Latest wood panel Tenders | Government wood panel Tenders

State Government

CTN :43228715

23 Dec, 2025 NA

Shimla - Himachal Pradesh

Tender For a/r & m/o various residential qtrs. type-l to type vi of gad at kasumpti shimla-9 (sh:- provide & fixing of wooden paneling in type iv set no. 48 at kasumpti shimla-09).

CTN :43164795

03 Jan, 2026 7.85 Lacs

Sonipat - Haryana

Tender For supply of mountaineering items c c--mountaineering camping table , mountaineering camping stool , aluminum picket one and half feet , belay tube , over all for mountaineering dangri , friends , rack decender , gi gi

CTN :43242609

29 Dec, 2025 5.46 Lacs

Latehar - Jharkhand

Tender For cleaning of septic tank of pit office and police picket and stabilization of the road embankment near wb 02 at ttk ocp, rajhara area.

CTN :43206566

29 Dec, 2025 NA

Ferozepur - Punjab

Tender For material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth and getting

CTN :43159177

27 Dec, 2025 NA

Dehradun - Uttarakhand

Tender For supply of office shelter c c - orl ds wall panel 4000x1000x50mm , orl ds wall panel 900x1000x50mm , orl ds wall panel 1900x1000x50mm , mild steel bar tmt bar 8mm dia and upto 16mm dia to length , office shelter wall panels , office shelter window , office shelter roof ceiling , fd security fence angle iron picket 65x65x6mm length 2 point 8 mtr , fd security fence ms flat 50x5mm of 1 point 80m ht , fd security fence ms flat 50x5mm jindal 3 mtr , fd security fence angle iron picket 50x50x6mm strut post of height 2 point 35mtr jindal , fd security fence barbed wire , fd security fence chain link fence dia wire 4mm and size of mesh 100x100mm , fd security fence 12mm dia 50mm long bolt with nuts and 2x washers for each set , solar security lights set ) /bid number: gem/2025/b/6972224 * /dated: 12-12-2025 & & / bid document1 / 24

CTN :43175956

23 Dec, 2025 1.00 Lacs

Gurdaspur - Punjab

Tender For supply of dry bag , floating cord , baofeng walkie talkie with headset , folding strecther , rucksack cover , picket , luminous stick , camo tape , floating cover , survival blanket , glv trail grip gloves cycling , face paint stick camo , digging tool , cutting pliers , pack zero eight modification , flex paper , transparent sheet

CTN :43183920

22 Dec, 2025 15.20 Lacs

Mumbai - Maharashtra

Tender For repairs plaster, painting, window closing and allied works 2nd floor, stone building picket road, mumbai. (for shifting muddemal crime office )

State Government

CTN :43149126

20 Dec, 2025 4.78 Lacs

Kullu - Himachal Pradesh

Tender For name of work:- stock storage (sh:- providing and fixing wooden panelling at jsv rest house mohal.) estimated cost= 4,78,590/- earnest money=9,580/- time= 2 months

State Government

CTN :43149161

20 Dec, 2025 4.95 Lacs

Kullu - Himachal Pradesh

Tender For name of work:- r/m of office building in jal shakti division kullu in distt. kullu (h.p) (sh:- providing and fixing wooden panelling at jsv rest house mohal.) estimated cost= 4,95,032/- earnest money=9,910/- time= 2 months

CTN :43130699

31 Dec, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of hiring of services for miscellaneous work at hqnavc c c - 06 window and 01 tower ac shifting removing and relocation including removal and refixing of outdoor unit as per requirement , declutter removal of oil dirt and food sediments from 01 industrial kitchen blower and 03 exhaust fans , replacement of cable and spot led lights at naval component sub units logo display areas , electrical services towards fitment and shifting of 02 goose neck microphone from old podium to new podium , replacement of 10 nos defective 15 watt ceilling led light including removal and fitment charges , conference hall enterance exit and in light , conference hall alleyway 20 watt led light fitment charges , rewiring of motor ssc galley exhaust fan , replacement of broken glass door 30 x 30 03 nos book shelf , rexine change of quarter master dso and adso chair , removal and refixing of concealed electric wiring including removal and refixing of wooden panelling 100 mtrs , removal and refixing of concealed network cables above false ceiling of officers tea room , polishing of table top glass , fixing of 05 wall mounted fans including provision of electric supply lines as per site requirement , wall mounting of alkosign board 05 nos including measurement and alignment checking , customisation of 05 gift models including fixing of golden colour name plate carving of name plates including rem oving and refixing including polishing of name plates , removal and refixing of wall mounted display equipment 06 nos as per user requirement including change of location with provision of electric supply line as per site requirement , removing and refitment of map board including rubwood beading and polishing

Wood Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government