Get complete information related to latest Wagon Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Wagon Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Wagon Scrap Tenders.
Tender For auction sale of rolling stock - wagons- scrap cond. unserviceable, over/under aged, accident involve derailed bg 8 wheeler wagons without rc items nos.1] ncr 21130750535 bosthsm1 2] wcr 19160426117 bost 3] secr 21141126992 bosthsm1 4] secr 21141231542 bosthsm2 5] ser 21071157783 bosthsm2 6] scr 21091580820 bosthsm1 7] secr 21141129306 bosthsm2 8] secr 21141072763 bosths 9] swr 94151364937 brn 22.9m1 10] ser 55070013740 brna 11] ncr 56130870990 brnahs, total weight of wagons 137.447 mt approx.,[ms-123 mt approx., cast iron ferritic alloy steel [irsm44]-10.847 mt approx.., corten steel [irsm41]-3.6 mt approx.,]. ds-8 nos 013419-25-57258, 57259, 57260, 57261, 57262, 57263, 57265, 57257, 57267, 57268, 57269 dt: 12.02.2026. loc. lying beside the railway track near rgpm yard at km 282/32-38, 33-37. delivery by number basis. pl no. 98110159 hsn code 72042910. available under sse cnw rdm, state- tg. note: - [1] free delivery period of 80 days is approved by cmm/t vide note no.6 dt.2/06/2026 in e-file no.559446.2]purchasers are requested to see the condition of the wagons, cutting spot, delivery spot before bidding in all aspects.[3] as some wagons are placed in private land, purchaser maintain and manage harmonious relation with land owners and surrounding crop owners, custodian to coordinate accordingly.[4] the weights, quantities and chemical composition of material were taken into consideration as advised by the custodian in the ds-8.[5] wagon no. ncr 21130750535 bosthsm1 and secr 21141231542 bosthsm2 are fully deformed during derailment.[6] wagon no. ncr 56130870990 brnahs is broken into two pieces. [7] for wagons placed at 282/32-38, 282/33-37, purchasers to ensure cutting and loading as suitable. [8] purchasers have to ensure themselves transportation of the cut-up parts of all wagons.[9] purchasers shall maintain minimum infringement clearance from track during cutting and delivery.[10] utmost care should be taken by the purchaser at the time of gas cutting to avoid the damage/accident near the cutting spot.[11] railway is not responsible for the shortage of the material and any other risks on the spot.[12] the purchaser has to place all rc items at one spot and hand them over to the custodian before affecting the delivery.13] the purchaser is strictly instructed to stack all the rc items at one location well away from the cut-up parts of the coaches and the custodian is advised to lift the same on the day of delivery affected. [before affecting/commencing/starting of the delivery itself]. 14] four wagons are in an uneven position on the small water canal. during cutting, the purchaser has to ensure the safety of his workers not to cause any untoward incidents.[15] purchasers have to ensure themselves transportation of the cut-up parts of all wagons. [16] approach roads may be slippery if it rains. [17] as per railway boards letter dt.23/12/2021, 3 days advance intimation is to be given to rpf for witnessing of deliveries. the same has been reiterated by dsc/rpf/sc vide letter dated 22/09/2025. firms are therefore requested to take this period into consideration while uploading their requests for delivery so that deliveries are completed on time, well within the fdp.18] cutting is permitted.
Tender For auction sale of others - miscellaneous coach released material mixed condition i.e industrial waste consisting of- (1) decolite released from floors of coaches. (2) pieces of porcelain wash basin, commode etc., broken pieces of plain and colour glass released from coaches with or without non ferrous/ferrous attachment, if any. (3) old l p sheet (decolum) of irregular sizes including pop rivet, seat/berth no. plates, pieces of limpet sheet, off-cuts of broken unserviceable lp sheet, unusable timber/plywood/wood scrap, broken pieces of compreg, plywood, broken slates, pieces of berth/shutter panel etc. released from coaches. (4) unserviceable/perished rubber items like-window sealing rubber, gas rubber hose pipes, shutter felts, rubber released from coaches, unserviceable pieces of foam, rexene and recron. (5) floor sweeping consisting of sand, mud, saw dust, scrap paper, coach rust ashes, rusty nails, nut-bolts, washers, small pieces of rusted mouldings, and pieces of ss moulding aluminium rivets etc, which cannot be segregated with reasonable effort, will be allowed in small quantity. (6) released unserviceable plastic spool containing end pieces of filler wire, wire rope, pieces of thermocol, unserviceable electrical switches with pieces of electrical cable, minor attachments, if any which cannot be segregated with reasonable efforts, plastic bend pipes and released air filter of rmpu. (7) released packing material (rubber and wooden) polythene bags, unusable gunny bags, card board, paper, puttah, gatta, old/teared hand gloves, aprons, etc. (8) broken welding hand screen, helmet, face shield, broken pieces of battery container, bakelite, plastic/pvc sheet. broken pieces of battery flutes, flexible pipes. lot no. crws/bpl/mech/coach furn/26-27/03 date: 24-04-2026 note: (1) ferrous and non ferrous metallic items except minor attachments with the material of lot will not be delivered. (2) all materials should be lifted with road level in sweeping condition. (3) delivery will be made on actual measurement. (4) ferrous & non-ferrous items will be returned by purchaser to stockholder during delivery, if any found in the lot. (5) hazard waste item i.e. paint peeling, paint-dust will not be delivered. (6) if any another material found except description of material will be not delivered and returned to stock holder. (7) sorting/segregation of material is not allowed.
Tender For auction sale of others - miscellaneous coach released material mixed condition i.e industrial waste consisting of- (1) decolite released from floors of coaches. (2) pieces of porcelain wash basin, commode etc., broken pieces of plain and colour glass released from coaches with or without non ferrous/ferrous attachment, if any. (3) old l p sheet (decolum) of irregular sizes including pop rivet, seat/berth no. plates, pieces of limpet sheet, off-cuts of broken unserviceable lp sheet, unusable timber/plywood/wood scrap, broken pieces of compreg, plywood, broken slates, pieces of berth/shutter panel etc. released from coaches. (4) unserviceable/perished rubber items like-window sealing rubber, gas rubber hose pipes, shutter felts, rubber released from coaches, unserviceable pieces of foam, rexene and recron. (5) floor sweeping consisting of sand, mud, saw dust, scrap paper, coach rust ashes, rusty nails, nut-bolts, washers, small pieces of rusted mouldings, and pieces of ss moulding aluminium rivets etc, which cannot be segregated with reasonable effort, will be allowed in small quantity. (6) released unserviceable plastic spool containing end pieces of filler wire, wire rope, pieces of thermocol, unserviceable electrical switches with pieces of electrical cable, minor attachments, if any which cannot be segregated with reasonable efforts, plastic bend pipes and released air filter of rmpu. (7) released packing material (rubber and wooden) polythene bags, unusable gunny bags, card board, paper, puttah, gatta, old/teared hand gloves, aprons, etc. (8) broken welding hand screen, helmet, face shield, broken pieces of battery container, bakelite, plastic/pvc sheet. broken pieces of battery flutes, flexible pipes. lot no. crws/bpl/mech/coach furn/26-27/04 date: 24-04-2026 note: (1) ferrous and non ferrous metallic items except minor attachments with the material of lot will not be delivered. (2) all materials should be lifted with road level in sweeping condition. (3) delivery will be made on actual measurement. (4) ferrous & non-ferrous items will be returned by purchaser to stockholder during delivery, if any found in the lot. (5) hazard waste item i.e. paint peeling, paint-dust will not be delivered. (6) if any another material found except description of material will be not delivered and returned to stock holder. (7) sorting/segregation of material is not allowed.
Tender For stage contract for supply of workshop/line material as and when required during financial year 2026-27 or till next contract gets finalised - electrical store/workshop items/: as per is standards and kpdcl approved vendors only wherever applicable, bush rods 12mm(lt) of standard make, bush rods 19mm(lt) of standard make, bush rods 25mm(lt) of standard make, bush rods 30mm(lt) of standard make, ht bush for dts of standard make(33/11kv as per requirement and relevant is), lt bush set for 250kva dt of standard make, lt bush set for 63kva dt of standard make, lt bush set for 100kva of standard make, aluminum thimbles 95sqmm of standard make, aluminum thimbles 120sqmm of standard make, aluminum thimbles 185sqmm of standard make, aluminum thimbles 240sqmm of standard make, aluminum thimbles 300sqmm of standard make, soldress clamp for 630kva, soldress clamp for 400kva of standard make, soldress clamp for 250kva of standard make, soldress clamp for 100kva & 63kva, gi channel/angle/flat/clamps of sizes (as per requirement), gi v cross-arm with top bracket including clamp(2 nos), 11 kv gapless surge arrestor,9 kv ,10 ka ,la with polymer housing, stn. type, 11kv go, ab switch 3-phase, 3-pole, 200 amp, vertical type, 11 kv horn gap fuse set 3 phase 200a, 11 kv heavy duty link set (polymer) line type with 6mm copper blade and 02 no. 8ft. gi channel, clamps and nuts and bolts, 11 kv pin insulators (polymer/porcelain) with pins(5kn), 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, lt shackle with mukhi clamps including gi nuts & bolts, gi nuts & bolts of sizes with full thread, manilla rope, gi wire 8 swg, suspension/tension clamp with eye hook as per kpdcl standards, insulating piercing connector (10-95sqmm), straight through cable jointing kit for 35/50sqmm ltab, straight through cable jointing kit for 75/95/120sqmm ltab, heat shrinkable outdoor cable termination kit, 50sqmm lt ab cable (3x50+1x16+1x35) sqmm xlpe (1.1kv, 3+1c, al), 35 mm ab (ht) cable (3x35+1x35 mm ) xlpe, dpc aluminium of sizes 13/14/16/18swg of standard make, super enamelled(se) of sizes 13/14/16/18/21swg of standard make, lathoride paper 10 mil of standard make, exchange of 1kg fresh al dpc by scrap dpc, exchanege of 1 kg fresh bush rods by scrap bush rods, lathoride paper 20 mil of standard make, ht paper 3 mil of standard make, hard card board 1/1.5/2/3mm of standard make, fiber tubes of standard make, cotton tape/ nawar of standard make, cork washers (32x12)5mm, cork washers (50x28)5mm, cork washers (110x74)5mm, cork washers (45x20)5mm, cork washers (60x32)5mm, cork washers (70x45)5mm, cork washers (90x50)5mm, cork sheets(24x36) 3 mm, cork sheets(24x36) 4mm, cork sheets(24x36) 5mm, cork strip(40x3) mm, cork strip(40x5) mm, oil seals for 250kva of standard make, oil seals for 100kva & 63kva of standard make, m seal, cotton tap 1" size (length 35 meter), nawar tap 1 size 35 meter long, tape roll pvc, old saree/doti cloth, insulating gum of standard make, aluminum strip of sizes (3/6, 3/7, 4/8, 4/10 mm etc ) of standard make, rubberized cork sheet 4mm thick, 2 feet *3 feet, rubberized cork sheet 3mm thick, 2 feet *3 feet, ht brown paper 3.0/2.5 mil, packing sheet (1mm)press card board 1/2/3mm, synthetic enamel paint grey colour, varnish dr.beck/empire, glass wool sleeves of sizes, fevicol, backlite tubes 1/2 inch,(1mtr length), packing gutties, electrical grade kraft paper,4mil, rubber washers ( m-12 ht oil seal),, rubber washers ( m-12 lt oil seal),, rubber washers ( m-16 lt oil seal),, rubber washers ( m-20 lt oil seal),, rubber washers ( m-25 lt oil seal),, rubber washers ( m-30 lt oil seal),, fiber glass sleeves 2mm, fiber glass sleeves 3mm, fiber glass sleeves 4mm, fiber glass sleeves 5mm, fiber glass sleeves 6mm, fiber glass sleeves 8mm, fiber glass sleeves 10mm, fiber glass sleeves 12mm, fiber glass sleeves 15mm, oxygen cylinder for welding with water c
Tender For auction sale of others - scrap released industrial waste products unserviceable for railway use 1 coal /coke ashes debris steam coal and hard coke dust scrap pieces of u/s fire bricks 2 broken piece of plain and color glass mirror porcelain washbasin commode crockery item etc.3 u/s cotton rag canvas released from coaches old unusable hand gloves aprons etc 4 u/s rubber items window sealing rubber foam pieces gas rubber hose pipes shutter felts damaged & condemned rubber hose and pvc pipe pieces damaged torn vacuum hose pipes without universal couplings small broken pieces of rubber released from roof of the coaches & glass wool 5 unusable timber plywood wooden scrap pieces of compreg ply broken slates pieces of berth shutter panel etc scrap broken pieces of released packing wood timber jolly board condemned wooden seats without rexene & ferrous fittings wood shavings mixed with sand & rubbish 6 released packing material rubber fibre wooden polythene bags gunny bags card board paper puttah gatta thermocole etc. broken and u/s pieces of asbestos cement sheets released from shops 7 unserviceable old lp sheet including pop rivet seat berth number plate unuseable off cuts of new lp sheet unusable pieces of limpet /nftc sheet 8 floor sweeping consisting of sand mud mud muck scrap paper shrubs tree branches including dried grass & leaves coach-rust rusty nails screws and washers u/s aluminum rivets mixed with sweepings and ashes from burn material mud and muck includes unserviceable pieces of stones boulders broken concrete foundations and u/s pieces of other bricks oily greasy rags oily dirt and mud mixed with rubbish heaps excluding sludge oil 9 unserviceable off-cuts of fresh rexene pvc sheet coir recron foam released and unserviceable rexene pvc sheet coir recron foam 10 unserviceable frp products like window shutters louvers inlay lavatory wall protectors wash basin fish tails banjo shutter front cover or axle box mouldings 11 u/s nylon plastic bushes nylon wire rope and other nylon items broken welding hand screen helmet face shield 12 u/s bakelite bakelite box with screws broken and condermned bakelite cover of tumber switch and fuse without non-ferrous fitting mcb with embedded material except aluminum and copper, ceramic pieces plastic pvc sheet and sleeves broken pieces of electric switches battery floats flexible pipes unserviceable broken tube lights and bulbs fuse without non-ferrous fittings broken damaged pieces of insulating material 13 engineering garbage not required by iow and generated inside workshop like tree branches loose earth etc 14 following unserviceable items released from poh activities -bp and fp houses with end ferrous parts, unserviceable buffer pads and draft pads, frp main door embedded with ferrous window bars handle latch etc frp window shutters with embedded ferrous material, unserviceable lavatory door vestibule door fiied with latch/handle and ferrous mouldings etc, hdpe commode chute with ferrous bracket and supporting ring,plastic spool with end pieces of filler wire. 15 ferrous pieces mixed with rubbish weighing not more than 500gms 16 any item of industrial waste not covered above as advised in writing by the site engineer in charge. as is where is basis. loading by purchase. location of material : site c i.e. 100 kld etp plant/lower parel workshop/ maharashtra. custodian :sse/ys/pl(total approximate weight 50 mt.) note 1)the above items are expected generation of various items in the workshop. the railway does not guarantee availability of all types of industrial waste at all times in the same proportion some item may be even zero 2)the railway will not accept any claim for availability of any specific items or their quantities 3)no material other than above shall be permitted to be lifted 4)mode of delivery will be in metric tonne. no sorting & pick and choose of material will be allowed.
Tender For auction sale of others - during shed cleaning, the scrap/waste generated and mixed in garbage includes dust, dirt, daily cleaning waste removed from pits, champion sheet pieces, cotton waste, broken iron pieces along with ferrous material, old nails, broken electrical wire pieces, rusted nuts-bolts and washers, and other rusted small-big loco and non-loco ferrous parts pieces. it also includes thermocol, polythene bags, cardboard boxes, broken putty pieces, small-big wooden covers/lids, broken cover body filters and relay covers, various loco parts of equipment, broken unusable scrap/rubber items, gaskets, flexible rubber hose pieces along with ferrous fittings, engine torn clothes, unusable leather gloves, broken glass pieces mixed in scrap. pvc scrap, insulated material pieces, small welding electrode pieces, empty rdp tins, various minor copper/bronze parts generated during daily cleaning are also mixed in the scrap. broken tarpaulin, broken plastic jars, acid containers/jars, small broken paint and chemical empty bucket/container pieces are also mixed in the scrap. broken and bent small containers along with ferrous and non-ferrous materials such as nuts-bolts etc. of various loco material parts are mixed in the scrap total lot qty- 300 cubic meter approx .sse ss 11 no et/trs cs industrial waste 06 01 dt 13.04.2026 note 1.delivery of lot by actual weighment in cubic meter 2. qty of lot has been assessed on approximate basis subject to any variation during by cubic meter . 3.lot to be sold as is where is basis. 3.if any other material except description is found while delivery, which is strictly restricted and it cannot be delivered. 4. the purchaser will be responsible for the safety of his labour and other staff in railway premises. 5.it is strictly advised to the bidder to see the lot and the loading point personally before bidding the lot in e-auction no claim will be entertained after sale of lot. 6.qty. of lot has been assessed on approximate basis subject to any +/-10% variation during delivery by actual weighment if any.
Tender For auction sale of others - miscellaneous coach released material mixed condition i.e industrial waste consisting of- (1) decolite released from floors of coaches. (2) pieces of porcelain wash basin, commode etc., broken pieces of plain and colour glass released from coaches with or without non ferrous/ferrous attachment, if any. (3) old l p sheet (decolum) of irregular sizes including pop rivet, seat/berth no. plates, pieces of limpet sheet, off-cuts of broken unserviceable lp sheet, unusable timber/plywood/wood scrap, broken pieces of compreg, plywood, broken slates, pieces of berth/shutter panel etc. released from coaches. (4) unserviceable/perished rubber items like-window sealing rubber, gas rubber hose pipes, shutter felts, rubber released from coaches, unserviceable pieces of foam, rexene and recron. (5) floor sweeping consisting of sand, mud, saw dust, scrap paper, coach rust ashes, rusty nails, nut-bolts, washers, small pieces of rusted mouldings, and pieces of ss moulding aluminium rivets etc, which cannot be segregated with reasonable effort, will be allowed in small quantity. (6) released unserviceable plastic spool containing end pieces of filler wire, wire rope, pieces of thermocol, unserviceable electrical switches with pieces of electrical cable, minor attachments, if any which cannot be segregated with reasonable efforts, plastic bend pipes and released air filter of rmpu. (7) released packing material (rubber and wooden) polythene bags, unusable gunny bags, card board, paper, puttah, gatta, old/teared hand gloves, aprons, etc. (8) broken welding hand screen, helmet, face shield, broken pieces of battery container, bakelite, plastic/pvc sheet. broken pieces of battery flutes, flexible pipes. lot no. crws/bpl/mech/coach furn/26-27/01 date: 01-04-2026 note: (1) ferrous and non ferrous metallic items except minor attachments with the material of lot will not be delivered. (2) all materials should be lifted with road level in sweeping condition. (3) delivery will be made on actual measurement. (4) ferrous & non-ferrous items will be returned by purchaser to stockholder during delivery, if any found in the lot. (5) hazard waste item i.e. paint peeling, paint-dust will not be delivered. (6) if any another material found except description of material will be not delivered and returned to stock holder. (7) sorting/segregation of material is not allowed.