Case Tenders

Central Government/Public Sector

CTN :45737277

20 Jul, 2026 NA

Ambala - Haryana

Tender For supply of transmission measuring set (tms kit) complete with tone generator and db meter having 470-, 600-and 1120-ohm output impedance range, less than 2% distortion, more than 60 db degree of balance, transmission level of +10 dbm to -50 dbm in 10 db steps and +1 to -10 db continuous variable, accuracy +- 0.2 db, lcd digital panel meter, 3 & half digits display, rechargeable ni-mh battery. complete set with all connection lead & accessories. (connection cables, test leads, user manual, carrying case). [warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45728540

22 Jul, 2026 NA

Rewa - Madhya Pradesh

Tender For supply of digital gloss meter 60 degree with calibration standard tile, calibration certificate, instruction manual, carrying case & usb cable. make:- rhopoint or similar [ warranty period: 30 months afterthe date of delivery ] ]

Central Government/Public Sector

CTN :45731612

06 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For digital pressure gauge as per the following specification: - 1). range: 0 to 16 bar, 2). pipe connection: 1/4 inch male bsp, 3). resolution: 0.01 bar, 4). accuracy: +/- 0.5% full scale, 5). pressure units should be in bar, psi and kg/cm2, 6). instrument dimensions: 80 mm -105mm, 7). instrument casing: stainless steel/abs, wetted parts: stainless steel. 8) battery powered make : ascorp/equinox/wika/excel/insize/winters. note: - user manual, carrying case & calibration certificate from nabl accredited or govt labs should be produced along with supply. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45733143

08 Jul, 2026 NA

Multi City - Rajasthan

Tender For auction sale of depot ferrous scrap - ms and cast steel scrap of diesel loco parts comprising of cylinder liners, cylinder head, fly wheels, gear, pin, connecting rod, piston, ring, valve, camshaft, turbo parts, screw coupling and fittings, axle boxes, shockers, knuckle adopter, gear case, stay plates, collar , housing, buffer assembly, ring, fasteners and other parts of sort and size with or without minor non ferrous attachment and residue oil and grease if any [ bin 28]

State Government

CTN :45720726

15 Jul, 2026 3.50 Lacs

Satna - Madhya Pradesh

Tender For materials for the sewing industry (section 02) - paper tape , welding rod , nails (nos. 14, 17, 20) , yellow clay, chalk clay , plastic cane (for chair weaving) , chandras (shellac resin) , nc thinner , sandpaper (4-inch) , turpentine oil , paint (all colors) , water-based paint (all colors) , oil-based paint (all colors) , brush , brush , saw , triangular file , plywood (12 mm) , plywood (18 mm) , plywood (8 mm) , plywood (6 mm) , sunmica (1 mm) , sunmica (0.8 mm) , iron angle, iron strip , metal cutting blade , metal cutting blades , nuts, bolts, and washers (all sizes) , foam (3-inch, 32-density) , foam (2-inch, 32-density) , foam (1-inch, 32-density) , sofa fabric/rexine , grinding wheel , putty , brush cutter (circular blade) , gi wire , broom sticks , adhesive (sr 505) , welding goggles (black/clear) , measuring tape , drill bit , wooden block/batten , teak wood , acacia wood , sheesham wood , firewood , sealer , wood touch-up/finish , sandpaper , electric planer , c-clamp , bench vise , hand drill machine , compressor gun , compressor hose , planer machine molding die , sewing machine oil , nylon shirt buttons , hand sewing needles , sewing machine needles (10 pieces per packet) , sewing machine treadle/pedal , tailor's chalk , thread reels , amela machine bobbin case , sewing machine needle plate , scissors (size 08, 10) , sharpening stone , sewing machine , overlock machine , embroidery threads , embroidery frame , macramé cord (cotton, polyester, nylon, jute) , poly master , tree rope , stapler pins , white paper (80 gsm) , laser paper (green, 80 gsm) , white paper (68 gsm) , white paper (68 gsm) , ruled paper (68 gsm; ream of 1000 sheets) , ruled paper (68 gsm) , white paper (57 gsm) , brown paper (80 gsm) , card sheet (165 gsm) , cardboard sheet (no. 32) , rin/surf excel laundry soap , coating , fevicol , winding thread , winding cloth , fount solution , brown tape , screen printing ink , decoter , german sponge , reducer , winding paper , synthesizer , yellow envelope paper , stapler gun , winding paper , colored paper (70 gsm) , annual contract section , picking wall fiber , pickers , ratchet catch (leaf set) , pressing cam lever lr-101 , wooden steel (no. 29) , wheel gear 14t (no. 62) , bevel gear , worm wheel stud , ratchet catch lever , buffer soldering bracket , buffer strap (leather) , stick cap , bearing , ratchet wheel , warp weaver , worm , parachute rope , fine belt , picking stick , tariff wheel , handloom pickers , fast dyes (for fabric) , powerloom steel reed , yarn 2/40s on cone (coloured/white) , yarn 6s on coloured cone , coloured wool , yarn 2/60s on cone (coloured/white) , jute fabric , yarn 6s on cone , handloom reed (no. 12) , warping machine brake belt (leather) , dari beater/comb (wooden) , emery strip , warp frame hook set , pick/bobbin filling rod (handloom) , cast iron welding rod , temple rod/cover , weft filling needle/hook

Central Government/Public Sector

CTN :45632187

03 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of viscometer u-tube reverse flow bs/ip/rf viscosity 2-10.2,viscometer u-tube reverse flow bs/ip/rf viscosity 2-10.2,viscometer u-tube reverse flow bs/ip/rf viscosity 2-10.2,viscometer u-tube reverse flow bs/ip/rf viscosity 2-10.2,viscometer u-tube reverse flow bs/ip/rf viscosity 2-10.2,viscometer u-tube reverse flow bs/ip/rf viscosity 2-10.2,viscometer u-tube reverse flow bs/ip/rf viscosity 6-30.3,viscometer u-tube reverse flow bs/ip/rf viscosity 6-30.3,viscometer u-tube reverse flow bs/ip/rf viscosity 6-30.3,viscometer u-tube reverse flow bs/ip/rf viscosity 6-30.3,viscometer u-tube reverse flow bs/ip/rf viscosity 6-30.3,viscometer u-tube reverse flow bs/ip/rf viscosity 6-30.3,20 mm aluminium crimp caps (head space) ptfe beige /white silicon septa (case/100) .,20 mm aluminium crimp caps (head space) ptfe beige /white silicon septa (case/100) .,20 mm aluminium crimp caps (head space) ptfe beige /white silicon septa (case/100) .,20 mm aluminium crimp caps (head space) ptfe beige /white silicon septa (case/100) .,

corporations/Associations/Others

CTN :45702242

07 Jul, 2026 17.03 Lacs

Kota - Rajasthan

Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh

Central Government And Public Sector

CTN :45730821

07 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of portable handheld digital gauss meter (tesla meter) to model no. d20b of m/s lab magnet orexactly equivalent, complete with probe, battery, carrying case, calibration certificate, warranty certificate,technical datasheet, and all standard accessories. specifications: 1) type : digital, 2) measurement : ac/dcmagnetic field, 3) range : up to 20,000 gauss, 4) resolution : 0.1 gauss, 5) accuracy : +/- 1.0% or better, 6) display : digital lcd, 7) probe : suitable for magnetic surface measurement, 8) power source : battery operated, 9) battery life : minimum 18 hours. note: the offer shall accompany the catalogue / brochure of theitem. [ warranty period: 12 months after the date of delivery ] ]

CTN :45738569

21 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of steel adjustable wrench , engine mounting removal smts , graduation disc removal smts , cutting plier , nose plier , digital multimeter , ratchet set 46 pcs , ratcheting spanner set , stapler gun , scissor , bobbin case , welding helmet , welding goggles , leather gloves , leather apron , tool belt for welder , drill bit set , tool bag stanley

CTN :45742273

08 Jul, 2026 NA

Dehradun - Uttarakhand

Tender For supply of led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , plasticized pvc tapes with non-thermosetting adhesive for electrical purpose (v2) isi marked to is 7809 (part 3/ sec1) (q2) , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , moulded case circuit breakers (mccb) conforming to is/iec 60947 (part 2) (q2) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , cable joint kit suitable for cables up to and including 33 kv (v2) (q3) , pvc insulated copper cable single core and multi core circular sheathed with rigid conductor (v2) isi marked to is 694 (q2) , led batten light (led tube light) (v2) (q2) , led luminaire (recessed luminaire) (ceiling light) conforming to is 10322 (part 5/section 2) (v4) (under bis scheme - ii) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , self ballasted led lamps (led bulb) (v3) conforming to is 16102 (part 2) (under bis scheme - ii) (q2) , bathroom or toilet mirror (v3) (q4)

By Cities

By States

By Agencies

By Ownerships

By Sectors