Latest wooden drum Tenders | Government wooden drum Tenders

Central Government/Public Sector

CTN :43782452

27 Feb, 2026 NA

Gandhidham - Gujarat

Tender For supply of barrel pump 1 inch dia 3 feet long material : cast iron body & steel pipe.capacity 25 lpm, suction tube length 1060 mm, output pipe diameter 90mm.

corporations/Associations/Others

CTN :43747619

04 Feb, 2026 NA

Hyderabad - Telangana

Tender For auction sale of pneumatic wiper machime,iron scrap battery charger,steel melt scrap fly wheel,scrap hitch 2 seater asst w/cush,scrap fip elements,u/s water pump tata,scrap barrel empty w/lid - grease,iron scrap ms turing boring w/b,scrap tube light and ac/dc bulbs,steel melting scrap crank shaft,scrap air coolers,scrap delux bus fans,scrap oil seals,hand brake valve,turbo charger,iron scrap jack hydralic andmech,can plastic 35 ltr,cans plastic 30 lts,m s/copper scrap - altnat starter,steel melt scrap hub f and r,electrical horns,can plastic 30/40/50 ltrs,scrap waste paper,syncronizer rings,scrap plastic rubbish,c i u/s hacksaw machine w/motor 0 5h,timing case cover,rockert shaft,iron scrap tools,steel scrap - gear box main shaft

Central Government/Public Sector

CTN :43695486

02 Feb, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of procurement of acs and sgci rolling mill work rolls d d -2003655 , 2003690 , 2003708 , 2003717 , 2003733 , 2003734 , 2003736 , 2003737 , 2003738 , 2114152 roll material alloy cast steel hardness 40-45 shore c drawing reference 1-d22939,rev-c tensile strength 85 to 100 kgf/mm stand no billet mill 1 & 2 size 850 x 1200 mm barrel hardness 40-45 shc roll approximate unit weight 7. 35 tons uts 85-100 kgf/sq. mm neck hardness 40-45 shc neck runout 0. 04 mm roll coating anti-corrosive ring hardness 600-700 hv3 test certificate required yes ring drawing no mec/1/22938/rev c ---------------------------------------- special instructions: ---------------------------------------- 1) ultrasonic,uts & elongation tests shall be done and certified. 2) flat wobblers to be strictly concentric with roll neck journals. 3) rolls to be suitably packed and numbered for identity. 4) the microstructure should be free from continuous network of carbides along the grain boundaries. 5) t. c. to be given along with micro-structure photograph. a seperate copy to be sent to d. g. m(rs&rs) at the time of delivery. 6) the rolls shall be guaranteed against manufacturing defects such as blow holes, cavity, non-metallic inclusions, pipe segregation,cracks,hard spots, flakes etc which may adversely affect their service life. 7) should any roll fail prematurely or give sub-standard performance due to the above defects, the suppliers shall rectify the defects at their cost wherever possible to the entire satisfaction of vsp or make prorata compensation or make full replacement if the roll has been rejected before use. 8) the rolls are also to be guaranteed for the roll life as mentioned or 5 ) /bid number: gem/2026/b/7117383 * /dated: 23-01-2026 & & / bid document1 / 23years from the date of supply to vsp which ever is earlier. this guarantee clause superseeds, guarantee mentioned elsewhere in the po(a/t), in this regard. 9) hardness test of end ring shall be done and certified. 10) these rolls are used in roughing stands of hot rolling mill. , roll material sg cast iron (accicular) hardness 70-75 shore c drawing reference 1/4012885,rev-e stand no bar mill 19 & 21 size 360 x 600 mm barrel hardness 70-75 shc roll approximate unit weight 0. 70 tons neck hardness 38-45 shc neck run out 0. 04 mm roll coating anti-corrosive coating drop in hardness 1 shc per 10mm on barrel depth -----------------------------------special instructions: ------------------------------------ 1) flat wobblers to be strictly concentric with roll neck journals. 2) rolls to be suitably packed and numbered for identity. 3) t. c. to be given along with micro-structure photograph. a seperate copy to be sent to d. g. m(rs&rs) at the time of delivery. 4) the rolls shall be guaranteed against manufacturing defects such as blow holes, cavity, non-metallic inclusions, pipe segregation,cracks,hard spots, flakes etc which may adversely affect their service life. 5) should any roll fail prematurely or give sub-standard performance due to the above defects, the suppliers shall rectify the defects at their cost wherever possible to the entire satisfaction of vsp or make prorata compensation or make full replacement if the roll has been rejected before use. 6) the rolls are also to be guaranteed for the roll life as mentioned or 5 years from the date of supply to vsp which ever is earlier. this guarantee clause superseeds, guarantee mentioned elsewhere in the a/t, in this regard. these rolls are used in hot rolling mill, roll material sg cast iron (accicular) hardness 70-75 shore c drawing reference 1-4012884,rev-d stand no bar mill 20 & 22 size 360 x 600 mm barrel hardness 70-75 shc roll approximate unit weight 0. 70 tons neck hardness 38-45 shc neck run out between centres 0. 04 mm roll coating anti-corrosive coating drop in hardness 1 shc per 10mm on barrel depth ------------------------------------ special instructions: ------------------------------------ 1) fla

CTN :43681323

02 Feb, 2026 NA

Rajauri - Jammu And Kashmir

Tender For supply of mta new allotment 163 inf bde : : -pcc solid bricks of size 230x115x75 mm of min str m-15 , cement of 43 grade opc in sealed bags each weighting 50 kgs , river sand conforming to is 2116-1980 , crushed stone aggregate 40 mm grading conforming to is 383-1969 , crushed stone aggregate 20 mm grading conforming to is 383-1969 , ms square tube of size 50x50x4mm with 20ft long , cgi sheet of size 10 ft x 3 ft of 0. 50 mm thickness , cgi sheet of size 6 ft x 3 ft of 0 pt 50 mm thickness , self tapping screw 2 inch isi marked , self tapping screw 3 inch isi marked , self tapping screw 1 pt 5 inch isi marked , iron cutting wheel 14 inch isi marked , welding rod 50cm long 3 pt 15mm dia 90 pcs pkt isi marked , ply wood 8 ft x4 ft x12 mm , synthetic hdpe sand bags khaki colour proofed of size 84 cm x 36 cm barrel type double stitched isi marked , ms binding wire 0 pt 90mm isi marked , laip made of angle iron 50x50x5mm 1800mm long

Central Government/Public Sector

CTN :43721162

05 Feb, 2026 NA

Kota - Rajasthan

Tender For supply of 99255786(sse trd kota)(uninsulated cadmium copper catenary wire [19/2.10mm] 65 sq mm [in non returnable wooden drum ]. as per rsdos specification no. eti/ohe/50/ [6/97] with a and c slip no. 1 to 6 or latest. make rdso approved vendor.(material to be procured from rdso sources only.))note-item reserved for rdso approved source with item id: 3100607.

Central Government/Public Sector

CTN :43721163

05 Feb, 2026 NA

Kota - Rajasthan

Tender For supply of jointless grooved hard drawn copper contact wire 107 sq mm made out of continuous cast copper wire rods in non returnable wooden drum. as per rdso spec. no. ti/spc/ohe/cw/0971or latest. make rdso approved vendor.note-material to be procure through rdso approved sources only. rdso item id 3100606.

Central Government/Public Sector

CTN :43721164

05 Feb, 2026 NA

Kota - Rajasthan

Tender For supply of jointless grooved hard drawn copper contact wire 107 sq mm made out of continuous cast copper wire rods in non returnable wooden drum length should not be less than 1500mtrs and balanced qty. in one drum. as per rdso spec. no. ti/spc/ohe/cw/0971or latest. make rdso approved vendor. ( material to be procured from rdso approved sources only.)rdso item id 3100606

Central Government/Public Sector

CTN :43721170

05 Feb, 2026 NA

Kota - Rajasthan

Tender For supply of jointless grooved hard drawn copper contact wire 107 sq mm made out of continuous cast copper wire rods in non returnable wooden drum length should not be less than 1500mtrs and balanced qty. in one drum. as per rdso spec. no. ti/spc/ohe/cw/0971or latest. make rdso approved vendor. ( material to be procured from rdso source only rdso id-3100603)

Central Government/Public Sector

CTN :43729796

05 Feb, 2026 NA

Kota - Rajasthan

Tender For supply of joint less hard drawn grooved copper contact wire 107 sq.mm made out of continuous cast copper wire rods in non returnable wooden drum, as per rdso specification no. ti/spc/ohe/cw/0971 with latest amendment.note- material to be procured from rdso approved sources only rdso item id-3100606)

corporations/Associations/Others

CTN :43686466

06 Feb, 2026 NA

Dehradun - Uttarakhand

Tender For auction sale of tyre scrap items, as per lot description,scrap empty barrel close, open, plastic, as per lot description,battery scrap items, as per lot description,brunt oil filled in drum, dirty diesel mixed dust and water, etc,scrap iron items, as per lot description,scrap g.i. sheet items, as per lot description,scrap aluminium items, as per lot description,uk 07 pa 1923 tata scrap complete chassis with desh board, etc as per annexure,uk07pa3067 leyland scrap complete chassis with desh board, etc as per annex

Wooden Drum Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors