Coating Tenders

Central Government/Public Sector

CTN :41694849

25 Sep, 2025 NA

Mumbai - Maharashtra

Tender For : roof mounted ac package unit (rmpu) for lhb eog ac coaches in coach sets consisting of rmpu(with r-407c refrigerant)-02 nos. and microprocessor controller unit -1 no., with supply of bellows set consisting of01 no. supply air bellow, 02 nos fresh air bellows & 02 nos. return air bellows ducts made of meta aramid/ paraaramid fabric with silicon rubber coating on both sides to spec. no. rdso/pe/spec/ac/0197-2020 (rev-0), rmpuas per specification no rdso/pe/spec/ac/0061-2005, rev-1, type-i & microprocessor controller unit tordso/pe/spec/ac/0139-2009, rev-1, complete with accessories, as per scope of supply as in the rdsospecification.rdso item id: 3100018

State Government

CTN :41676459

20 Sep, 2025 NA

Guwahati - Assam

Tender For empanelment of agencies for supply of different laboratory instruments for various water testing laboratories under jal jeevan mission, assam - ion meter with electrode and accessories for fluoride & nitratemeter: ph/ion/ mv-redox-orp/ temperature benchtop meter with electrode for testing both fluoride & nitrate separately in water samples. technical specification: ph range: -2.000 to 20.000 resolution 0.1, 0.01, 0.001 accuracy 0.002 ph + 1 lsd calibration points up to 5 buffer sets: usa/ nist/ din/ custom orp range 2000.0 mv rel. mv range 2000.0 mv accuracy 0.2 mv resolution 0.1 mv ion concentration 0.001 to 19999 ppm resolution up to 3 digits relative accuracy 0.5 % full scale (monovalent) and 1 % full scale (divalent) calibration points up to 8 temperature range 0 to 100 c, 32 to 212 f resolution 0.1 accuracy 0.3 c/ 0.5 f compensation: auromatic temperature correction other requirement: auto buffer recognition, memory 500 with time and date stamp rs 232 alarm for calibration due & out of range alurm auto logging function., fluoride electrode of ion metersame make that of the ion meter, nitrate electrode of ion metersame make that of the ion meter, manifold filtration assembly (to be used for micobiological test)* sturdy and easy to clean ss filtration assembly with funnel, manifold unit, air vent filter and vaccum pump ready to be used for mictobiological testing * specification: # funnel with inbuilt clamp: made of ss 316, capacity: 300 ml, ss filter support base, ss support screan: 47 mm, made of ss 316l; filtration area 9.6 cm2; silicon stopper: size 8, with silicon lid and silicon o ring. # filtration manifold: 3 place manifold, made of ss 316, valves made of ptee, connection 12 mm; suitable for both pp and ss funnel with rubber stopper fittings. # vacuum pump: oil free, piston powered, suitable to be used with 3 possition manifold; max flow rate: 34 l/ min; vaccum stage: double. max vaccum: 100 mbar. the vaccum pump should also have a vacuum suction bottle to protect the pumps componennt by preventing liquid or solid material from entering the pump during filtration process., voltage stabilizer (3 phase)# capacity- 3 kva # input voltage range: 295 v - 465 v normal range # output voltage range 380 v / 400 v / 415 v # output regulation: 1 %; # output settability: 380 v - 420 v; # frequency: 47 hz - 53 hz; correction rate: 70 v/ sec; # aircooled servo stabilizer, three phase., heating mantle (single station) should have safety cut off with precise heating for boiling, evaporation, distillation or extraction process technial specification: flask capacity 250 ml, working temp range: ambiant + 5 to 350 degree celcius. accuracy: 1.0 degree celcius, display: led display with temperature, time; construction material: ms; power consumption : 150 w, semi automatic digestor for cod analysis with all assssories material of construction epoxy painted with chemical resistant coating; temperature range ambient to 450 deg c # stability of temperature 0.5 deg c # temperature calibration - automatic; selectable ramp: upto 4 per program; digestion time range: 1 to 999 minutes; time selection: 1 minutes steps; countdown: digital readout; heating places - 6 possition; size of tubes: 250 ml test tubes (42 mm); power 1000 w; number of programmable methods 20 numbers. # the thermal digestion unit should have high thermal homogeneity # the setup should have small footprint., digital thermometer with probe# mini lcd thermometer # type: digital, # sensor cable length: 1 meter water proof probe # batteries: 2 x batteries should be included, # temperature range: - 50 - 110 oc, # temperature measurement accuracy: 1 0c, micropippete stand#self-standing holder accommodates most major brands of pipettes. #material: pmma, # capacity: 5 pipptes/stand, conical flask draining rack#material: acrylonitrile-butadiene-styrene/polycarbonate, # no. of pegs: 20

State Government

CTN :41223793

17 Sep, 2025 19.40 Lacs

Kheda - Gujarat

Tender For corrigendum : work of anti-corrosive epoxy painting on various pipelines, tanks & structures etc. of various dm, cpu & pt plant auxiliaries of 800 mw unit-8 wtps on as & when required basis

Central Government And Public Sector

CTN :41693739

12 Sep, 2025 NA

Tinsukia - Assam

Tender For supply of hex head screw m12x25, as per drawing: is:1364(part-2)-2002,5.6, ce coating as per mdts-057, packing instruction-pi042. it should be ensured that item should not rub during transportation. make :- tvs / tuff / dfl / unbrako .

Central Government And Public Sector

CTN :41709728

09 Sep, 2025 NA

Bongaigaon - Assam

Tender For supply of (1) hex head bolt m20x100 high tensile. materials and specification as per is:1364 (part -1)- 2002, ce with property class 10.9 to is: 1367 (part -3)-2002 coating as per mdts-057 make:-tvs/tuff/dfl/unbrako(2) hex head screw m24x100 high tensile. materials and specification as per is:1364 (part -2)- 2002, ce with property class 10.9 to is: 1367 (part -3)-2002 coating as per mdts-057 packing instruction-pi042 make:-tvs/tuff/dfl/unbrako

Central Government/Public Sector

CTN :41502066

11 Sep, 2025 NA

Nabinagar - Bihar

Tender For corrigendum : supply of 300044434_ 10_ m0750990017_ tape, seal: anti corrosive tape, 150 mm , 300044434_ 20_ m0759005006_ primer, 15kg tin, is10221, 0.0- 0.5gms/cm3

Central Government / Public Sector

CTN :41673542

26 Sep, 2025 NA

Vijayawada - Andhra Pradesh

Tender For corrigendum : high tensile hex. head screw size: m12 x 30 x 1.75mm, grade: 8.8 as per is: 1364 part 2 with zinc coating.makes: lps/tvs/dfl/unbrako.note: ten samples should be got approved before effecting bulk supply.

Central Government / Public Sector

CTN :41498300

17 Sep, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of manual metal annual rate contract welding electrode, class-m1, type of coating-heavy, to drawing/specification irs: m-28/2020, code as per is: 5206/2013, size: 4 x 350 mm.

corporations/Associations/Others

CTN :41672354

23 Sep, 2025 NA

Kanpur - Uttar Pradesh

Tender For renovation and construction of shed and paver block work : - dismantling of old toilet block approx area 4 x6 sqm detail specification as per annexure a , clearing jungle of girth up to 50 cm measured at a height up to 3 m above ground level detail specification as per annexure a , earth work in excavation by mechanical means detail specification as per annexure a , demolishing brick work manually or by mechanical means detail specification as per annexure a , dismantling old plaster or skirting raking out joints and cleaning the surface for plaster at all height detail specification as per annexure a , removing and re fixing of m.s grill out side from middle wall to side wall including detail specification as per annexure a , providing and laying in position cement concrete of specified grade m 7 point 5 detail specification as per annexure a , 52 mm thick cc flooring with concrete hardener topping detail specification as per annexure a , p and f glass strips in joints of cement concrete floors detail specification as per annexure a , repairing of crack in flooring with help cement mortar with hardener and chemical detail specification as per annexure a , making plinth protection 50mm thick of cement concrete m1o detail specification as per annexure a , 15 mm cement plaster of mix 1 isto 4 cement coarse sand in wall and ceiling detail specification as per annexure a , repairing and maintenance of window with fabrication detail specification as per annexure a , repairing and maintenance of rolling shutter fabrication detail specification as per annexure a , repairing and maintenance of ms shutter fabrication of damaged work detail specification as per annexure a , renewing glass panes with putty and nails detail specification as per annexure a , clearing of roof by wire brush and joint of brick detail specification as per annexure a , providing and applying 20 mm thick water proof cement plaster detail specification as per annexure a , providing and laying in position specified grade of rcc m20 in foundation and up to plinth detail specification as per annexure a , providing and laying in position specified grade of rcc m20 in column detail specification as per annexure a , rcc work m20 in beams shelves chajjas lintels bands plain detail specification as per annexure a , centering and shuttering foundations footings bases of columns detail specification as per annexure a , centering and shuttering columns pillars piers abutments posts and struts detail specification as per annexure a , centering and shuttering lintels beams plinth beams girders detail specification as per annexure a , centering and shuttering suspended floors roofs landings balconies and access platform , steel reinforcement for rcc work including straightening cutting bending placing detail specification as per annexure a , brick work of class designation 7point5 in foundation and plinth cement mortar 1 isto 6 detail specification as per annexure a , brick work bricks of class designation 7point5 in superstructure above plinth level up to floor v cement mortar 1 isto 6 detail specification as per annexure a , half brick masonry bricks of class designation 7point5 in superstructure above plinth level up to floor v level cement mortar 1 isto 3 detail specification as per annexure a , structural steel work riveted bolted or welded in built up sections trusses and framed work detail specification as per annexure a , p and f precoated galvanised iron profile sheets zero point 5 mm total coated thickness with zinc coating 120 grams per sqm detail specification as per annexure a , 12 mm cement plaster of 1 isto 6 1 cement 6 coarse sand detail specification as per annexure a , 15 mm cement plaster of 1 isto 6 1 cement 6 coarse sand detail specification as per annexure a , cement plaster 1 isto 3 1 cement 3 coarse sand finished with a floating coat of neat cement detail specification as per annexure a , providing and laying integral cement based water proofing treatme

corporations/Associations/Others

CTN :41688364

13 Sep, 2025 NA

Kandla - Gujarat

Tender For supply of installation of new elwb at cfs kandla : : - rate for civil works for elwb foundation along with ramp using m25 grade rcc , rate for weatherproof junction box housing , rate for elwb earthing , rate for govt stamping and calibration charges on new weighbridge basis incl govt fees , rate for dismantling relocating reinstallation of elwb from rwc kandla to cfs kandla and rate for installation and commissioning charges at cfs kandla , rate for top surface painting with anti corrosive paint of best quality like berger or asian paints , rate for oiml approved digital loadcells ip68 , rate for digital indicator , rate for digital lc junction box , rate for power protection device , rate for hd usb keyboard , rate for elwb software , rate for amc of 02 years annual based

By Cities

By States

By Agencies

By Ownerships

By Sectors