Condenser Tenders

Corporations/Associations/Others

CTN :40114492

09 May, 2025 NA

Beed - Maharashtra

Tender For supply electrical material for electrical department m.c. ambajogai dist beed - 1.5mm2 1/18 pvc wire 91 mtr, 2.5mm2 1/18 pvc wire 91 mtr, casing caping, 8 way switch board with cover plate, 16 way switch board with cover plate, 6 a 10 a switch, 16 a switch, ceiling fan 1400 mm, cabin fan 400 mm, cooler 55 ltr, 1.5 ton ac with compresser unit, electronic ding dong bell, 18 watt led bulp, 20 watt tube light with all fitting acessaroes, 3 pin plug 16 a, 3 pin plug 6 a, 2 pin socket 6 a, 3 pin socket, fan regulator, 36 watt tube light, condenser 2.5 micro farad, backlit type pendent holder, ding dong bell, batten holder for lamp fitting, 2 pole mcb 16 a-32 a, main switch box with 3 cutouts 16 a each, ceiling rose, cutout kitkat fuse 32 a, electrical insulation tape (box), gi wire, stay wire with stay set, rain coat, gum boot, hexa blade, earthing rod / plate, tube light inbuilt invertor 20 watt, exhaust fan 900 rpm, electric extension board 16a/ 20a with 5 socket, electric extension board 6 a with 4 socket, 2.5 mm2 al. service wire, 4 mm2 al. service wire, 6 mm2 al. service wire, 10 mm2 al. service wire, bell switch, 2 core 6mm2 armad cable, 4 core 10mm2 armad cable, 4 core 16mm2 armad cable, 4 core 25mm2 armad cable, 4 core 35mm2 armad cable, 4 core 50mm2 armad cable, 4 core 70mm2 armad cable, flood light 100 watt, flood light 50 watt, flood light 24 watt, flood light 200 watt, spmcb 32 a, kitkat 63 a, 10/16/25 mm2 al. lugs, 35 sqmm cu. lugs, 18 25 watt led street light, 46-100 watt led street light, 26 45 watt led street light, water heater 1200 watt, distill water for battery, psc pole, hand glous, led bulp up to 10 watt, incandescent lamp up to 100 watt, 200 watt incandescent lamp, soldering machine, driver for outdoor led up to 50 watt, driver for outdoor led up to 55-100 watt, driver for outdoor led up to 105-200 watt, ant conductor for street light phase with gi wire, gnat conductor for neutral, panel box iron body (for meter, timer, contactor, cutout setup, shackle lt insulator, pcb for led lights up to 50 watt, pcb for led lights up to 55-100 watt, electric flyer, electronic type cordless call bell, rubber patch, iron / still lock with chain, screw driver, spanner, cutter, street light bracket 40 mm dia. b class gi pipe 1 mtr in length with clamp & nut bolts, kitkat 100 a, tong tester, drilling machine, torch light with cells, 2500 va digital pur sine vave inverter single phase 230 volts 50 hz, 12 v / 180 ah tubuler battery, 35 sqmm single core copper wire, gi pipe a class 25 mm dia., street light timer, street light contactor 70 am, rsj pole 8 mtr, fan huke with fan clamp

Central Government / Public Sector

CTN :39927096

03 May, 2025 1.79 Crore

Panipat - Haryana

Tender For corrigendum : providing of custom bid for services - rprc253099 rate contract for hydrojet cleaning of hes or afcs or condensers tubes and equipments by hydrojet machine and rotomole machine at panipat refinery and petrochemical complex

State Government

CTN :40130277

10 May, 2025 7.00 Lacs

Katni - Madhya Pradesh

Tender For vidhut and other material supply at dist jail katni - led tube light complete branded, l.e.d. bulb 12 watt branded, l.e.d. bulb 09 watt branded, l.e.d. bulb 15 watt branded, l.e.d. light 24 watt branded, chargeable led bubble 09 watt, condenser 2 wire, copper wire 0.75 mm (90 meter per bundle) branded, copper wire 1 mm (90 meter per bundle) branded, copper wire 1.5 mm (90 meter per bundle) branded, copper wire 2 mm (90 meter per bundle) branded, copper wire 4 mm (90 meter per bundle) branded, cable (two-byer complete 10mm) branded, cable (three-byer complete 12mm) branded, chakki pat 16 - inch branded, chakki soft branded, chakki pulley branded, chakki patta (belt) branded, chakki dau bearing 0.6 no. branded, grease box of flour mill, flour mill belt, ceiling rose, cutout 63 a.m.p. in, cutout 100 a.m.p. in, electrical tape roll, tester branded, ceiling fan branded, grease branded, board sheet 10x12 branded, board sheet 8x10 branded, board sheet 7x4 branded, casing strip branded, board switch branded, board holder branded, fan regulator branded, 5 pin socket branded, 2 pin socket branded, plastic pipe black 2 inch 20 feet in branded, telephone wire 0.5 mm, telephone connection lead, telephone receiver lead, computer printer cartridge refill, photo coffee cartridge refill, watch cell branded, socket 2 inch, union 2 inch, elbow 2 inch, tee 2 inch, bulb inch, bulb 1 inch, chapra, motor starter, cement branded, sand, ballast, water tanker (5000 litres), photocopy paper a-4 size, pen, m.c.b 4 poll 63 amp, m.c.b 3 poll 63 amp, m.c.b 2 poll 32 amp, m.c.b 1 poll 16 amp, speaker unit dardfoam, condenser 150 mfd, condenser 100 mfd, led halogen (100 watt), 3 core cable 4 sq mm (100m), copper winding wire

State Government

CTN :40139009

01 May, 2025 NA

Chandrapur - Maharashtra

Tender For work of condenser tube cleaning by hydro-jetting followed by bullet shot method during annual overhaul unit-4, cstps, chandrapur.

corporations/Associations/Others

CTN :40133173

05 May, 2025 NA

Bardhaman - West Bengal

Tender For procurement of spares of edwards make condenser vacuum pumps for tg and aux., dstps, dvc - intermediate plate, part no. 042070n01 for condenser vacuum pump, model no. shr22500, make- edwards, intermediate plate, part no. 032070n01 for condenser vacuum pump, model no. shr22500, make- edwards., rotor drive set for condenser vacuum pump, model no.-shr22500, shaft sleeve, part no. 860070n01 for condenser vacuum pump, model no. shr22500, make- edwards., shaft,part no.-092250n01 for condenser vacuum pump, model no.-shr22500, bearing coller ring, part no.-32700000n1 for condenser vacuum pump,model no.shr22500, grease thrower de side, part no.-33.70.0000.n9a, for condenser vacuum pump,model no.shr22500, grease thrower nde side, part no.-34.70.0000.n9a for condenser vacuum pump,model no.shr22500

Central Government/Public Sector

CTN :40135096

16 May, 2025 NA

Katipala - Karnataka

Tender For supply of mr group a1 (item sl no. 01.003) supply of splitter overhead condenser , mr group a2 (item sl no. 01.001) supply of reactor effluent air cooler , mr group a3 (item sl no. 01.002; 01.004) supply of stripper condenser & greendiesel product cooler , mr group a1 (item sl no. 08.003) supervision of splitter overhead condenser , mr group a2 (item sl no. 08.001) supervision of reactor effluent air cooler , mr group a3 (item sl no. 08.002; 08.004) supervision of stripper condenser & green cooler

corporations/Associations/Others

CTN :40126145

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

corporations/Associations/Others

CTN :40126147

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

Central Government And Public Sector

CTN :40132552

06 May, 2025 NA

Bilaspur - Chhattisgarh

Tender For supply of condenser fan motor suitable for m/s sidwal

Central Government/Public Sector

CTN :40119105

15 May, 2025 NA

Khorda - Odisha

Tender For supply of b. o. d bottles , culture tubes round bottom, clear, with pp cap , filteration assembly ( glass funnel, filter support base, glass receiver flask, vaccum pump) , glass receiver flask for filteration assembly , reagent bottle, 125 ml , reagent bottle (amber) , 125 ml , watch glass, 100 mm , watch glass, 120 mm , watch glass, 150 mm , watch glass, 80 mm , aspirator bottle with stopcock , pipette stand vertical , separating funnel holder , vacuum trap kit , distilling apparatus( graham condenser, intercahngable joints and stopper)

By Cities

By States

By Agencies

By Ownerships

By Sectors