Latest worm drive hose clamp Tenders | Government worm drive hose clamp Tenders

corporations/Associations/Others

CTN :42721109

26 Nov, 2025 2.21 Crore

Tiruchirappalli - Tamil Nadu

Tender For manufacture, fabrication, supply,erection, testing and commissioning with 1x8 mva pr.tr,stn transformer, associated equipments, accessories, control panels, control room and electrical works at o.krishnapuram in trichy metro under tkc thro e tener - electrical material supply, power transformer 33/11kv, 8mva power transformer with oltc, breaker along with ct for outdoor ss 33 kv (gc) vcb (out door) 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (600-300/1-1a) with structure and complete accessories with breaker platform., 11kv (lv) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulatedwith permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (1200-600/1-1a) with structure and complete accessories with breaker platform., 11kv (feeder) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (400-200/1-1a) with structure and complete accessories with breaker platform., potential transformer 33kv potential transformer with tc (single phase unit), 11kv potential transformer with tc (three phase unit), panels ac panel for 33kv ss, 110 v dc annunciation panel type b, 110v dc indoor c&r panel for gc breaker, 110v dc indoor c&r panel for lv breaker, 110 v dc indoor c&r panel for twin feeder, control cables, junction box and accessories 14c x 2.5 sq.mm copper cable armoured, 8c x 4 sq.mm copper cable armoured, 4c x 4 sq.mm copper cable armoured, 4c x 2.5 sq.mm copper cable armoured, 2c x 2.5 sq.mm copper cable armoured, isi mark 19 / 22 mm cable gland as directed by the field engineer., isi mark 25 mm cable gland as directed by the field engineer., isi mark cable 28 mm gland as directed by the field engineer., lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination, supply of gi chequerred plate 6mm thickness, junction box supply of ct/pt junction box made out of 14swg (2mm) m.s.sheet wherever required as directed by the field engineer. the box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 400w x 300h x 150d, supply of ac junction box of size 535x310x127mm of 18swg ms sheet including hrc fuse unit-18 nos. should be fitted with base, consumables etc. (the box shall be vermin proof, shall have sturdy hinges and locking arrangements), supply of mounting channel suitable for cbtm 5 terminal block in panel /box as required and as directed by the field engineer., supply of disconnected type terminal block suitable for ct circuits in panels/ box as required & as directed by the field engineer, supply of isi mark bakelite hrc fuse holder with fuse of 2/5/10/16 amps reputed make in panels/ boxes for ac/dc/pt circuits wherever required as directed by the field engineer. 16 amps - fuse holder with hrc fuse, 63amps - fuse holder with hrc fuse, bus & bus materials zebra acsr conductor, 2.0" / 50 mm aluminium bus bar (thickness:5 mm), 22/33 kv pt insulators, 11kv pt insulator, 11kv, 120kn disc insulators (antifog), strung bus eye bolt of 18 - 20 mm dia gi rod of required length suitable for 33kv, 22kv and 11kv strung bus including cost of gi rod and 2nos gi nuts & washer as directed by the field engineer., clamps and connectors tension fitting clamp 4 bolted for zebra, t clamp for 2" bus to single zebra, t clamp for zebra to zebra, switchend clamp for single zebra, switchend clamp for 2" busbar, reducer clamp for 2" bus to zebra, pg clamp for zebra, free end clamp for 2"busbar, corana bell for 50mm bus bar, switch end clamp for mink, seating block for 2" bus bar(for giving elect co

Central Government/Public Sector

CTN :42764119

27 Nov, 2025 NA

Perambalur - Tamil Nadu

Tender For supply of worm drive hose clamp made of stainless steel, grade ss 304, size 90 mm confirming to is: 4762 / 2002. make. klipco, norma only accepted.

Central Government/Public Sector

CTN :42764305

11 Dec, 2025 NA

Harnaut - Bihar

Tender For supply of worm drive hose clamp size: 160 mm dia. is: 4762:2002 (2nd revision), tab-1, aisi-304.

Central Government / Public Sector

CTN :42745500

25 Nov, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of worm drive hose clamp 30 mm conforming to is 4762: 2002 (only klipco, hylite brands will be acceptable).

State Government

CTN :42577465

13 Nov, 2025 80.00 Lacs

Shivpuri - Madhya Pradesh

Tender For rate contract award for purchase of various electrical equipment/goods and safety appliances - rate contract award for purchase of various electrical equipment/goods, trip coil shunt 30 volt dc suitable for 33 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 33 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make shreem, trip coil shunt 30 volt dc suitable for 11 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make - bhel, trip coil shunt 30 volt dc suitable for 11 kv vcb make erl, trip coil shunt 30 volt dc suitable for 11 kv vcb make alstrem, trip coil shunt 30 volt dc suitable for 11 kv vcb make schenider, trip coil shunt 30 volt dc suitable for 11 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 11 kv vcb make c&s, trip coil shunt 30 volt dc suitable for 11 kv vcb make - s&s, closing coil shunt 30 volt dc suitable for bhel make vcb, closing coil shunt 30 volt dc suitable for crompton make vcb, closing coil shunt 30 volt dc suitable for essun make vcb, closing coil shunt 30 volt dc suitable for megawin make vcb, closing coil shunt 30 volt dc suitable for stelmec make vcb, closing coil shunt 30 volt dc suitable for areva make vcb, expulsion fuse 40 amp. (t-40) for capacitor bank, expulsion fuse 60 amp. (t-60) for capacitor bank, digital clamp meter tong tester (0-750 volt ac 1000 amp. ac) make- mexo/motwane, megnatic oil gauge for power transformer (mog) 6 inc dia with lead, spring charging motor suitable for 11 kv vcb make-bhel, spring charging motor suitable for 11 kv vcb make - crompton, mfm suitable for control panel of all makes., selector switch suitable for control panel of all makes., buchholz relay(gas & oil operated) (is 3637) flenge-6 inch, gi nut bolt assorted size, tool kit with box specification having per kit 1-de spanner set of 10 pieces no. 6x7 to 24x27 2-ring spanner set of 10 pieces no. 6x7 to 24x27 3- cutting pliers (8 ) 01 no 4-nose pliers (6 ) 01 no 5-pipe wrench adjustable (12 ) 01 no. 6-hammer 01 no. 7-hexa with blade 01 no. 8-screw driver (06 ) 01 no. 9-screw driver (08 ) 01 no. 10-screw driver (10 ) 01 no 11-screw driver (12 ) 01 no 12-wrench pana 13-chisel 01 no make tapariya/venus, 11 kv insulated pull rod suitable for bhel make vcb with copper shunt, piercing connector type i for single phase/three phase suitable for 70-150 sq mm cable, raincoat(rubberisied) with cap make duckback, bamboo ladders 24 (feet) long approx having 2 to 3 dia at the bottom and 1.5 to 2.5 at top of bamboo the cross piece i.e. 16 no. step should be at a distance of approx 17 and bamboo ladder should be tightened with g.i. wire of 16 swg at least 4 places the top of ladder should be wide 35 to 40 cm and bottom 58 to 60 cm, silica gel (blue)2 to 4 mesh, breather with silica gel (blue) 2 to 4 mesh for power transformer capacity 5 kg, poly propylene rope 24mm dia make tuff rope/equivalent standered make with isi mark., smart connector suitable for m-16 ct tetminal to dog/raccoon suitable for ai alloy, cb smart clamp for dog/raccoon and panthor conductor, 30 volt dc led type indicating lamp of green/red/yellow colour, breaker control on/off switch handle type suitable for control panel make-recon/kaycee/any standard, lv brass stud complete made of brass stud with its all accessories for 200/315 kva distn. transformer one set for brass stud 300 amp shall comarion of brass stud 265x20 mm 01 no. brass hexa nut full thred-01 no., brass lock nut-02 no., brass rear nut-02no. sealing ball washer -01 (neoprene rubber washer) & brass plain whaser-02 no approximate weight 1050 gram -+5% tollarence., lv brass stud suitable for 25/63/100 kva x-mer length of rod 200mm dia 12mm, both & therder up 60 mm heaving chuck out washer & bass washer with 05 no. nut approximate weight 320 gram -+5% tollarence, 33 kv bushing for ptr suitable for 20 mm stud, 11 kv bushing for ptr suitable for 20 mm stud, rubberized cork seat 4 mm (2 x 3 ft.), rubberized cork seat 6 mm

corporations/Associations/Others

CTN :41384514

28 Nov, 2025 4.54 Crore

Jodhpur - Rajasthan

Tender For corrigendum : rate contract for purchase of various items for repair of failed distribution transformers at nigams workshop - alu lv strip (size as required) dpc(variable with base date 1.6.25), alu hv bare (size as required) semc(variable with base date 1.6.25), cotton tape 1, sleeve 1 mm, 20 mil paper 30, 4 mil paper 24, 4 mil paper 26, 4 mil paper32, 4 mil paper 30, gum, 10 mil paper 20, core clamping insulation 2 mm, yoke various sizes mm, common block various sizes mm, oil duct various sizes mm thickness, stick various sizes mm, wooden spacer 45x45x15 mm, spacer 45x45x3 mm, ring 136x201x2 mm, delta flat 480x30x5 mm, lv chips 380x6x1 mm, foot plate paper 2 mm, p.c phase barrier various size mm, nut g.i.various sizes, washer g.i.various sizes, bolt g.i.various sizes, delta wire various sizes, earthing patti 1 mm thickness tinned copper 20mmx1mm, aluminium flat various sizes mm, delta patti, sleeve 8 mm, sleeve 4 mm, sleeve 6 mm, sleeve 10 mm, sleeve 12 mm, sleeve 1.5 mm, sleeve 2 mm, 1/2 nut g.i., 1/2 lock nut g.i., 1/2 washer g.i., flux, solder wire, copper brazing rod, aluminium brazing rod, brazing powder (l&t), crepe tape 1, 1/2 bakelite, 3/8 bakelite, hv bushing (porcelain,), hv bushing (metal part) complete set, lv bushing (porcelain,), lv bushing (metal part) complete set, ehv grade type-ii transformer oil ( with drum )(variable with base date 1.6.25), prv valve (virat), pvc cap 1/2, ci cap 1.25, paint (green/red/yellow/white/blue), thinner, zinc chromate, cork washer 12x32mm,110x74mmx50x28mm, top cover gasket 50x50x6 mm, oil gauge prismatic glass various size, oil gauge gasket various sizes, oil gauge washervarious sizes, oil gauge nut various sizes, vent pipe gasket 110x110x3 mm, hv clamp, aluminium member, m.s nuts,bolts,washers various sizes, mccb for box 32 amp, mccb for box 40 amp, mccb for box 63 amp, mccb for single phase 25amp, mccb for single phase 40amp, mccb for single phase 63amp, mccb box gasket 500x250x5 mm, silica gel breather, hv bmc, arcing horn with strip & nut bolt, candles mom, backalite sheet 0.50 mm thickness 60x60 mm, u clamp 70 x 50 x 70 mm prv, u clamp ci cap 50x50x50 mm, cloth, lt internal/ oil immerged circuit breaker assorted rating, holdtite, 1/4x2.5 bolt brecker, 1/4 nut brecker, aluminium lugs (various sizes), paint gun, engraving machine, hv farma (size as required), lv farma (size as required), grinder cutter wheel 4, lt bushing box

State Government

CTN :42600806

14 Nov, 2025 29.00 Lacs

Datia - Madhya Pradesh

Tender For rate contract award for purchase of various electrical equipment/goods and safety appliances ur jurisdiction of general manager onm mpmkvvcl datia - rate contract award for purchase of various electrical equipment/goods, trip coil shunt 30 volt dc make stelmec, trip coil shunt 30 volt dc make cgl, trip coil shunt 30 volt dc make shreem, trip coil shunt 30 volt dc vcb make - bhel, trip coil shunt 30 volt dc vcb make erl, trip coil shunt 30 volt dc vcb make alstrem, trip coil shunt 30 volt dc vcb make schenider, trip coil shunt 30 volt dc vcb make c&s, trip coil shunt 30 volt dc vcb make - s&s, closing coil shunt 30 volt dc essun make vcb, closing coil shunt 30 volt dc megawin make vcb, closing coil shunt 30 volt dc areva make vcb, expulsion fuse 40 amp. (t-40) for capacitor bank, expulsion fuse 60 amp. (t-60) for capacitor bank, digital clamp meter tong tester (0-750 volt ac 1000 amp. ac) make- mexo/motwane, megnatic oil gauge for power transformer (mog) 6 inc dia with lead, spring charging motor suitable for 11 kv vcb make-bhel, spring charging motor suitable for 11 kv vcb make - crompton, mfm suitable for control panel of all makes., selector switch suitable for control panel of all makes., buchholz relay(gas & oil operated) (is 3637) flenge-6 inch, gi nut bolt assorted size, tool kit with box specification having per kit 1-de spanner set of 10 pieces no. 6x7 to 24x27 2-ring spanner set of 10 pieces no. 6x7 to 24x27 3- cutting pliers (8 ) 01 no 4-nose pliers (6 ) 01 no 5-pipe wrench adjustable (12 ) 01 no. 6-hammer 01 no. 7-hexa with blade 01 no. 8-screw driver (06 ) 01 no. 9-screw driver (08 ) 01 no. 10-screw driver (10 ) 01 no 11-screw driver (12 ) 01 no 12-wrench pana 13-chisel 01 no make tapariya/venus, 11 kv insulated pull rod suitable for bhel make vcb with copper shunt, piercing connector type i for single phase/three phase suitable for 70-150 sq mm cable, raincoat(rubberisied) with cap make duckback, bamboo ladders 24 (feet) long approx having 2 to 3 dia at the bottom and 1.5 to 2.5 at top of bamboo the cross piece i.e. 16 no. step should be at a distance of approx 17 and bamboo ladder should be tightened with g.i. wire of 16 swg at least 4 places the top of ladder should be wide 35 to 40 cm and bottom 58 to 60 cm, silica gel (blue)2 to 4 mesh, breather with silica gel (blue) 2 to 4 mesh for power transformer capacity 5 kg, poly propylene rope 24mm dia make tuff rope/equivalent standered make with isi mark., smart connector suitable for m-16 ct tetminal to dog/raccoon suitable for ai alloy, cb smart clamp for dog/raccoon and panthor conductor, 30 volt dc led type indicating lamp of green/red/yellow colour, breaker control on/off switch handle type suitable for control panel make-recon/kaycee/any standard, lv brass stud complete made of brass stud with its all accessories for 200/315 kva distn. transformer one set for brass stud 300 amp shall comarion of brass stud 265x20 mm 01 no. brass hexa nut full thred-01 no., brass lock nut-02 no., brass rear nut-02no. sealing ball washer -01 (neoprene rubber washer) & brass plain whaser-02 no approximate weight 1050 gram -+5% tollarence., lv brass stud suitable for 25/63/100 kva x-mer length of rod 200mm dia 12mm, both & therder up 60 mm heaving chuck out washer & bass washer with 05 no. nut approximate weight 320 gram -+5% tollarence, 33 kv bushing for ptr suitable for 20 mm stud, 11 kv bushing for ptr suitable for 20 mm stud, rubberized cork seat 4 mm (2 x 3 ft.), rubberized cork seat 6 mm (2 x 3 ft.), rubberized cork seat 10 mm (2 x 3 ft.), oil temperature indicator (oti) , dial 150mm , with capillary, mercury switch type, winding temperature indicator (wti) , dial 150mm , with capillary, mercury switch type, auxiliary switch suitable for 11 kv vcb make bhel (new), auxiliary switch suitable for 11 kv vcb make megawin, auxiliary switch suitable for stealmac make vcb, auxiliary switch suitable for crompton make vcb, 11 kv insulated pull rod suitable for