Latest walling Tenders | Government walling Tenders

State Government

CTN :45309324

03 Jun, 2026 3.49 Lacs

Howrah - West Bengal

Tender For renovation with uc bulah pilling and drum sheet walling at maju bazar shitala mandir under uttar maju

CTN :45317986

04 Jun, 2026 3.96 Lacs

Silvassa - Gujarat

Tender For supply of wall support ladder , safety ladder , fall arrestor , safety harness belt , scaffolding , tools to work at height

CTN :45304567

08 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od b g.i pipe. seat rest pipe 42 mm od b class g.i pipe. handl

CTN :45305833

08 Jun, 2026 35.94 Lacs

Faridabad - Haryana

Tender For beautification works in including play equipment, open gym, plantation and repairing of boundary wall at brahampuri park saran village boosting park in ward no. 09 nit faridabad.(recall) - labour charge for making tee connection with existing line excavation, cutting jointing and making connection with existing line complete in all respect, supply and fixing of pvc tee 150x150x150mm dia., chain swing (2seater): 10 l x 6 w x 8 .5 h. horizontal frame and vertical legs is of m.s. pipe 2 x 12 gauge. it stays with m.s. pipe 1 x 12 gauge. swinging seats-2nos is of frp molded seat of 2mm thick fitted with m.s. pipe frame x 12 gauge which hang with m.s. chain 6mm thick duly plated with ball bearing and m.s. flat 6mm thick housing. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., sea saw (4seater): - 8 l x 5 .5w x 15 high. frame is of m.s. pipe 2 x 12 gauge. sitting planks is of m.s. pipe 2 x 12 gauge and its cantilever and handles is of m.s. pipe x 12 gauge. sitting seats 4 nos. is of molded frp material in 3mm thick with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and labor at site., bridge ladder: 10 l x 2 w x 6 h. horizontal ladder is of m.s. pipe 2 , andamp: vertical ladder is of same material of 12-gauge isi mark with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and amp: labor at site., merry-go-round (4-seater): 5 dia. main frame is of m.s. sq. pipe 2 x 2 x 14 g and having suitable handle andamp: foot-rest is of round pipe x 12 gauge. central pipe is of m.s. pipe 3 x 12 g with heavy duty shaft 50mm thick andamp: ball bearing assembly. it consists of 4no chair made of molded frp plastic. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., pvc reducer 150mm x 100mm.., frp dustbin (tilting type) of capacity 60 ltr. body is made of moulded fiberglass re-enforced plastic (non- halogen fire retardant resign) of 2mm thick having its lid with handle. it fitted with m.s. square pipe 1.25` x 1.25` x 14 gauge and m.s. flat 50 x 5mm, 30x 5mm base structure with epoxy primer interseal 670 hs and pu finish (interthane 990) paints. complete item with gst. transportation, installation with cc and labor at site., making connection with existing sewer main line, p/f of pvc 100mm dia bend., supply of pvc pipe 150 mm dia with isi mark 8kg.cm2 pressure, supply of good earth complete as per site requirement, p/f chest press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi-pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from roto-moulde. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f seated puller is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm and 25mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used, p/f sky walker is made from is-1239 b class

CTN :45301175

02 Jun, 2026 NA

Palamau - Jharkhand

Tender For supply of machine equipments furniture items in nagar panchayat chhattarpur - executive table made of pre-laminated board (minimum 25 mm top, 18 mm sides), size approx. 7 ft 3 ft or larger, with side storage unit (l-type), drawers with lock, modesty panel, edge banded, termite resistant., ergonomic design, cushioned seat (minimum 40 50 mm foam), hydraulic height adjustment (for revolving chairs), strong base with castor wheels, load capacity 100 kg., visitor chair with cushioned seat and back, strong metal/steel frame with powder-coated finish, ergonomic design, and load capacity 100 kg, suitable for office use.seat size approx. 18 20 inch width with proper back support, non-slip legs or base, durable upholstery (fabric/leatherette), with minimum 1-year warranty, engineered wood cabinet, minimum 4 5 shelves, lockable, size approx. 6 ft height 3 ft width, powder-coated/laminated finish., office backdrop panel made of acp with high-quality printed vinyl or uv print finish, mounted on wall with proper framework, suitable for office branding/display.size as per site requirement, with smooth finish, durable material, and provision for logo/text display.(led backlit option preferred, with concealed wiring), designation board made of acrylic sheet (minimum 5 mm thickness) with uv printed or vinyl lettering, mounted on office backdrop with spacers for raised effect.size approx. 18 inch 6 inch (1.5 ft 0.5 ft) or as per designation length, with smooth finish, durable printing, and proper alignment on backdrop., photo frame made of wooden frame with glass/acrylic front, high-resolution printed photograph, wall-mounted with proper hooks.size approx. 12 inch 18 inch, with durable finish and neat border suitable for office display., indoor ornamental plant in decorative pot, suitable for office environment, low maintenance, air-purifying variety (e.g., money plant, snake plant, or similar), with pot size approx. 6 8 inch diameter, placed on desk/table., office pen stand made of metal material, multi-compartment design, durable and suitable for desk use, with neat finish and standard size., intel core i5 (latest generation 13th or above), 8 gb ram, 512gb ssd (expandable), full hd (21.5 or above) led monitor, keyboard & mouse, pre-installed windows 11 pro and ms office 2021 / microsoft 365 (original licensed), suitable for heavy office/multitasking work, with minimum 3-year onsite warranty (preferred brands: hp, dell, lenovo), color ink tank multifunction printer with print, scan and copy functions, automatic duplex printing, minimum print speed 20 ipm (black) and 10 ipm (color), print resolution 600 1200 dpi, suitable for high-volume office use.should have adf (minimum 30 sheets), support a4/legal sizes, wi-fi, lan and usb connectivity, refillable ink tank system with low running cost, supplied with full ink set, installation, and minimum 1-year onsite warranty. (preferred brands: canon, brother, epson, hp), line-interactive ups with minimum 600 1 kva capacity, pure sine wave output, backup time minimum 15 20 minutes for one desktop system, with overload/short circuit protection and audible alarm.should include built-in battery, led indicators, and support for automatic voltage regulation (avr), with minimum 1-year warranty., height adjustable table-top desk with manual/gas spring lift, sturdy frame, suitable for sit-stand office use, modular workstation units made of pre-laminated engineered wood (minimum 18 mm thickness) with edge banding, sturdy metal frame, and cable management provision, suitable for regular office use.each workstation shall have minimum working size approx. 3.5 4 ft width 2 2.5 ft depth per user, with partition panels, smooth finish, complete fitting/fixing, installation, and commissioning., ergonomic office chair with cushioned seat and back (minimum 40 50 mm foam), mid-back design, breathable fabric/mesh upholstery, and strong metal frame with load capacity 100 kg.should have fixed armrests, stable base without w

CTN :45169297

06 Jun, 2026 NA

Guna - Madhya Pradesh

Tender For supply of computer assesories & computer & printer - name o itom, smps 450/ for desktop, compatible with standard atx cabinet, with power cable, smps 500w for desktop, compatible with standard atx cabinet, with power cable, ram 4gb /ddr4, compatible with existing system, ram 8gb ddr4, compatible with existing system, hard disk 1tb sata, 7200 rpm or higher, ssd /128gb/256gb/512gb sata/nvme for faster performance, motherboard atx/micro atx, compatible with intel i3/, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, motherboard atx/micro atx, compatible with intel i5or amd ryzen, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, motherboard atx/micro atx, compatible with inte i7 or amd ryzen, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, motherboard atx/micro atx, compatible with amd ryzen, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, cpu cooling fan with heat sink, intel/amd compatible, cmos battery cr2032 for motherboard, keyboard usb wired standard 104 keys/keyboard wirless+mouse, mouse usb optical/wirless mouse, lan cable cat per mtr, rj connector, toner cartridge compatiblehp series , +, ink cartridge (black/color) compatible with printer model, ink bottle 65 135 ml for ink tank printers (cmyk), fuser assembly for laser printer, complete unit, pickup roller for paper feeding mechanism, drum unit compatible with printer hp, drum unit compatible with mfp, printer logic board (formatter board), usb printer cable 1.5 3 meter, high-speed, desktop repair service including fault diagnosis and minor repair, os installation (windows/linux) with drivers and configuration, formatting & software installation, virus removal and optimization/anti virus, data backup / recovery, preventive maintenance (cleaning and check-up), technician visiting charges, printer repair service including troubleshooting, cartridge refilling (ink/toner), printer head cleaning, roller / fuser repair, printer installation & setup, amc (annual maintenance contract), technician visiting charges (printer), cctv bullet camera 2mp full hd, ip67, ir 30m, outdoor nos, cctv dome camera 2mp, ir 20m indoor nos, ip camera bullate/dome 2mp, ip camera bullate/dome 4mp/5mp, ip camera bullate/dome 5mp, cctv bullet camera 5mp hd, ir 40m nos, dvr 8 channel hd with remote monitoring, hdmi/vga, mobile viewing nos, nvr 8/channel for ip cameras with lan support nos, nvr /16 channel for ip cameras with lan support nos, nvr 32 channel for ip cameras with lan support nos, surveillance hdd 2tb, 24x7 recording support nos, poe network switch 8+2/4+2/+16+2, smps 12v 10a power supply with metal box nos, bnc connector for cctv connection nos, dc connector for camera power supply nos, coaxial cable rg59 with power cable copper meter, coaxial cable rg59 with power cable copper feet, lan cable cat6 for ip camera networking meter, lan cable cat6 for ip camera networking feet, pvc pipe 20mm for cable protection meter, junction box weatherproof for camera mounting nos, led monitor 22 inch hdmi/vga for cctv display nos, rack for dvr/nvr wall mount with lock nos, cctv installation including wiring, fixing, testing complete job, cctv configuration & testing job, amc cctv system yearly year, lcd projector basic, 3000 ansi lumens, xga or higher, hdmi/vga, 5000 hrs lamp life nos, lcd projector mid range, 3500-4000 ansi lumens, wxga/full hd, hdmi/usb/vga nos, lcd projector high end, 4000-5000 ansi lumens, full hd, hdmi/usb/lan, 8000 hrs lamp life nos, projection screen 6x4 or 7x5 feet, wall mount/manual nos, ceiling mount kit heavy duty adjustable nos, hdmi cable 10-15 meter high speed nos, vga cable 10-15 meter nos, audio speaker 20-40 watt for projector nos, wireless presenter / laser pointer nos, power extension board surge protected nos, projector installation including mounting, wiring, testing job, training & demonstr

CTN :45268390

29 May, 2026 7.28 Lacs

Pulwama - Jammu And Kashmir

Tender For repair of brick walling and other allied works at district development commissioner official residence at shopian

CTN :45244477

25 May, 2026 NA

Pondicherry - Pondicherry

Tender For providing and fixing of kitchen chimney gas poipeline connection and kitchen equipments for the canteen building inside the ptu campus under rusa fund - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

CTN :45282015

01 Jun, 2026 1.47 Crore

Imphal - Manipur

Tender For supply of a portable shelter , arrangement for transportation , steel structur , electricla items , external elect store , furniture items - shs 100 x 100x 4.0 mm thick. make: sail /tata / apollo / equivalent isi marked, shs 50 x 50x 2.00 mm thick. make: sail /tata / apollo / equivalent isi marked, rhs 100 x 50x 4.05 mm thick. make: sail /tata / apollo / equivalent isi marked, ms plate 20 swg /1 mm thick as in wall (outer body), ms plate 18 swg /1.22 mm thick as in roof (outer body), ms plate 26 swg /0.46 mm thick as in secondary outer body., 4 mm thick acp sheet (inner) (make alstone/eurobond/ aludecor/ alstrong), hybrid (poly-isocyanate) pir panel insulation shall be provided using 45 mm thick density of 48 kg/m³ with aluminum foil one side, hdf laminated wooden flooring 8 mm thick (make - action tesla/centurry/pergo/greenpanel/micasa), 19mm thick ply make: kitply / green ply / century ply, steel doors: one number of door of size 900mm x 1800mm with inside opening shall be provided with complete accessories., steel doors: one number of door of size 900mm x 2100mm with inside opening shall be provided with complete accessories., detachable ms steps: 1x ms steps of size 600 x 300 mm 6 tier of steps made up of ms angle of size 40mm x 40mm x4mm (wt not less than 4.20 kg/m) would be provided. reference drawing as directed and approved make: sail/tata/jindal, pop rivet 3m x ½”, pop rivet 4m x ½”, welding rod n. 10, primer paint, ir absorbent paint camouflage pattern, metal putty, rubber solution, hydraulic jack with rubber hoses and fittings, electrically operated winch assy, jack side support 2 ton, map boards 6' x 6' with all accessories, vps / projector system stand, canvas cover 30'x30', 3 kg fire extinguisher & fire ball, self screw 25x1, multi spectral camoflauge net, led concealed light 9’’ x 9”x 22 watt, make- havells/ bajaj/ crompton), entrance light (bucket light), ac starter with fittings and mcb, single core wire 2.5mm, single core wire 1.5mm, single core wire 1 mm, insulation tape, modular s/w with cover on/off 5/15, socket 5 amps 3 pin, socket 15 amps 3 pin, switch boards 10 “ x 10”, switch boards 6” x 6” & 6” x 3”, exhaust fan 300mm, work station/ partition, wall mounted fan 450mm, focus / spot light for mapboards, hdmi cable for projector, led screen (sonic view / equivalent) 65'" (164 cm) with modular stand 4k ultra hd (3840 x 2160) etc. make - samsung / sony, de-humidifier 1.5 ton with stablizer and complete fittings etc. make- voltas/ daikin/lg/blue star/ panasonic., electric connections. cables to be used should isi marked of make havells/ crompton greeves/ plaza , fire retardant material. 1.5 sqmm cable to be used in all light points and 2.5 sqmm cable to be used in power points. 18 watt & 11 watt leds of make: cromptongreaves/bajaj/havells/syska . shall be provided at all light points. all switches to be used should be of 6 amp modular type of havells/anchor /crompton greeves/ general electric. the fwg electric connections shall be provided for :-, (ii) power point of 5 pin15 amp socket and 8 nos switch combination of modular type all switch point will be modular type will be provided as approved of make crompton greave/bajaj/havells ., (iii) concealed conduits will be provided for cabling in the portable shelter set of pvc insulated cable 1.5/2.5 sqmm multistanded copper conductor single core 1100v, grade conforming to is 649/1990 of make havells/finolex/plaza, (iv) mcb dp 32amps conforming to is 8828-1996 make crompton greave/ bajaj/havells, (v) miniature circuit breaker (mcb) 6 amp to 32 amps (single pole) make : crompton reave/bajaj/havells., (vi) change over over 63 amps, 3 pole of make: crompton greave/bajaj/havells., cable jointing kit for 11kv (earthed) grade cable for straight through heat shrinkage type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminum conductor cable of size 16 sqmm to 35 sqmm, power backup (ups/ inverter system) capacity 3

CTN :45088063

25 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras officers recreation room co lounge ante room and dinning hall c c - bevarage counter with quartz stone on top, size 10x2.5 ft italian marble on front side and indirect lighting with provision of hanging wine glasses on top , glass frame background of size 12x8x1 ft with full glass and profile lighting on each vertical lap with provision of locking arrangement , modular cupboard of size 8x5 on both side of the bar counter with provision of profile lighting , bar chairs in round shape and with high back support customized design , dual tone 3 seater sofa arrangement customised design , dual tone 2 seater sofa arrangement customised design , italian top marble top centre table of size 4x2 ft with bottom duco finish , customised design wallpaper work on the wall for beautification of the entire attire for an area of 385 sqft , tv paneling with back frame of 18mm , artifacts on wall with mural design for officers recreation room , transparent fibre base flower pots with lighting option from inside of ht 24 with decorative , glass cabinet for keeping gifts and trophies of size 6x4x1.5 ft , customised design ceiling work with pvc and gypsum board in the corner , romand fabric design blinds with metal frame , toughened glass door of size 78x45 inch with wooden frame on 3 side , dual tone 5 seater sofa set with 1 italing marble baed teapoy , tv paneling with back frame of 18mm water proof marine grade plywood , customised design wallpaper work on the wall for beautification of the entire attire for an area of 120 sqft , artifacts on wall with mural design for co lounge , submarine art wall , customised design ceiling work with mixture of gypsum board and pvc material , romand fabric design blinds with metal frame of size 8 x 6 ft , toughened glass door of size 78 x 45 inch with wooden frame , wall paneling with hdhmr sheet with wooden frame on back side with cinc cutting design submarines , customised design pop moduling of size 4x3.5 ft , cabinets with loft with in the pillars of size 10x2 ft , submarine arts on wall with paneling design , cap stand with mirror in centrea and 24 brass golden plated hooks , chandellier for officers dinning hall , romand fabric design blinds , tv paneling with back frame of 18mm water proof marine grade plywood and louvers , customised design dual tone 2 seater sofa , playstation panel with backdrop lighting with neon light , artifacts on wall with mural design for officers ante room , chandellier for officers ante room , toughened glass door of size 78x45 inch with wooden frame on 3 side both inside and outside , romand fabric design blinds with metal frame of size 8x6 ft

Walling Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government