Condenser Tenders

Central Government And Public Sector

CTN :40132552

06 May, 2025 NA

Bilaspur - Chhattisgarh

Tender For supply of condenser fan motor suitable for m/s sidwal

Central Government/Public Sector

CTN :40135763

14 May, 2025 NA

Raigarh - Chhattisgarh

Tender For supply of filter , supply- ac and ventilation system- air intake louver , supply- ac and ventilation system- gravity damper , supply- ac and ventilation system- axial flow supply fans- 5500 cmh , supply- ac and ventilation system- axial flow exhaust fans with flp motor -7500 cmh , spares- ac and ventilation system -v-belt for ahu blower of each type , spares- ac and ventilation system -ahu blower bearings of each type , spares- ac and ventilation system -blower motor bearing for ahu , spares- ac and ventilation system -pre filter for ahu , spares- ac and ventilation system -fine filter for ahu , spares- ac and ventilation system -relative humidity sensors , spares- ac and ventilation system - geyserstat , spares-ac and ventilation system- local humidity temperature indicators , etc- ac and ventilation system- air cooled dx type condensing unit- minimum 33 tr actual capacity , etc- ac and ventilation system- air handling unit- ahu , etc- ac and ventilation system- fresh air fan assembly , etc- ac and ventilation system- split ac unit - 2 tr , etc- ac and ventilation system- strip heaters , etc- ac and ventilation system- pan humidifier , etc- ac and ventilation system- copper refrigerant piping- suction line , etc- ac and ventilation system- copper refrigerant piping-liquid line , etc- ac and ventilation system- refrigerant gas , etc- ac and ventilation system- gss duct sheet-24 g- air conditioning system , etc- ac and ventilation system- gss duct sheet-22 g- air conditioning system , etc- ac and ventilation system- gss duct sheet- 20 g- air conditioning system , etc- ac and ventilation system-gss duct sheet- 18 g- air conditioning system , etc- ac and ventilation system-non return damper , etc- ac and ventilation system-volume control damper , etc- ac and ventilation system- fire damper , etc- ac and ventilation system- motorised actuator for fire damper , etc- ac and ventilation system- grills diffusers , etc- ac and ventilation system- accoustic insulation , etc- ac and ventilation system- thermal insulation , etc- ac and ventilation system- dp switch , etc- ac and ventilation system- air flow switch , etc- ac and ventilation system- temperature cum rh sensor , etc- ac and ventilation system- fine filter , etc- ac and ventilation system- air intake louver , etc- ac and ventilation system-gravity damper , etc- ac and ventilation system- axial flow etc fans- 5500 cmh , etc- ac and ventilation system- axial flow exhaust fans with flp motor -7500 cmh , etc- ac and ventilation system-cable laying and termination alonwith lugs glands and any other accessories

Central Government/Public Sector

CTN :40122102

07 May, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of mpcb for condenser fan unit 1.1, 1.2, 2.1 & 2.2, thermal release range; rated current 1. 6-2.5 a, class 10, breaking capacity: 50ka, pole: 3p, rated voltage: 415vac confirming to rdso spec. no. rdsp/pe/spec/ac/0184-2015 (rev-0). [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :39927096

03 May, 2025 1.79 Crore

Panipat - Haryana

Tender For corrigendum : providing of custom bid for services - rprc253099 rate contract for hydrojet cleaning of hes or afcs or condensers tubes and equipments by hydrojet machine and rotomole machine at panipat refinery and petrochemical complex

Corporations/Associations/Others

CTN :40114492

09 May, 2025 NA

Beed - Maharashtra

Tender For supply electrical material for electrical department m.c. ambajogai dist beed - 1.5mm2 1/18 pvc wire 91 mtr, 2.5mm2 1/18 pvc wire 91 mtr, casing caping, 8 way switch board with cover plate, 16 way switch board with cover plate, 6 a 10 a switch, 16 a switch, ceiling fan 1400 mm, cabin fan 400 mm, cooler 55 ltr, 1.5 ton ac with compresser unit, electronic ding dong bell, 18 watt led bulp, 20 watt tube light with all fitting acessaroes, 3 pin plug 16 a, 3 pin plug 6 a, 2 pin socket 6 a, 3 pin socket, fan regulator, 36 watt tube light, condenser 2.5 micro farad, backlit type pendent holder, ding dong bell, batten holder for lamp fitting, 2 pole mcb 16 a-32 a, main switch box with 3 cutouts 16 a each, ceiling rose, cutout kitkat fuse 32 a, electrical insulation tape (box), gi wire, stay wire with stay set, rain coat, gum boot, hexa blade, earthing rod / plate, tube light inbuilt invertor 20 watt, exhaust fan 900 rpm, electric extension board 16a/ 20a with 5 socket, electric extension board 6 a with 4 socket, 2.5 mm2 al. service wire, 4 mm2 al. service wire, 6 mm2 al. service wire, 10 mm2 al. service wire, bell switch, 2 core 6mm2 armad cable, 4 core 10mm2 armad cable, 4 core 16mm2 armad cable, 4 core 25mm2 armad cable, 4 core 35mm2 armad cable, 4 core 50mm2 armad cable, 4 core 70mm2 armad cable, flood light 100 watt, flood light 50 watt, flood light 24 watt, flood light 200 watt, spmcb 32 a, kitkat 63 a, 10/16/25 mm2 al. lugs, 35 sqmm cu. lugs, 18 25 watt led street light, 46-100 watt led street light, 26 45 watt led street light, water heater 1200 watt, distill water for battery, psc pole, hand glous, led bulp up to 10 watt, incandescent lamp up to 100 watt, 200 watt incandescent lamp, soldering machine, driver for outdoor led up to 50 watt, driver for outdoor led up to 55-100 watt, driver for outdoor led up to 105-200 watt, ant conductor for street light phase with gi wire, gnat conductor for neutral, panel box iron body (for meter, timer, contactor, cutout setup, shackle lt insulator, pcb for led lights up to 50 watt, pcb for led lights up to 55-100 watt, electric flyer, electronic type cordless call bell, rubber patch, iron / still lock with chain, screw driver, spanner, cutter, street light bracket 40 mm dia. b class gi pipe 1 mtr in length with clamp & nut bolts, kitkat 100 a, tong tester, drilling machine, torch light with cells, 2500 va digital pur sine vave inverter single phase 230 volts 50 hz, 12 v / 180 ah tubuler battery, 35 sqmm single core copper wire, gi pipe a class 25 mm dia., street light timer, street light contactor 70 am, rsj pole 8 mtr, fan huke with fan clamp

corporations/Associations/Others

CTN :40126145

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

corporations/Associations/Others

CTN :40126147

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

State Government

CTN :40130277

10 May, 2025 7.00 Lacs

Katni - Madhya Pradesh

Tender For vidhut and other material supply at dist jail katni - led tube light complete branded, l.e.d. bulb 12 watt branded, l.e.d. bulb 09 watt branded, l.e.d. bulb 15 watt branded, l.e.d. light 24 watt branded, chargeable led bubble 09 watt, condenser 2 wire, copper wire 0.75 mm (90 meter per bundle) branded, copper wire 1 mm (90 meter per bundle) branded, copper wire 1.5 mm (90 meter per bundle) branded, copper wire 2 mm (90 meter per bundle) branded, copper wire 4 mm (90 meter per bundle) branded, cable (two-byer complete 10mm) branded, cable (three-byer complete 12mm) branded, chakki pat 16 - inch branded, chakki soft branded, chakki pulley branded, chakki patta (belt) branded, chakki dau bearing 0.6 no. branded, grease box of flour mill, flour mill belt, ceiling rose, cutout 63 a.m.p. in, cutout 100 a.m.p. in, electrical tape roll, tester branded, ceiling fan branded, grease branded, board sheet 10x12 branded, board sheet 8x10 branded, board sheet 7x4 branded, casing strip branded, board switch branded, board holder branded, fan regulator branded, 5 pin socket branded, 2 pin socket branded, plastic pipe black 2 inch 20 feet in branded, telephone wire 0.5 mm, telephone connection lead, telephone receiver lead, computer printer cartridge refill, photo coffee cartridge refill, watch cell branded, socket 2 inch, union 2 inch, elbow 2 inch, tee 2 inch, bulb inch, bulb 1 inch, chapra, motor starter, cement branded, sand, ballast, water tanker (5000 litres), photocopy paper a-4 size, pen, m.c.b 4 poll 63 amp, m.c.b 3 poll 63 amp, m.c.b 2 poll 32 amp, m.c.b 1 poll 16 amp, speaker unit dardfoam, condenser 150 mfd, condenser 100 mfd, led halogen (100 watt), 3 core cable 4 sq mm (100m), copper winding wire

CTN :40137485

26 May, 2025 NA

Vidisha - Madhya Pradesh

Tender For annual contract rate for supply of building electrical fitting material - supply of building electricals fitting materials, pvc insulated cable fr with copper multi strand conductor isi marked 2x2.5 mm, pvc insulated cable fr with copper multi strand conductor isi marked 2x4 mm, pvc insulated cable fr with copper multi strand conductor isi marked 2x1.5 mm, pvc insulated cable fr with copper multi strand conductor isi marked 1.0 mm, approved make electronic dimmer/requlator for fan 650w, approved make electronic dimmer/requlator for fan 1000w, ceiling fan (energy saver 50 w)-1200 mm sweep, ceiling fan (energy saver 50 w)-1400 mm sweep, approved make wall mounting fan complete with wall bracket ,canopy,blades,speed regulator 400 sweep, approved make fresh air fanac 230-250 volts 300 sweep, approved make exhaust fan heavy duty with mounting frame,blades ac230-250 300mm sweep 900 rpm, approved make exhaust fan heavy duty with mounting frame,blades ac230-250 380mm sweep 900 rpm, servicing & overhauling of cooler fan motor, pump including replacemnt of distribution & delivary pipes,pvc elbows, painting etc. as reqd. complete with nacessary material & labour including replacement of connection leads., cleaning,overhauling, servicingof ceiling /exhaust /wall bracket fanby applying grease & oil, including testing with mounting / hanging arrangement including replacement of saftypins, checknuts,locknut,nut bolts etc. making perfect allignment & refitting at site as required., rewinding of fans by copper enamelled wire of suitable gauge including all required material, insulation, varnishing,connection leads,oiling .greasing etc completewith testing including dismentalling& refitting of fan at site.scrap old material is not returnable to the department., providing & refilling of wood wool /khas pads of normal size cooler panels 3 nos includings craping of oldpaint,making surface even,painting withred oxideprimer & two coats of paint of required shade including fixingnew wiremesh complete, chemical servicing of window /split air conditioning unit 1.5tr /2tr capacity including cleaning of cooling &condensing units,filters,grills etc & all other parts oiling & greasing of fan motor testing of a.c unit etc, cleaning,overhauling, servicingof ceiling /exhaust /wall bracket fan by applying grease & oil, including testing with mounting / hanging arrangement including replacement of saftypins, checknuts,locknut,nut bolts etc. making perfect allignment & refitting at site as required., labour rateforpointwiringalight /fan/twincontrol light /socketout let on seperateboard / call bell point in (open) surface rigid steel conduit system., labour rateforpointwiringalight /fan/twincontrol light /socketout let onseperateboard/callbellpoint inrecessed/concealed rigidsteelconduit system., labour rateforpointwiringalight /fan/twincontrol light /socketout let on seperateboard / call bell point in (open) surface rigidpvcconduit system., labour rateforpointwiringalight /fan/twincontrol light /socketout let onseperateboard/callbellpoint inrecessed/concealed rigidpvcconduit system., labour rateforpointwiringapowerpoint inrecessed/concealed rigidsteel conduit system including labour for fixing earth continuity conductor ., labour rate for fixing rigid pvc conduit as per specification in recessed/concealed conduit wiring system.20mm, labour rate for drawingcables inexisting rigidsteel conduit ( surfaceor recessed/concealed ) "a" 2 wires -1 2.5 sq mm / 4 sq mm / 6 sq mm, xlpe insulated power cable (conformingis-7098 ) 1100 volt grade/heavy duty powerc unarmoured 2 core 6 sqmm, led of 1 to 3w each assembled on single mcpcb, having color temp 6500k & having 50000 burning hrs life with minimum @l70,led luminiare 1 x 1, 24w , 4-6.5k, led of 1 to 3w each assembled on single mcpcb, having color temp 6500k & having 50000 burning hrs life with minimum @l70,led luminiare 2 x 2, 36w, 4-6.5k, led luminiare 1x1, 24w p

State Government

CTN :40139009

01 May, 2025 NA

Chandrapur - Maharashtra

Tender For work of condenser tube cleaning by hydro-jetting followed by bullet shot method during annual overhaul unit-4, cstps, chandrapur.

By Cities

By States

By Agencies

By Ownerships

By Sectors