Aluminium Scrap Tenders

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

CTN :45738001

11 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of inch l , micro meter changeable anvil 0 to150 mm , measuring tape steel 3000 mm , precision file square with handle 8 inch comma 2nd cut , precision file half round with handle 8 inch comma 2nd cut , set of hand tap , chest comma tool feet j feet , gauntlets prospective welder leather , brushes steel wire 32 mm , portable welding machine , launch into 431 pr03 with hdiii car or truck , mahindra garuda ii i smart diagnostic tool , jaltest by cajoli ottw off highway equipment diagnostic tool 12v plus 24v , jaltest by cajoli cv truck comma bus comma light commercial vehicle 12v plus 24v , garuda 2vc1 professional grade comma j2534 compliant diagnostic tool for tata cv bs3 comma bs4 comma bs6 , cummins diagnostic tool inline 7 , jcb e into cavator construction diagnostic scanner electronic service tool with diagnostic , banjo washer aluminium , cotton waste , anabond red , o clamp 10 mm , emery paper rough or fine , banjo belt , banjo union , hose pipe 10 mm fle into ible , m seal , araldite big 90 gm , wd 40 rust remover , o ring set o size , valve grinding stick , valve grinding past rough or smooth , battery lead positive and negative , battery terminal h by d positive , battery terminal h by d negative , battery led pb for pole , battery thimble h by d , welding rod , flu into for gas welding , gas welding brazing rod 2 point 5 mm into 450 brass , gas welding brazing rod 2 point 5 mm into 450 aluminum , hand gloves leather , shoes for welding , welding appron leather , electeric holder heavy duty 100 ampere , welding cable copper 28 point 59 mm , stainless steel welding tong , aceteylene regulator , o into ygen regulator , torch with nozzle , supreme high pressure gas welding blow pipe , hose aceteylene gas cly , hose o into ygen gas cly , welding cutter blade size 107 into 1 point 3 into 16 mm , injector stage 3 tool kit , torque wrench , torque wrench digital small , bearing puller , mech jack chassis 10 ton , hydraulic jack chassis 10 to 15 ton , bailey plate jack 3 to 4 ton , magnet stick , ultrasonic cleaner , e-star socket and bit socket set , oil drip tray pan , pneumatic transmission oil filling tool with adaptor , heavy duty socket , vice bench heavy duty , dc test lamp digital automatic circuit tester , stanley 94 to 181 comma 150 piece high quality multi tool kit comma containing spanner comma driver sockets bits comma wrenches , vice bench small size , gauge chisel 38 mm , firmer chisel 26 mm , mortise chiesel 12 mm , combination ston , claw hammer , jack planer , pincer , planer machine , portable rotter machine , side cutting paier , circular saw blade 6 inch three square engineer scrapper with handle 100mm, chisel cold flat 25 mm x 200 mm, chisel 6", 9", hammer engineer's ballpin 400 gm, gauge thickness feeler type 0.03 to 0.5 mm, plier circlip external straight nose, plier circlip internal straight nose, spark plug socket 16 mm, spark plug socket 21 mm, hexagon socket head 0.5 inch square drive 10 mm to 32 mm, master tool kit 150 pcs , recersible rachet 0.5 inch square drive 250 mm, torque wrench 0.5 inch square drive 200 mm, allen key long ball point 10 mm, pad lock, pop spanner 6 x 22 mm, pop spanner 15 x 41 mm, nose plier 8", cutting plier 12", adjustable 12', file flat 6", 12", half round file 6", 12", round file 6", 9", 12", star screw driver 6", 9", 12", oil filter remover, torx key t30, injector remover socket 19 mmfor tata 697 bs iii & 497 bs ii, needle file set r, t & p, hammer electrician 200 gm, clamp on multi meter, digital multi meter, continuity tester, hexagon socket head size 6 mm to 42 mm, spinner handle 0.5 inch square drive, //bid details 2 / 91

CTN :45733165

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.p.nfa-1.bin no- 2/a ,7/a & ground floor at near bin -37.exmp.06.2026-27.03 description- scrap aluminium with iron attachment, and other aluminium casting, field coil, lamp caps, aluminium boring etc. our offer: a) scrap aluminium with or without iron attachment. such as- scrap aluminium cylinder for tap changer, aluminium number plate, aluminium feeder wire, steady arm, anti wind clamp, wiper motor, bus bar connector (aluminium), part of filter element of emu motor coaches, compressor & air dryer spares, horn, gauge cover, piston sub assembly, and other aluminium misc.as in the lot which are kept in bin no-2/a & ground floor of near bin 37. qty= 1929 kgs. b) scrap aluminium rear & front cover with or without rubber and grease attachment. in bin no- 7/a . qty- 2462 kgs. loading will be done by purchaser's own arrangment.

Central Government/Public Sector

CTN :45724064

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot non ferrous scrap - ubl/msd/nfs/0020/26/c[pl no 98230049]cond. & u/s aluminum scrap consisting of aluminum frames, aluminum moldings, aluminum roof sheets, ladders, sign boards, pipes, track gauges, cut pieces of chequered plates & similar types of aluminum items.with or without ferrous/rubber attachments. total qty - 2400 kgs.location :- godown no-26/nfs/msd/ubl

Central Government/Public Sector

CTN :45723353

08 Jul, 2026 NA

Multi City - Rajasthan

Tender For auction sale of depot non ferrous scrap - scrap aluminium over head water tanks of and its cover of various sizes with or without rubber and ms fittings if any. weighment will be on weighbridge. [near temple ]

Central Government/Public Sector

CTN :45702770

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - cond & u/s aluminium water tanks(46 nos) and its accessories(lids) of various types, sorts & sizes with available ferrous/pvc attachments with/without cups in as is where is condion. note: 1) permitted to remove ferrous/hose/rubber attachments only. 2. all the removed attachements should kept at one place. pl no 98230025

Central Government/Public Sector

CTN :45702789

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - cond and u/s plastic scrap consisting of chairs, fan blades with/without aluminium insert, upvc frames/windows,ro plant skeletons,polymide hose, cool packs,electical kettle, polymide hose, buckets,pvc mats,plastic bins& trays, broken cans,fan blades, plastic led lights,milton cool pack box, polamide hoses, plastic front frill of window ac,ceramic ring, breathers, pvc water tanks of various capacities&shapes, damaged carbouys of various capacities, plastic/fibre hose and doors with/without ferrous/aluminium frames and handles, catridges/toners, ac plant grills,plastic chairs, fuses, led lights,nylon bush, non contact voltage detector equivalent, plastic reel, flushing cisterns tanks and fittings, weld tester wheel, wear shoe for 70 degree probe, wear shoe for 0 and 37 degree, pvc chairs without arm, pvc frame, 2000 ltr and 500 ltr plastic cans, plastic bucket, door pvc of sizes, led lamps, led tube lights, ro purification plant, pvc water jug, pvc bath stool, pvc t joint pvc quarter pvc coupling, plastic can 20 ltr, pvc moulded chair, mixed plastic empty plastic containers, plastic tray, soap oil dispenser, dust bin pedal type, dust bin pedestal plastic, plastic chair with arm, bucket plastic big, bucket plastic small, mug plastic and all other plastic related items with/without ferrous/fiber/glass attachments in as is where is condition..note: segregation and removal of attachments is not permitted. pl no 98417162. location: behind bin 125

Central Government/Public Sector

CTN :45702796

02 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - 98230025: cond & u/s aluminium scrap consisting of aluminium coil of series reactor with/without ferrous/wood/fiber/insulation of paper/cloth/other attachments as is where is condition, approx wt: 1300 kg for 2 nos ,note: (1) crane loading permitted .location: in front of w-25 ,near witnessing shed of scrap yard /ssd/ptj

Central Government/Public Sector

CTN :45702805

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no wc-07001fac/icf note : - 1 advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b.lot no. bpl/crws/26-27/cond. coach/15/0068 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45702806

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decoram, non-ferrous & restricted items will not be delivered) coach no 1-wc-910037 art/beml2-wc -920016 art/beml 3-wc-910036 art/rcf note : - advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b.lot no. bpl/crws/26-27/ cond. coach/15/0069 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. note: delivery will be made on actual nos basis.

By Cities

By States

By Agencies

By Ownerships

By Sectors