Latest vibration measurement Tenders | Government vibration measurement Tenders

CTN :45716205

15 Jul, 2026 5.00 Lacs

Bagpat - Uttar Pradesh

Tender For supply of conical flask , brix hydrometer , mud flask borosil , measuring cylinder , beaker , edta powder , rain guage meter , test tube stand pvc , reagent bottle , test tube , brix hydrometer wirh thermometer 10 to 20 npl tested ordinary , sodium hydroxide pellets , kalpi make filter paper circle dia 18.50 cm , enameled mug 500 ml , brix hydrometer with thermometer 0 to 10 npl tested ordinary , crucible 50 ml borosil , pol tube 400 mm borosil , fehling solution b,500 ml , fehling solution a 500 ml bottle , buffer solution ph 4 in 500 ml , enameled basin 3 ltr , dry wet thermometer zeal make , brass baumi hydrometer 0 to 10 , glass baumi hydrometer 0 to 10 , sulphuric acid 500 ml packing , buffer solution ph 7, 500 ml , pipette bulb type 25 ml, borosil , universal indicator , bta powder 25 gm packet , glass rod , pol tube 200 mm , indichrome paper wide range , pipette stand , funnel without stem, borosil , buffer solution ph 9.0 in 500 ml , standard ph paper ph 7.0 , standard ph paper ph 2 to 11 , reagent bottle white 500 ml, borosil , pol tube 100 mm , phenopthaline indicator solution 125 ml , absolute alcohol in 500 ml bottle , enameled mug 250 ml , conc. hydrochloric acid 500 ml bottle , burette stand with clamp , measuring cylinder 1000 ml, borosil , pipette bulb type 05 ml,borosil , lead sub acetate 5 kg pack, mark lab , watch glass dia 100 mm, borosil , alpha napthol 100 gm , ph meter table , beaker 100 ml, borosil , brix hydrometer with thermometer 0 to 10 zerman make , pipette graduated borosil 10 m , methylene blue indicator 25 ml , btb solution 500 ml bottle , digital ph meter , hand refractro meter high range , hand refractro meter low range , hot plate , digital balance 15 kg , tissue paper roll , rosaliline in 100 ml , whatsman paper .45 microne , tca reagent 250 ml , formaldihyde in 100 ml , wash bottle in 500 ml , amidol in 100 ml , dnsa reagent in 100 ml , acid molybdate reagent , pipette bulb , magnesium sulphate , naoh sodium hydroxide in 500 gm , potassium hydroxide , sodium iodide , sulphuric acid in 5 ltr bottle , sodium thiosulphate , starch indicator , ferric chloride , mono potassium phasphate , di potassium phasphate , di sodium phosphate , potassium di chromate , ferrous ammonium sulphate , petroleum ether , universal indicator, mark lab , ferroin indicator , ammonium chloride , calcium chloride , potassium iodide , sodium azide , benzene in 5 ltr

CTN :45688413

07 Jul, 2026 NA

Ambala - Haryana

Tender For dynamic balancing of c/f machine basket, distributor at your workshop., vibration measurement, analysis and dynamic balancing at site.

Corporations And Associations And Others

CTN :45651274

29 Jun, 2026 1.99 Lacs

Delhi - Delhi

Tender For procurement t and p items for ward no. 151 (munirka) south zone - supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16" pole type: light weight telescopic tubular aluminum alloy extendable pole no of positions for pole height adjustment: 10 positions locking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kg clutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration, on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle: should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, telescopic petrol operatedpole prunerengine: single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 ccpower output: should be minimum 1.2 hpweight (dry without cutting attachment & fuel): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capacity (ml): must have minimum 200 ml.clutch: clutch shoe linining should be metal only.guide bar length: minimum 30cmguide bar and chain: should have same manufacture onlychain type: every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max. output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain (cm): should be minimum 220 cm - compressed & total length of equipment -minimum 350 cm - extended.sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle extended position: should not be more than 5.5 m/s2certification: must have tuv certification with test standard en iso 11680, petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch.guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only. chain lubrication system: fully automatic speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock, throttle, acceleration, switch off.guaranteed sound power level: should not be more than115 db(a). maximum chain velocity to iso 11681: should be minimum 28 m/s. certification: product should have valid dplf certificate with test standard en iso 11681, supply pvc pipe 1" dia made up of 1st grade

State Government

CTN :45369515

06 Jul, 2026 NA

Multi City - Gujarat

Tender For corrigendum : se 2263: supply, installation, commissioning and testing of vibration monitoring system for continuous vibration measurement at chph for emd chph at sshep (o&m) units, kevadia colony, gujarat.

Central Government/Public Sector

CTN :45623458

10 Jul, 2026 NA

Mehsana - Gujarat

Tender For supply of mud balance (q3)

Central Government/Public Sector

CTN :45579040

15 Jul, 2026 NA

Duliajan - Assam

Tender For tender for supply of rotary evaporator , digital conductivity meter , digital ph meter , mud retort kit , mud retort kit , pressurised mud balance , temperature calibration bath

Central Government And Public Sector

CTN :45527215

04 Jul, 2026 NA

Narora - Uttar Pradesh

Tender For hand held vibration measurement set, as per attached specification.

Central Government/Public Sector

CTN :45319730

18 Jun, 2026 NA

Golaghat - Assam

Tender For corrigendum : providing of operation and maintenance of other machines and plants - online diagnostic testing of ht motors for two years at nrl site item 10 motor current signature analysis,operation and maintenance of other machines and plants - item 20 vibration measurement of motors,operation and maintenance of other machines and plants - item 30 acoustic emission analysis of motors,operation and maintenance of other machines and plants - item 40 emi testing of motors