Coating Tenders

CTN :43173654

23 Dec, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of civil work,surface of outdoor waiting shed,iron pole,acp sheet,stainless steel bench,epoxy paint,led lighting

CTN :40703094

15 Dec, 2025 NA

Hyderabad - Telangana

Tender For bid to ras corrigendum : supply of un-axial accelerometer , tri-axial accelerometer , shock accelerometer , low noise for un-axial accelerometer , low noise cables for tri-axial accelerometer , low noise tri-axial extension cables , cable for shock accelerometer , vibration isolator , extension connector , tri-axial strain sensors with invar material , tri-axial strain sensors with stainless steel material , biaxial strain sensors with stainless steel material , rtd temperature sensor , methyl methacrylate two- component adhesive , mild phosphoric -acid conditioner , ammonia-based conditioner neutralizer , strain gage adhesive kit , flux and rosin solvent kit , air-drying solvent -thinned acrylic , air-drying solvent -thinned xylene polyurethane , silicon conformal coating , protective coating , solvent degreaser , high temperature cement kit , fiber glass adhesive tape 1 h -class , gauge sponge , pressure sensing element pressure range-70bar , pressure sensing element pressure range-170bar

Central Government / Public Sector

CTN :43020032

20 Dec, 2025 NA

Kamrup - Assam

Tender For corrigendum : providing of custom bid for services - annual rate contract for internal protective coating of fire water/ cooling water piping at guwahati refinery, tender no-9010c25c27

State Government

CTN :43149098

18 Dec, 2025 4.40 Lacs

Mandi - Himachal Pradesh

Tender For r/m of rest house at hpsebl colony at sarabai for the year 2025-26 sub-head:- carrying out the repair work of roof by epoxy mortars/concrete for arresting leakage of hpsebl rest house sarabai.

CTN :43159739

22 Dec, 2025 3.12 Lacs

Faridabad - Haryana

Tender For providing epoxy flooring, epoxy wall paint, pvc false ceiling and other miscellaneous civil work in radiation safety laboratory at lg floor thsti building at ncr bsc faridabad

Central Government/Public Sector

CTN :43151722

15 Dec, 2025 NA

Rourkela - Odisha

Tender For epoxy based coating for walk way guide l(3items) comprising of following: 1 - sprinkle quartz f / floor tech sl , 2 - floortech sl,compres strength:650kg/cm2 , 3 - epoxy primer f / floortech sl ,

Central Government/Public Sector

CTN :43125681

31 Dec, 2025 NA

Katipala - Karnataka

Tender For providing of custom bid for services - mrpl tender 3900001934 for service code 1003007 scaffolding erection & dismantling as per attached boq bidder has to quote lumpsum amount including gst,custom bid for services - for service code 1025097 surface preparation by grit blasting as per attached boq bidder has to quote lumpsum amount including gst,custom bid for services - for service code 1003000 three coats of epoxy phenolic coating as per attached boq bidder has to quote lumpsum amount including gst

Central Government/Public Sector

CTN :43127526

31 Dec, 2025 NA

Katipala - Karnataka

Tender For custom bid for services - tender for annual rate contract for specialized works at mrpl as per boq and scope of work (bidder has to quote lumpsum price higher or lower than the sor value including gst); 1 1057794 providing and laying of 6 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 6mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm+wr+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 2 1057795 providing and laying of 4 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 4mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 3 1057796 providing and laying of 2 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 2mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 4 1057797 providing and laying of 6 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 5 1057798 providing and laying of 4 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 6 1057799 providing and laying of 2 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 7 1057810 supply and laying of 2 mm frp with general purpose glass and resin including primer as per tender and instructions of eic. 8 1057811 joints repair of existing ppg lining with thermoplastic chemical resistant ppg of 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining having tensile strength at yeild not less than 37.59 n/mm2,elongation yield- 25.2%,flexural modulus- 1522.5 n/mm2 and acid and alkaline resistance from ph value 2 to 14 and as per enclosed specification and as directed by eic 9 1016067 supply of thermoplastic chemical resistant ppg of 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining having tensile strength at yeild not less than 37.59 n/mm2,elongation yield- 25.2%,flexural modulus- 1522.5 n/mm2 and acid and alkaline resistance from ph value 2 to 14 and as per enclosed specification and as directed by eic 10 1016068 laying of thermoplastic chemical resistant ppg for 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining including removal of the exisiting lining,joining/welding etc all complete as per enclosed specification and directed by eic. 11 1028194 supply of 5 mm pp/frp prefabricated system where sheet will be of 5mm in black color with u.v. stabilizing agent. along with material for 5 mm thick frp lining (adhesive) i.e. resin, woven roving, csm and special additive(hsn code 70199090). and as directed by eic 12 1028195 laying of 5mm pp/frp prefabricated system where sheet will be of 5mm in black color with u.v. stabilizing agent. along with material for 5 mm thick frp lining (adhesive) i.e. resin, woven roving, csm and special additive(hsn code 70199090) 13 1057812 providing and applying of epoxy putty filling in irregularitie

State Government

CTN :43113236

05 Jan, 2026 17.27 Lacs

East Nimar - Madhya Pradesh

Tender For work contract for anti- corrosive, anti- abrasive polymeric epoxy coating on surface of condenser tube sheet and water box installed at unit 3, 2x660 mw, sstpp, mppgcl, dongalia.

Corporations And Associations And Others

CTN :43117081

17 Dec, 2025 67.97 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipments in najafgarh zone and central zone under mplads funds for various locations of parks in municipal corporation of delhi. - supply and installation of open gym equipments in najafgarh zone and central zone under mplads funds for various locations of parks in municipal corporation of delhi., seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)., cross trainer /elliptical exerciser dimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall b

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Corporations And Associations And Others