Latest vibration system Tenders | Government vibration system Tenders

Central Government And Public Sector

CTN :41797260

10 Oct, 2025 NA

Chittorgarh - Rajasthan

Tender For corrigendum : tender for supply of ird mechanalysis turbovisory instruments : : - make- ird mechanalysis limited ird544m-vibration sensor , inductive velocity , top exit , mil 2-pin connector , 42.52mv/mm/s , 10hz-1khz sku - m97120 , make- ird mechanalysis limited stud for vibration sensor item no 1 , mounting/grub screws , 1/4 inch-28unf male , m6x1male sku-stud-m6 provides connection between vibration sensor and mounting pad , m/s ird mechanalysis limited vibration sensor mounting pad mild steel blackodized for ird544m (60x60x16 mm) with m6 thread for item no 1 tapped sku - ms-pad-ird544m , make- m/s ird mechanalysis limited vibration sensor cable assembly for item no 1 , signal cable teflon 3.5mm dia , ss conduit 5mm id , 15 meter length straight , 2 pin ms , shielded , spade lugs at free end sku-m601015spade lugs at free end carry following colour code- red core-signal live black core signal ground green core- signal shield , make- ird mechanalysis limited eddy current pickup set comprising of probe , driver and connecting cable for 9 meter system. constituents.. 1) eddy current pickup , 8 mm tip dia , m10x1 thread. 60 mm long 2) eddy current pickup extension cable , 8 meters length , suitable connectors at both ends for connection to probe as well as driver 3) eddy current probe driver , -24v supply. these will with ird mechanalysis branding , make- m/s ird mechanalysis limited ird8800 rack , 8 position , 5u sku-m88008 this is the bin and will accomodate ird8800 cards , make-ird mechanalysis limited ird8800 (8800) , m88250 (88250) casing vibration module , 2ch velometer input (mv /mm/sec) and 1ch key phasor input , api standard 670 compliant sku-m88250-dc ird8800 series module m88250 can work with all types of velocity output vibration sensors that provide mv/mm/sec output - like ird531 (4 mv/mm/sec) and ird544m (42.52 mv/mm /sec) , make- m/s ird mechanalysis limited ird8800 (8800) , m88900 (88900) - speed module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 v dc sku-m88900-dc input- accelerometer and/or velometer outputs-4-20 ma dc output proportional to full scale vibration , technical specification attached in pdf , make- ird mechanalysis limited ird8800 (8800) , m88600 (88600) - eccentricity module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 vdc sku-m88600-dc input- accelerometer and/or velometer outputs-4-20 ma dc output proportional to full scale vibration , technical specification attached in pdf , make- ird mechanalysis limited 35 mm din rail mount industrial grade power supply , 480 w , product- rps480 , 24 v dc output , technical specification attached in pdf , make- ird mechanalysis limited cabinet 1500 x 600 x 600 in mm , ip32 sku - cabinet-1500-600-600-ip32 , installation , commissioning and calibration check of all supply sensor with unit at site .

Central Government/Public Sector

CTN :42116446

09 Oct, 2025 NA

Delhi - Delhi

Tender For power amplifier for secondary vibration calibration system model no. pa14-180

Central Government And Public Sector

CTN :42123508

21 Oct, 2025 46.28 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For supply of material and complete items of works for under the work of special repair to conservation and restoration of collapsed boundary walls of tomb of diwan saiyed mohammad khan majhera muzaffarnagar - items to be executed, u/s lime, surkhi, coarse sand, brick aggregate 20 mm-25 mm, belgiri, gum, gur, mud, modern bricks 2nd class, kail wood sleeper (3.05x 2.05x0.10 m), r.r. stone, c.r. stone, careful dismantling of roof in random rubble masonry over bhurji in lime concrete, executed manually to preserve adjacent architectural features and reusable stone material. the work shall be carried out under direction of engineer in- charge, ensuring minimal vibration and no damage to adjoining historic fabric., earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed,, providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working for the required duration as approved and removing it there after. the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin- charge. the elevational area of the scaffolding shall be measured for payment purpose. the payment will be made once irrespective of duration of scaffolding., surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift, layer by ramming and watering, lead up to 50 and for all

State Government

CTN :42116156

16 Oct, 2025 NA

Parli - Maharashtra

Tender For procurement of ht auxiliary vibration monitoring system spares installed at i&c-2, 250mw, tps, parli v.

Central Government/Public Sector

CTN :42095012

20 Oct, 2025 NA

Jorhat - Assam

Tender For supply of consumables for construction of hybrid energy device - mild steel sheet, 8ft x 4ft x 1.2 mm, mild steel angle rod, 1.5 inch x 20 ft, mild steel angle rod, 1 inch x 20 ft, mild steel welding rod, diameter: 3.15 mm, mild steel perforated sheet, 8ft x 4ft x 1.2 mm., stainless steel 304 sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 perforated sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 pipe, 1.5 inch dia, 1.5 inch dia, 1.2 mm, 20 ft, zinc alloy door handle lock, stainless steel 304 welding rod, 2.5 mm diameter, ceramic fibre blanket insulation, 24"x12"x1", ceramic fibre rope, 10 mm diameter, 30 m length, heat insulating gasket, 8 ft x 4 ft, 5mm thickness, heat resistant spray paint 225 ml, silicon pipe 1/2 inch inner dia, 10 m, high temperature silicon hose pipe, 2 inch inner dia, 12 feet, worm-drive tubing clamps.chrome steel, hose clamp, 1/2 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 1 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 2 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 3 inch dia, galvanized mild steel set of nut, bolt and washer, 8 mm diameter, 2 inch length, temperature sensor with digital display, k type, 0-1250 с, adruino uno r3 development board, rod heater, 8.2 mm diameter, 12 inch length, quartz furnace observation glass, temperature: 1200 °c, 10 em diameter, 5 mm thickness, copper tube 1/2 inch dia, 23 swg, copper electric wire 6 sq. mm, 90 m, copper electric wire 2.5 sq. mm, 90 m, mcb dp 32 a, electric socket 16 a, electric plug 16 a, combined box 20 a, anabond gasket maker 85 g, heavy load caster swivel diameter: 100 mm, galvanized iron pipe b class diameter: 1.5 inch, length: 40 ft, galvanized iron pipe b class diameter: 1/2 inch, length: 20, galvanized iron pipe b class diameter: 3/4 inch, length: 20 a, stainless steel 304 ball valve diameter: 1.5 inch, stainless steel 304 ball valve diameter: 3/4 inch, stainless steel 304 hall valve diameter: 1/2 inch, check valve, brass diameter: 1.5 inch, check valve, brass diameter: 3/4 inch, check valve, brass diameter: 1/2 inch, metal cutter grinder disc, pack of 10, grit number 220, diameter: 4 inch, grit material: aluminium oxide, metal cutter grinding wheel, pack of 5, grit number 4., diameter: 4 inch, grit material: aluminium oxide, flap disc, pack of 10, grit number 80, diameter: 4 inch, grit material: aluminium oxide, flexible heavy duty 3 layer pvc water pipe, diameter: % inch, length: 30 m, teflon tape for plumbing, pack of 10, 12 mm thick and 10 m length, heat resistant gloves, material: leather, size: 30.48 cm, nitrile disposable hand gloves, pack of 50 pieces, size: l, 150 microfarad capacitor, 230 v, 150 microfarad, 230 v, anti vibration rubber ribbed pads, pack of 4, 150mm x 150mm x 12mm, square pillow block bearing ucf204, 20 mm diameter, inner ball mounted pillow block insert bearing kp08, 8 mim bore, step down transformer, 220v ac to 12-0-12 v.1.5a, single strand wire, diameter 0.51mm,5m, moc3021 moc 3021 optocoupler, bta16-600b triac, 600v 16a, switch. sw-spst, in4007 diode, 100%via, bldc motor with compatible e-bike controller, 48v 900w 3300rpm, lithium-ion battery, a grade 3.2v 2000mah (5c), battery management system, li-ion 135 48v 20a, nickel strip, 0.2 mm thickness, 10 mm width, 5 m length, silicon wire, 12awg, insulation paper, 65mm, glue gun, 40 w, spot welding rod 5000 w, cpu fan 12 v dc, thermoelectric generator (teg), 150°c, module., configuration: sp1848-27145, tungsten rhenium thermocouple, minimum temperature reading: 0°c, maximum temperature reading: between 2300°c and 2871°c, max31856 instrumentation amplifier,, resolution: 0.0078125°c, supply voltage: 3.3v to 5v, arduino uno r3 with adapter cable, miniature circuit breaker fuse, d type, 32 a, power rocker switch, voltage rating: 24 vdc, current, rating: 14 ma, 19mm size red power symbol led s.s. momentary type, push button switch 5v-24v dc, potentiometers 100 kohm, potentiometers 1 m ohm, relay module-(ssr-2 channel), 2 chann

Central Government/Public Sector

CTN :41344928

03 Oct, 2025 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : supply of vibration monitoring system

Central Government/Public Sector

CTN :40492944

03 Oct, 2025 NA

Raipur - Chhattisgarh

Tender For bid to ras supply of w90418109141 fibre optic generator end winding vibration monitoring system , w90418109192 fibre optic sensor with conditioner & 6-meter integrated cable for generator end windin , w90418109206 fibre optic sensor with conditioner & 10-meter integrated cable for generator end windi , w90418109168 panel & accessories for generator end winding vibration monitoring system including la , w90418109176 junction box and accessories for fibre optic generator end winding vibration monitorin , w90418109133 commissioning of fibre optic generator end winding vibration monitoring system as per s

CTN :42072835

18 Oct, 2025 NA

Multi City - Multi State

Tender For supply of vibration controlled transient elastography system (fibroscan machine)

Central Government/Public Sector

CTN :42073688

21 Oct, 2025 NA

Multi City - Multi State

Tender For supply of continuous vibration monitoring system in hot rolling mill of sail ssp

Central Government/Public Sector

CTN :41802798

10 Oct, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of spares for vibration monitoring system : : - detail specifications as per technical catalogue for material code 310032348 , detail specifications as per technical catalogue for material code 300140121 , detail specifications as per technical catalogue for material code 310028202 , detail specifications as per technical catalogue for material code 310017853 , detail specifications as per technical catalogue for material code 310027446

Vibration System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors