Latest wooden drum Tenders | Government wooden drum Tenders

CTN :42125180

22 Oct, 2025 17.81 Lacs

Multi City - Multi State

Tender For procurement of cat b stores - wire brush 8" x 3", coir brush size 8" x 3" wood base consisting of 3 long coir strands placed in brush arranged in 8 column and 4 rows, mason thread, ms wire nails, size: 1/1.5", as per 15-723, specification rust free, ms wire nails, size: 2/2.5", as per is-723, specification rust free, ms wire nails, size: 3", as per is-723, specification rust free, ms wire nails, size: 4", as per is-723-specification rust free, ms wire nails, size. 5", as per is-723 specification rust free, ms wire nails, size: 6", as per is-723 specification rust free, pbs roll 1mtr width x 1mm thick x 20 mtz roll, make: superior quality, rope manila 20mm dia, rope manila, 30mm dia, rope manila, 40mm dia, bow handle 6", bow handle 4, glass pane 6'x3x4mm,, make: saint govain/si certification marked, glass pane 6'x4'x5mm,, make: saint govain/si certification marked, glass pane 2 x 1 x 3mm, make: saint govain/is! certification marked, frosted glass panes 30 cmx30cmx4mm, frosted pin headed glass sheet 4mm 91 x 1 mir, glass putty, make: jk/birla, pvc mosquito proofing mesh 15 mir roll, wire mesh 3mm roll of 15mir, wire mesh 6mm roll of 15mir, wire mesh 10mm roll of 15m, wire mesh 12mm roll of 15m, wire mesh 20mm roll of 15m (welded mesh), hessian cloth 54" width, hinges 4", with screw, make:bita/golden/girson/diamond/isi, hinges 2" with screw, make bita/golden/girson/diamond/isi, hinges 3" with screw, make bita/golden/girson/diamond/isi, ms bolt hinges/ butt hinges (100mm long), ms bolt hinges/ butt hinges (75mm long), m seal 100gm, ms screw size: 20mm (3/4") (100 nos/pkt), ms screw, size: 25mm (1") (100 nos/pkt), ms screw, size: 50mm (2") (100 nos/pkt), ms screw, size: 75mm (2") (100 nos/pkt), ms screw, size: 100mm (4") (100 nos/pkt), green cloth, curtain ring, wall putty (20 kgs pack), make: jk/berger, weather coat exterior primer 20 ltr drum, sunmica top wooden finish, size: ext, sliding ball with screw size: 10inch, sliding bolt with screw size: 8inch, sliding bolt with screw size 12inch, door stopper, size: 140mm, item discription: aluminium alloy body and toungh, anodised with hard drawn steel spring fixed in floor, tower bolt size: 8, tower bolt size: 6, brass tower bolt barrel type 150mm, brass lower bolt barrel type 100mm, door window handle 100mm, door window handle 150mm, hydraulic door closer make: godrej, sand paper 80no, sand paper 120no, sand paper 60no, wood primer make: shalimar, varnish 1 lir pack make: asian/pidilite berger, looking mirror 450x800mm, make gold plus/saint gobin/modiguard, while cement (1kg pkt) make jk/birla, floor tiles 1'x1'x 10/12mm (ceramic/vitrified), make somany/jhonson/kajaria/nitco/orient, floor tiles 2 x2 x 10/12mm (ceramic/vitrified), make somany/jhonson/kajaria/nitco/orient, wall tiles 8" x 12' make, somany/jhonson/kajaria/nitco/orient, wall tiles 1' x 1' cerarnic/vitrified), make somany/jhonson/kajaria/orient, pvc false ceiling panels,, colour : white, size: 10x10 long 6-8mm thick, with gi channel and concealed fixing arrangement to roof truss and top side of panels all fitment complete., make: sarah/raunaq/equivalent, drill bit 20mm, drill bit 18mm., drill bit 12mm, drill bit 5mm, plastic rope size: 10mm, gi wire 4mm, cornfirming to is-280: 2006, gypsum screw size 1 (100 nos/pkt) pvc door (out to out size 0.85 x 1.90 mtr), frame 50 x 47 mm made out of 5 mm plan colour pvc sheet reinforce with ms square tube incl pvc shuller 30 mm thickconssting of frame made out of ms tube for top and bottom rail with pvc sheet strip 20 mm width suitable pvc steel bedding complete indis 100 mm ss hinge-30 nos a/u handle 125 mm-02 nos a/u tower bolt 150 mm -02 nos, stainless steel hasp and staple 100mm, door stopper (brass/ordinary type), magnate catch, (make:, amar/mahamaya/crown), gas sparker (gas lighter), gas pipe (lpg), hinges 1" width 3" length, stainless steel curtain rod 20mm dia 1.5mtr length, stainless steel bracket (for 20mm dia curtain rod), stainless steel nobe (for dia curtain 20mm dia),

Central Government/Public Sector

CTN :42105519

09 Oct, 2025 NA

Kota - Rajasthan

Tender For supply of jointless grooved hard drawn copper contact wire 107 sq mm made out of continuous cast copper wire rods in non returnable wooden drum length should not be less than 1500mtrs and balanced qty. in one drum. as per rdso spec. no. ti/spc/ohe/cw/0971or latest. make rdso approved vendor. ( material to be procured from rdso approved sources only.)rdso item id 3100606

Central Government And Public Sector

CTN :42090110

10 Oct, 2025 NA

Multi City - Multi State

Tender For stranded anneled copper jumper wire of size 160 sqmm as per rdso specification no.ti/spc/ohe /jmp/0941.(1)no. of strands/wire dia (mm)=19/7/1.25,(2) construction: rope lay,(3)nominal overall dia (mm) = 18.75 (4)weight (kg/km)=1504.0,(5)resistance at 20 degree c (ohm/km) std:0.1090, max.0.1117. (supply of material in wooden drums .) [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :41384514

28 Oct, 2025 4.54 Crore

Jodhpur - Rajasthan

Tender For corrigendum : rate contract for purchase of various items for repair of failed distribution transformers at nigams workshop - alu lv strip (size as required) dpc(variable with base date 1.6.25), alu hv bare (size as required) semc(variable with base date 1.6.25), cotton tape 1, sleeve 1 mm, 20 mil paper 30, 4 mil paper 24, 4 mil paper 26, 4 mil paper32, 4 mil paper 30, gum, 10 mil paper 20, core clamping insulation 2 mm, yoke various sizes mm, common block various sizes mm, oil duct various sizes mm thickness, stick various sizes mm, wooden spacer 45x45x15 mm, spacer 45x45x3 mm, ring 136x201x2 mm, delta flat 480x30x5 mm, lv chips 380x6x1 mm, foot plate paper 2 mm, p.c phase barrier various size mm, nut g.i.various sizes, washer g.i.various sizes, bolt g.i.various sizes, delta wire various sizes, earthing patti 1 mm thickness tinned copper 20mmx1mm, aluminium flat various sizes mm, delta patti, sleeve 8 mm, sleeve 4 mm, sleeve 6 mm, sleeve 10 mm, sleeve 12 mm, sleeve 1.5 mm, sleeve 2 mm, 1/2 nut g.i., 1/2 lock nut g.i., 1/2 washer g.i., flux, solder wire, copper brazing rod, aluminium brazing rod, brazing powder (l&t), crepe tape 1, 1/2 bakelite, 3/8 bakelite, hv bushing (porcelain,), hv bushing (metal part) complete set, lv bushing (porcelain,), lv bushing (metal part) complete set, ehv grade type-ii transformer oil ( with drum )(variable with base date 1.6.25), prv valve (virat), pvc cap 1/2, ci cap 1.25, paint (green/red/yellow/white/blue), thinner, zinc chromate, cork washer 12x32mm,110x74mmx50x28mm, top cover gasket 50x50x6 mm, oil gauge prismatic glass various size, oil gauge gasket various sizes, oil gauge washervarious sizes, oil gauge nut various sizes, vent pipe gasket 110x110x3 mm, hv clamp, aluminium member, m.s nuts,bolts,washers various sizes, mccb for box 32 amp, mccb for box 40 amp, mccb for box 63 amp, mccb for single phase 25amp, mccb for single phase 40amp, mccb for single phase 63amp, mccb box gasket 500x250x5 mm, silica gel breather, hv bmc, arcing horn with strip & nut bolt, candles mom, backalite sheet 0.50 mm thickness 60x60 mm, u clamp 70 x 50 x 70 mm prv, u clamp ci cap 50x50x50 mm, cloth, lt internal/ oil immerged circuit breaker assorted rating, holdtite, 1/4x2.5 bolt brecker, 1/4 nut brecker, aluminium lugs (various sizes), paint gun, engraving machine, hv farma (size as required), lv farma (size as required), grinder cutter wheel 4, lt bushing box

Central Government/Public Sector

CTN :42011191

08 Oct, 2025 NA

Kota - Rajasthan

Tender For supply of joint less hard drawn grooved copper contact wire 107 sq.mm made out of continuous cast copper wire rods in non returnable wooden drum, as per rdso specification no. ti/spc/ohe/cw/0971 with latest amendment.note- material to be procured from rdso approved sources only rdso item id-3100606)

CTN :41966133

25 Oct, 2025 NA

Hyderabad-T - Telangana

Tender For supply of g i drum of different sizes : : - gi drum 120 liters capacity made out of 18 gauge gi sheet as per specification for nfc hyd , gi drum 120 liters capacity made out of 18 gauge gi sheet as per specification for nfc pkl , gi barrels of 200 by 205 by 210 liters nominal capacity with lid and top ring made out of 18 gauge detail as per spec for nfc pkl , gi barrels of 200 by 205 by 210 liters nominal capacity with lid and top ring made out of 18 gauge detail as per spec for nfc kota , gi barrels of 200 by 205 by 210 liters nominal capacity with lid and top ring made out of 18 gauge detail as per spec for nfc hyd

CTN :41967787

13 Oct, 2025 80.0 Thousand

Jaipur - Telangana

Tender For procurement of spares for hea (high energy arc) igniters installed in boilers of both units at stpp, jaipur, mancherial, telangana. - roof bolts, m.s. bolts & nuts, rivets, washers & screws, dog nails, fish plates, nuts & bolts for fish plates, belt jointing pins, cable hooks and signal hooks, belt conveyor rollers, belt sections, resin capsules, cement capsules, gi canisters, blasting gallery – spacers, radiator repairs, repairs and rewinding of motors of ac & dc, repairs / rewinding of transformers (welding / lighting/ power), gi wire, wire mesh for longwall salvage, manufacturing of supply of electrical coils for, i) ac motors up to 6.6 kv grade, ii) transformer coils up to 33 kv grade, repairs of rotors for electric motor, lighting cable, steel chock manufacturing, house wiring, all types of fan repairs, shovel bucket welding, repairs of pumps, couplings manufacturing, special steel and alloy castings (tooth points, track pads, mn steel, casting), manufacturing of fly ash bricks. (not to be manufactured at stores site. it, shall be at their own site)., manufacturing of pump components (spares)., transformer oil filtration, reconditioning of drill bits and drill rods, vulcanizing the old trailing cables of drill machines, sdls, lhds, etc., work should be carried out at the respective mine premises)., manufacturing of earth clamps, g.i flats, g.i bolts and nuts., crimping of hydraulic hoses., repairs to hydraulic pumps, motors, control valves and other related, components, refurbishing of lt & ht switches with oem spares including testing., manufacturing / repairs of slip rings & d-contacts., furniture repairs i.e., cane chairs, table, almirahs, etc., repairs to wet grinders, water purifiers, and water coolers, manufacturing of coupling bolts of all sizes, fabrication of oht line components like cross arms, clamps, stay wires,, cross brassings, base plates etc., manufacturing of haulage rope drum rollers., all sizes of ventilation doors., safety boards designing/stickering/painting with retro-reflective radium, papers/paint on hemm/radium stickering in underground & surface,, radium boards, safety boards & radium jackets, fabrication of lighting & cable cross over towers, maintenance & repairs of air conditioners on hemm, painting work in underground and on surface, fabrication and erection of ms structural works like gantry, bunker etc., tailoring works at hospitals & area workshops, manufacturing of hume pipes, clay pills manufacturing, maintenance of pmts/lighting transformers/power transformers & substations, erection/renovation of residential/pmts/sb-station earth pits, (conventional type/chemical type), testing of all protective relays & mprs, tub assembling/repairing of coal tubs in mines, ci casting works like ci pulley, tub wheels, outsourcing works in mines, like masonary walls construction, surface, material loading, cleaning and dusting in underground etc., all types of computer software installation, antivirus, hardware and, network installation., cc cameras installation and repairs.

Central Government/Public Sector

CTN :41883824

30 Sep, 2025 NA

Kota - Rajasthan

Tender For supply of stranded annealed copper jumper wire(50 sq.mm)(19/1.80mm)[in non-returnable wooden drum] as per rdso specification: ti/spc/ohe/jmp/0941 or latest. make rdso approved vendor. (material to be procured from rdso/core sources only.).note-item reserved for rdso approved source with item id-3100640 & sub item id: 3100640002

Central Government/Public Sector

CTN :41883826

30 Sep, 2025 NA

Kota - Rajasthan

Tender For supply of uninsulated cadmium copper catenary wire [19/2.10mm] 65 sq mm [in non returnable wooden drum ]. as per rsdos specification no. eti/ohe/50/ [6/97] with a and c slip no. 1 to 6 or latest. make rdso approved vendor.(material to be procured from rdso sources only.))note-item reserved for rdso approved source with item id: 3100607.

Central Government/Public Sector

CTN :41914013

30 Sep, 2025 NA

Kota - Rajasthan

Tender For supply of jointless grooved hard drawn copper contact wire 107 sq mm made out of continuous cast copper wire rods in non returnable wooden drum. as per rdso spec. no. ti/spc/ohe/cw/0971or latest. make rdso approved vendor.note-material to be procure through rdso approved sources only. rdso item id 3100606.

Wooden Drum Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector