals: 6.6 kv electricals & acc , horizontal centrifugal pump sets 180 lps x 170 mtr head with 3.3kv electricals & accessories , horizontal centrifugal pump sets, 100 lps and 180 mtrs head with 3.3kv electricals and accessories , horizontal centrifugal pump set 75 lps x 80 mtrs. head with 415 volts electrical & accessories , horizontal centrifugal bare pump 160 lps x180 mtrs head & accessories without prime movers & starter , horizontal centrifugal pump set, 180lps x 200mtr head, 6.6kv electricals and accessories

corporations/Associations/Others

CTN :45529466

20 Jun, 2026 24.94 Lacs

Surat - Gujarat

Tender For supply, installation, testing and commissioning of submerged centrifugal pump set with auto coupling & allied accessories for underground sump & esr of w/s scheme @ appareal park, sachin, gidc, surat.

Central Government/Public Sector

CTN :45565700

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For repair/maint to sluice valve , nrv, cleaning of ug sump and oh tank, centrifugal pump replacement, external water supply pipe line and accessories under ge(af) ta gwalior

State Government

CTN :45290752

23 Jun, 2026 14.35 Lacs

Shoranur - Kerala

Tender For corrigendum : state plan-new work-uwss to mannarkkad phase ii - replacing the existing old and damaged ac and pvc distribution pipes in mannarkkad municiplaity, supply and erection of 35hp vertical turbine raw water pump set, shifting of existing house connection to the newly laid pipe lines -general civil work-1-designing, supplying, erecting, obtaining sanction of power enhancement, trial running , commissioning vertical turbine pump sets of duty condition 81.02 lps dicharge against a head of 22 m- 1 no.

Vertical Turbine Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government