Latest volumetric pump Tenders | Government volumetric pump Tenders

CTN :40955719

22 Jul, 2025 8.36 Lacs

Guntur - Andhra Pradesh

Tender For (summer action plan -2025) supply and delivery of leak arresting materials in 11,12,13,14,15 & 17 under ae - "manufacture, supply and delivery of 100mm rubber rings at site of work including, loading, unloading, transportation to site transit risk and package, and all types of labour charges. etc. complete as per ss 80mm rubber rings( cid joints class-5)", "manufacture, supply and delivery of cid joints confirming to is no.8794/1988 at site of work including, loading, unloading, transportation to site transit risk and package, and all types of labour charges. etc. complete as per ss100mm cid joints ", 150mm cid joints , "supply and delivery of pipe wrenches including cost and conveyance of all materials and all types of labour charges etc.complete as per ss12"" pipe wrench", 14" pipe wrench, 18" pipe wrench, supply and delivery of bolts and nuts including cost and conveyance of all materials and all types of labour charges etc.complete as per ss, "supply and delivery of dewatering pump 5.5 hp | petrol pump | 3 inch output and input | self primming | water discharge - 1100 l/min | 4 stroke | 2 year warranty dewatering pump", dewatering vibrating pump, "supply and delivery of hammers including all charges 10ponds hammers", 20ponds hammers, supply and delivery of hand grinding machine including all charges , supply and delivery of cc braker machine including all charges , supply and delivery of all sizes spaners , ring and flat wrenches including all charges , supply and delivery of all sizes l and keys including all charges , our rural iron farm care & gardening indian manvatti hoes l * b - 6 * 4.5 inch (with handle) small (paralu), supply and delivery of polugulu including all charges , "supply and delivery of ms flange rubber washers including taxes and conveyance etc., complete 110mm dia ms flange washers", 160mm dia ms flange washers, 200mm dia ms flange washers, 250mm dia ms flange washers, "supply and delivery of hdpe jack & cutting machine including cost and conveyance of all materials and all types of labour charges etc.complete as per ss110 to 160mm dia", 200 to 280mm dia, supply and delivery of hdpe exra frame including cost and conveyance of all materials and all types of labour charges etc.complete as per ss, supply and delivery of hdpe cutting exra frame 's' blads including cost and conveyance of all materials and all types of labour charges etc.complete as per ss, s& f 20 mm nominal bore gi pipe light grade properties & weight as per is 1239isi mark with gi fittings including the cost of pipe & its fittings & labour charges complete, s& f giunion 19.05 mm ist quality, s& f gi elbows 20 mm ist quality, s& f gi couplings 20 mm ist quality, "s& f gi nipples20mm dia gi 3"" nipples", 20mm dia gi 4" nipples, 20mm dia gi 12" nipples, s & f gunmetal (gm) ball valve with ss ball and ss spindle as per is - class - i, indian make heavy type - 20 mm nb size

CTN :40978884

12 Jul, 2025 NA

Multi City - Multi State

Tender For supply of m2 bof-5054271 rod bore cleaning brush , b3 1005- 001475 rod cleaning pistol no 2 mk 1 , w-7 4320- 000173 pump rotary hand driven fuel handling 50 , z1 misc-tadiran-2090-092-5200 h-250 u hand set , m1 4730-077881 lubricating nipple

Co-operative

CTN :40953947

10 Jul, 2025 NA

Bahraich - Uttar Pradesh

Tender For skscm/supply of wil make centrifugal machine spares/2025-26 - particulars, batch type c/f machines:, solonoide valve aluminium body as per sample, washer for above solonoide valve, upper plunger , lover plunger , spring for upper plunger, spring for lover plunger, nuematic valve flanged type, cammel haire belt 12 mm thick x 200 mm width, rubber buffer as per drg. no. 254/2000, hand operating newton d.c. valve, type hl for air control system size pss 150, one side 3 way and other side 2 way, one side 3 way and other side 3 way, spring for break system as per sample, s.s. sugar wash nozzle 3/8 with socket, rubber bucket for pug mill air cylinder size 102mm odx 22 mm bore, -do- but 136mm odx 22 mm bore, -do- but 50mm odx 10 mm bore, -do- but 80mm odx 12.5 mm bore, rubber tyre for s.d. machine 49 x 38 no. tcg 023-5414 as per drg. , air filter , rubber flexible wire braded hose pipe both end socket for air size 2/8 x mtr., s.s. hexagonal bolt & nut 12mm x 40mm, -do- 10mm x 50mm, -do- 8mm x 40mm, -do- 8mm x 50mm, for dc- 10 c/f machine:, spring loaded metal cage radial oilseal with single leap synthetic rubber, 180mmx150mm x15mm, 120mmx90mm x15mm, s.s. clamp for tightening of nickel screen l type as per sample, vibration rubber pad and stool mounting as per sample, s.s. guide ring for oil seal, oil pump gear set as per sample, neoprine rubber ring 5.5mm od, for n.k. 1300 c/f machine, vibration rubber pad as per drg no. 234/99, canvas belt x 6 x 9 ply, metallic grease pipe both side connector nut x mtr, grease cup as per sample, pressure grease gun capacity min 10 kg. 3/8 size complete at delivery., for sc 1100 kt machine:, vibration rubber pad as per sample/drg. no., newprine rubber round 3.5 mm od, -do- but 4.0 mm od, -do- but 5.0 mm od, -do- but 5.5 mm od, -do- but 6.0 mm od, square head s.s. bolt head size 20 x 20 mm, -do- but 20 x20 mm, en 8 stud bolt 5/8 x 2.1/12 both side thread and plane in middle , h.t. nut & bolt 16 x 190mm pinch 2 mm, s.s.washer 10 mm, -do- but 12 mm, rubber flexible hose pipe dunlop make with nut both end socket bsp thread x mtr., -do- but x 2mtr, nhec make:- complete brake assembly with cylinder for 1250 a centrifugal machine size 4 , spares for nhec make 1250a c/f, m/c, rubber bucket (double pad) for main plough up/down cylinder, rubber bucket (double pad) for in/out plough cylinder, rubber bucket (double pad) for hood cylinder, rubber seal for plough cylinder & hood cylinder id-25mm, od-40mm, thickness 8mm, rubber buffer, v seal for bearing sleeve, max flow:- repair seal kit for actuator size 12 , delval make repair seal kit for actuator size 85mm, o ring for main plough cylinder (up / down), o- ring for plough cylinder (in/out), o ring for hood cylinder, o- ring for brake cylinder, spares seal kit for chute cylinder 1 , teflon rod, dia 40mm length 300mm, copper pipe (10mm), ferul 10mm, kushako make, single acting pneumatic control valve for water size 1 , o-ring for single acting pneumatic control valve size 1 , spares for bakau wolf make 38 x 49 a c/f m/c (batch type centrifugal machine), syrup sepreater electric valve (1/4 ) flow tech make bsp x 4 way x 5 pad, ceil type, 230 v a/c single coil spring return solonoid valve, s.s. nozzle with socket for sugar wash (1/4 ), rubber bucket for brake cylinder (100 mm)

CTN :40566700

08 Jul, 2025 NA

Darjeeling - West Bengal

Tender For bid to ras bid to ras corrigendum : tender for supply of digital clamp meter (600 amp , ) , digital battery tester 13ct 700 , hydro meter , battery pole die +ve , -ve , alternator test bench , 1/4 inch square drive matrix socket set(46 pcs) , multimeter 600v (ac/dc) , refracto meter for def checking 6 in 1 function , alternator regulator tester (vegas) v 414 , safety goggles , torx key set -kth95 (9nos) , distilled water plant (aqua works (3000 watts (5 ltr /hr) , lathe carbide inserts cutting tool for machine steel parts(tnmg 331- maus) , insert cutting tool holder , magnise cnc tools holder(6/7/8/10/12mm lathe boring bar set ccmt carbide insert) , cnc lathe turning tools holder mgehr 1212-2 12x100mm boring bar 10pcs mgmn 200-g carbide inserts high hardness cutter dz10 , cobalt step drill bit spiral size 3mm to 25mm , hss drill bit 1 mm to 6mm 10pcs set , carbide threding inserts gbj-10 pcs 16 erag 60 , carbide threding inserts gbj-10 pcs 16 irag 60 3/8 inch , insert holder(16er ag60 , 16 irag 60 gold) , tap & die (8x1.25mm) , tap & die (10x1.5mm) , tap & die (12x1.5mm) , tap & die (14x1.5mm) , tap & die (16x1.5mm) , tap & die( 18x1.5mm) , tap & die (20x1.5mm) , tap & die (22x2.5mm) , tap & die a nf 1/4 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , 5/16 inch , tap & die bsp 5/16 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , steel rule 24 inch , reamer (adjustable) size- 22mm to 28mm , reamer (adjustable) size- 28mm to 35mm , reamer (adjustable) size- 35mm to 40mm , reamer (adjustable) size- 38mm to 45mm , straight shank drill bit 10.5 , 12 , 12.5 , 14 , 16 , tapper shank drill bit 16mm , 17.5mm , 18mm , 19mm , 20mm , 22mm , 24mm , 32mm , 45mm , marking block magnetic base with dial gauge (for lathe machine) , hss cutting tool size 1/4x100mm , 3/8x100mm , 1/2x100mm , niddle grinder 600w , drill sleeve 1-2 size , drill sleeve 1-2 size , drill sleeve 3-4 size , cutting disc 1.5x100mm , grinding disc 4x100mm , painting brush 2 inch , 4 inch , helmet mask , writing brush , pilot spray gun (cup type) 1 ltr capacity , nozzle tip cleaner (gas cutting nozzle) , spark lighter , angle grinder light duty 600w , anvil heavy duty (akt 25) , hand drill machine heavy duty 750w (size 1 to 30mm) , bench grinder , criclip plier (in side) , criclip plier (out side) , nose plier 10 inch , socket heavy duty 34 mm , socket heavy duty 55 mm , socket heavy duty 60mm , socket heavy duty 65 mm , socket heavy duty 70mm , socket heavy duty 80mm , injector opening box spanner 24 mm , injector opening box spanner 27 mm , allen key set (in inch) , allen key set (mm) , micro mete 0 to 25mm , micro mete 26 to 50 mm , micro mete 51 to 75 mm , micro mete 76 to 100 mm , dial gauge set for inner bore dia checking 02 mm to 200 mm , hyd pressure gauge test kit 100 to 600 bar , diesel engine compression pressure gauge test kit , mechanical jack 30 inch , pipe wrench 12 inch , fip high pressure line removing/fitting spanner 17 no & 19 no , fip opening ring spanner 14x15 & 12x13 , pre stroke tool for all inline/rotary diesel engine , injector testing pipe for fip test bench (600x6x2) , dropping tube for pump testing , fip test bench mini compressor for testing of pressure boost portable , fip gear removal tool for engine , c type ring spanner 10x11mm & 12x13mm , scissors 12 inch , claw hammer 200 gms , hammer 1/2 kg , hammer 1 kg , hammer 5 kg , chisel 6 inch-9 inch , center punch 4mm x 4 inch , adjustable oil filter wrench , light duty socket set , havy duty socket set , single end spanner 17 , 19 for fitting / removing of injecter pipe , hand press machine 50 ton capacity , bench vice 8 inch heavy duty , light duty drill machine , light duty hand grinder , nose plier 12 inch , electric planner 550w , hand drill machine 800w , electric rotary hammer machine 720w

CTN :40581457

05 Jul, 2025 NA

Darjeeling - West Bengal

Tender For bid to ras corrigendum : supply of atv repair - rear shock type 943 , left hand double bre brake ca , right hand double bore brake c , rr lft hand dual bore brake ca , rear right hand brake calipper , master cylinder brake , rod end 10mm 1 oblique 2 200lh 42 deg , spark plug type 6 , wire spark plug mag 90 deg , wire sparkplug pto 90 deg , coil efi , fuel injector type 1687 , crankshaft assembly tyoe 1774 , electronic throttle pedal , transimission speed sensor , battery hd agm sealed hd option , voltage regulator , clutch cover kit type 1769 , tire fr26x9r12pxtgenuine part , tire rr26x11r12pxtgenuine part , basic drive clutch asssembly type 1825 , fuse 10 amp , fuse park 20 amp 10 , main fuse 30 amp , relay spst series 303 sealed , seal type 374 , viton triple lip seal 40x70 , front disc brake type 217 , rear brake disc 8 point 625 in , rear shock type 938 , tube stabilizer rear matte blk , k-asm pad brake db 1375 , brake caliper asm left 1 point5 red , master cylinder brake , line, brake, front left 22 point 25 inch , line brk fr 36 90b 85jj , front disc brake , rear brake disc 8 point 625 in , steering gear box assy type 1906 , sparkplug wire type 1091 , ignition coil , kit-fuel pump type 2180 , crankshaft kit type 1850 , electroniic throttle pedal , elec throttle control throttle , gear position switch pin , transmission speed sensor , 14ah dry battery without acid , fuse 5 amp , fuse park 20 amp , relay spst series 303 sealed , relay solid state 9a , regulator 3 ah 50 a series hispd , 1 cylinder starter , asm drive clutch basic bearing , 1 point 5 in brake pad kit assy bid number/ & ( * ) : gem/2025/b/6302135 dated/ + : 03-06-2025 bid document/ 3 3 1 / 40

State Government

CTN :40939435

15 Jul, 2025 4.89 Lacs

Jummu - Jammu And Kashmir

Tender For as per boq - drilling of gravel packed bore hole of 250mm diameter and lowering of liner assembly consisting of blind and strainer pipes of 125mm dia. upto 90 mtr by using direct/ rotary / dual rotary method including installation of mark-ii hand pump and construction of platform as per unicef norms / as per site conditions, providing of 125 mm dia. m.s. casing pipe. the 125mm dia. m.s. casing pipe isi marked should have thickness of 5.4mm conforming to as per is 4270 / 2001 medium class (part-i) 2004 (heavy c class) electric resistance welded beveled ended inside beed free pipes. all pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. there should be no circumferential weld. the pipe from inside should be beed free having smooth finish. each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with is 4270/2001 with latest amendments. all the physical and chemical properties of pipe including tensile strength should be in accordance with is 4270/2001 with latest amendments., providing of pea shaped gravel as per is-4097 of 1967 with latest amendments for gravel packing of hand pump, shrouding during lowering of liner assembly, cost of slotting of ms pipe 125 mm dia ( to be charged as per actual), development of bore hole by air compressor of adequate capacity to give clear water free from sand and impurities, providing, fitting, installation, testing and commissioning of submersible pump set (reputed make) of suitable parameters depending upon the depth and discharge of the bore hole. the job includes erection of tripod stand and fixing of chain pulley block. then lowering of submersible pump set in to the bore hole by way of providing and lowering of 32 mm dia. hdpe pipe, submersible cable with fixtures such as rope, clamp, nuts, bolts & washers. fabrication and fitting of well cap. providing, fitting and installation of single-phase starter cum controller panel in sheet enclosure outdoor type conforming to is standard. providing and laying of 3 core submersible cable and 2-core pvc insulated copper conductor of suitable capacity as service line required from lt pole to starter panel of reputed make and fixing of lt control panel on wall by using wall mount fastners. making of electrical connections with the starter panel, service line and submersible pump set after properly thimbling and testing and commissioning thereof. the job includes the cost of material and labour charges. complete job.

State Government

CTN :40941208

08 Jul, 2025 NA

Chandrapur - Maharashtra

Tender For material required gp kanpa tah nagbhid dist chandrapur - 80 mm. metal white-(hand broken metal) with royalty, 40 mm metal white- (hand broken metal) with royalty, 20 mm, , , , , 16 mm, 81 mm. metal white-(hand broken metal) with royalty, khila, , paver block, , , , steel hollow door frame, c.r.c sheet work, ms (grill work), vindow, tractar bhada, saddle, , ms (grill work), vindow, tractar bhada, saddle, , steel, , ferud, birla white, , , gi pipe, tank connector, rope waterproof, ms tank structure, gi tank structure, ms angle, j bolt, ms pipe, gi sheet, led light 14 watt, led light 12 watt, led light 80 watt, led light 100 watt, gi barbed wire, rcc modern bench (3 sheet), solar lugs, d c fuss, distic watar, m.s. pipe 1.5x1.5, m.s. plat, solar pannel, rcc pipe 600 mm, rcc pipe 450 mm, rcc pipe 300 mm, pvc pipe 150 mm, mat finish stainless steel (302 grade), inwell bore driling, battery lithium, led light 24 watt, semi integrated solar light, brekar, ro 12 ltr aqua, ro 25 ltr aqua, m.s. pipe 2x2, m.s. pipe 3x3, m.s. pipe 4x4, m.s. pipe 1x1, rcc pipe 900 mm, rcc pipe 800 mm, solar panel connector, dc wire, 75 wp spv module, ms powder coated battery box, ac wire, solar pump controller 1 hp, nipples, hdp pipe, gi l socket, cotter pin, inwell bore pipe, dustbin, profile sheet, g.i. sheet, jsb, jcb, murum/80mm/40mm metal compaction, , needle tyap, 2 nos, profile sheet screw, chain line fencing, putty, oil paint, oil bond destember, water proof cement paint, praymar dimond cut kota stone 2x2, style verified 2x2, ceramic tiles wall mattfinish ceramic tiles 30cmx30cm, chequered tiles 30cmx30cm, cement chechekr styles, sintex, nal toti, 15 mm walve, 25 mm walve, 32 mm walve, cpvc pipe 15mm, cpvc pipe 15mm, cpvc pipe 20mm, cpvc pipe 50mm, cpvc elbow 15mm, cpvc elbow 20mm, pvc pipe 90 mm, pvc pipe 110 mm, batching and mixing plant @75 cum, flush door, sink, kadppa, off grid inverter solar, cpvc t 25 mm, cpvc t 32 mm, cpvc t 40 mm, 32 mm pvc pipe, pvc pipe 63 mm, stone dust, 10-12 mm, 80 mm, 40 mm, cpvc 25 mm, cpvc t 20 mm, 12 mm, 10 mm, 08 mm, solar street light dc 14 w led, green mat, 16 mm nutbolt, ro 50 ltr aqua, gi high mast pole, granute stone, solar pump 1 hp, water tanker 5000 lt, cpvc pipe 25 mm, cpvc pipe 32 mm, cpvc pipe 40 mm, , murga, , , , acrylic polymer modified liquid, , cpvc 15 mm , cpvc 20 mm, cpvc 25 mm, cpvc 32 mm, cpvc 40 mm, cpvc 15 mm t

CTN :39038232

18 Jul, 2025 13.18 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 25) , outside micrometer (25 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling a

CTN :39038241

18 Jul, 2025 10.88 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, machine tools & equipment foran international standard itotin mechanic diesel engine (md) tradeat iti bardoli, gujarat, india (package 3: mechanic diesel - files assorted sizes and types including safe edge file(20nos), flat file, second cut, flat file, bastard, grease gun, grease gun heavy duty trolley type, growler, hacksaw frame, hammer ball peen, hammer chipping, hammer copper with handle, hammer mallet, hammer plastic, hand operated crimping tool, hand vice, hollow punch set of seven pieces, insulated screwdriver, insulated screwdriver, left cut snips, magnifying glass, oilcan, philips screwdriver set of 5pieces, pipe cutting tool, pipe flaring tool, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, engine wire harness connected complete with electrical equipment, diesel fuel quality test equipment set, training setup for adas systems, 4-wheel alignment set & hoist with advanced driver assistance systems (adas), training system for sensors in motor vehicles, training system for the basics of pulse generation and ignition in vehicles, training system: common rail diesel injection system, batterycharger, car jet washer with standard accessories, chain pulley block capacity with tripod stand, compression testing gauge suitable for diesel engine with standard accessories, connecting rod alignment fixture, cylinder liner-dry& wet liner, press fit & slide fit liner, different type of engine bearing model, different type of piston model, fuel feed pump for diesel, fuel injection pump (diesel)inline, fuel injection pump dismantling toolkit /universal vice, fuel injection pump ve pump/ distributor fuel rotary pump (dpc) pumps, glow plug tester, injectormulti hole type, pintle type, injector cleaning unit, injector testing set (hand tester), oil pump for dismantling and assembling., piston ring compressor, piston ring expander and remover., piston ring groove cleaner., radiator cut section-crossflow, radiator cut section-downflow, radiator pressure cap, tandem master cylinder with booster, turbo charger cut sectional view, water pump ford is mantling and assembling, workbench with bench vice and storing drawers, arbor press hand operated 2-ton capacity, drilling machine bench to drill, dual magnetization yoke, grinding machine pedestal (general purpose), hydraulic jack, pipe bending machine (hydraulic type), pneumatic rivet gun with standard accessories, tin smiths bench folder, trolley type portable air compressor, special tools and equipment, hydraulic vertical honing machine for engine cylinder and brake bore, pneumatic valve seat grinder and lapping kit, intercooler cut model assembly with air filter & housing assembly diesel engine, work benches with bench vices and storage draws to demonstrate machines, belt tensioner gauge, granite surface plate with stand and cover, marking out table, multi scan tool, spring tension tester, ammeter dc with external shunt, cylinder bore gauge, dc ohmmeter, depth micrometer, dial gauge, multimeter digital, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, sheet metal gauge, straight edge gauge (2ft.), straight edge gauge (4ft.), surface gauge with dial test indicator plunger type, tachometer (counting type), telescope gauge, temperature gauge with sensor, thermostat, timing lighter, tyre pressure gauge with holding nipple, vacuum gauge, vernier calliper, wire gauge(metric), hydrometer, engineers stethoscope, drill twist (various sizes), hand reamers adjustable, drill twist(assorted), set of stock and dies with die stock-metric, taps and dies complete sets(5types), steel rule, caliper inside with spring, caliper outside with spring, dividers with spring, engineers square, feeler gauge 20blades (metric), hand shear universal, bench lever shears, air blow gun with standard accessories, air ratchet with standard accessories, air impact wrench with standard accessories, angle

State Government

CTN :40799022

02 Jul, 2025 NA

Lahul And Spiti - Himachal Pradesh

Tender For energization of bore well /hand pump near resum gompa lossar in gp lossar in spiti valley distt.l&s(hp)(sh:-s/e installation of submersible pumping set =1no)

Volumetric Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

State Government

State Government

State Government