Diversified Power Plant Stores And Spares Tenders

Central Government/Public Sector

CTN :41401091

04 Sep, 2025 NA

Multi City - Multi State

Tender For supply of distributed power wireless control system (dpwcs) for three phase freightlocomotive with brake interface unit for ccb brake system only.

Central Government/Public Sector

CTN :41401092

04 Sep, 2025 NA

Multi City - Multi State

Tender For supply of distributed power wireless control system (dpwcs) for three phase freight locomotive with brake interface unit for e-70 brake system only.

Central Government/Public Sector

CTN :41400893

25 Aug, 2025 NA

Ambala - Haryana

Tender For supply of power contactor (with diode) for compressor unit cp 1.1, cp 1.2, cp 2.1 & cp 2.2 rated current: 32 ampere (at rated voltage & ac 3 utilization category) rated voltage 690v, main pole: 3 no aux. contact: 1 nc, control voltage: 110 v dc +/- 15% with surge suppressor conforming to rdso specs no. rdso/pe/spec/ac/0184-2015(rev -1)

State Government

CTN :41394657

18 Aug, 2025 2.50 Lacs

Udaipur - Rajasthan

Tender For supply of electric and different store items under city dn. i udaipur --, armored aluminum cable isi marked 4 core-25, , sqmm., , tpn switch (porcelain) units isi marked 200a/41, , pvc copper wire isi marked, , 1) 1.5 sqmm. (90 mt. per coil), , 1) 1.5 sqmm. (90 mt. per coil), , iii) 5.0 sqmm (100 mt. per coil), , pvc hose pipe:, , i) 1", , ii), , 1½", , iii) 2", , iv) 2½", , v) 3", , hrc fuse isi marked din type, , 1) 125 amp., , ii) 200 amp., , iii) 250 amp., , iv) 400 amp., , hrc fuse base isi marked, , 1) 250 a, , 400 a, , oil paper size, , ambari rope, , segment time switch having power reserve 24 ho, , dial dial segment with 15 minute switching, , coupling bolts, , coupling bolts 4" x 3", , coupling bolts 4" x 4", , coupling bolts ½" x 4", , c.t. operated square amp. meter isi marked, , mm 0 to 100 a, , c.t. operated square volt meter isi marked 96 m, , 0-600v, , copper lugs heavy duty (crimping type), , 1) 70 mm, , ii) 95 mm, , iii) 120 mm, , iv) 150 mm, , v) 300 mm, , 400mm, , g.m. gate valve 2" size isi marked, , particular, , g.m. non retum valve 2" isi marked, , asbestos gland packing 12mm hindustan composites, , asbestos gland packing 16mm hindustan composites, , mcb 100 amp. 4 pole 16ka hpl/havells make, , p.p. rope 12 mm dia for panghat pump sets, , supply of starter spares, , contractor complete, , mj3, , 25 amp., , spare kit, , mj1 14 amp., , mj2, , 20 amp., , m13, , 25 amp., , timer units, , t01, , electronic (w/o no-nc), , t02, , electronic (with no-nc), , mj series, , auxiliary block a04, , bch make starter spares, , mc305ana3j, , mc305ana3k, , citation m over loaded relay, , 6 to 9.30 amp., , 8.90 to 13.15 amp., , citation m over loaded relay, , mc305ana3l 13.20 to 20.00 amp., , mc305ana3m 17.40 to 22.50 amp., , mc305ana3n 22.00 to 30.00 amp., , coon, , non, , nin, , sp90ai, , sp90bi, , sp90ci 40 amp., , contractor nhd series 4 pole, , 16 amp., , 25 amp., , 40 amp., , spare contacts set for nhd, , 16 amp., , 25 amp., , auxillary contact block nhd, , cat no. bch contractor, , ce15kn3 73 amp. freedom series 415v., , ss9003500ao overloaded relay 9 to 14 amp. l&t mak, , ss9188800do -do-13 to 22 amp. l&t make, , ss90047 magnet coil 415 v for l&t make, , ss90983 contact kit for l&t mki, , contractor complete mki l&t, , contractor 200 amp. (ml-10) with control wiring 2 phase., , -do-70 amp. (ml-4), , switch fuse units 250 a, , contractor complete l&t, , ml-2, , contractor complete l&t, , ml-1.5, , particular, , contractor complete l&t, , ml-3, , star coil l&t ml-2, , overloads relay l&t ml-2 20 to 32 amp., , overload relay ct3 80 to 140 amp, , c.t operated olr l&t make 6 mc305 ανα 3 c 188 to 300 amp, , flexible copper wire cable 2.5 sqmm, , overload relay 135 to 270 amp bch make, , hrc fuse 315 amp, , contactor complete ml. 12 l&t make, , overload relay 28 to 42 amp. l&t make, , overload relay 66 to 110 amp. l&t make, , bch make contactor complete cat. no. ce 15f, 50 amp., , bch make contactor complete cat. no. ce 15f, 32 amp.

State Government

CTN :41333626

29 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen

State Government

CTN :41333627

29 Aug, 2025 1.47 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing advanced apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - ultra sonic pulse velocity testing instrument :-supplying ultra sonic pulse velocity testing instrument for non destructive testing (ndt) of hardened concrete to asses the quality of concrete in term of dense, homogeneity and uniformity. instrument shall also be capable of crack & void detection and elastic properties measurment of concrete. the apparatus for ultra sonic pulse velocity measurment shall consist electrical pulse generator, transducers in one pair, standard calibrator bar, amplifier, electronic timing device. performance requirement of apparatus shall be as under :-- transit time accuracy within - 1 % range- range of time - 20 s to 10 ms- referance specimen - two no. usually steel bars having pulse transit time 25 s to 100 ms with accuracy 0.2 s- transducer - one pair - piezo electric and magneto strictime type frequencies in between 10khz to 200 khz, contact type ultra sonic concrete tester range - upto 5 mtr. & 5 mtr. and aboveaccuracy - 100 nano second- power - 7.2 v (dc), rechargable bettary - oper. temperature - 0 to 500 c - resolution - 0.1 s- display - 128x64 graphic lcd - display response time - instantaneousstandard accessories :-1- 1 set of 7.2 v nicd cell2- probe cable 2 no. (4m each)3- transduces - 2 no. (50 mm dia, 60 khz)4- calibration block alongwith verification block with nabl traceability certificate5- cover /bag instrument shall meet requirements of is: 516(part-5/sec.-i) 2018, en 12504-1 & astm c 597. standards.the complete item shall be supplied as per direction of engineer in charge . rates are inlusive of all taxes ., rotational viscometer : supplying & installation of rotational viscometer of spring torque model for higher viscosities that specially designed for conducting high-temperature testing of ashphalt binders in compliance with astmd 4402/d4402m-23 and is: 73-2013,is :15462-2019 & is:17079-2019 .standards . it should be capable to determine viscosities of liquids. like oil, ashphalt & solvent etc.key feature of apparatus shall be as under :-precise temperatures control unit to ensure precise temp control and maintaining content & accurate testing temperatures.user friendly inter face to easy to use and display of accurate result.level indicators surface level indictors should be our both the temp control unit and the main unit to ensure equipment remain level.versatile spindle options capable of with standing the demanding condition of ashphalt testing., builtin micro printer for convenient result printing., automatic range calculation capable of automatic full scale range (fsr) calculation for 100 % viscosity with specific spindle and speed combination., window based software shall include window based software for creating viscometer vs temperatures course with test data continently stored ms excel., high-visibility lcb the lcb display features a white backlight for enhanced visibility and clarity.technical specifications of apparatus shall be as under :-rotation speed 0.1- 250 rpm, viscosity measurement range 100 cp to 64m cp, torque range high up to 57496 dyne.cm ( 5.749 mn.m) ,spindles set of large spindles as required, torque range 10%- 100% full -scale torque, measurement error: 1% (f s), temperature controlling range: up to 200 c, temperature controlling accuracy: 0.1 c, cubage of sample cylinder: 20ml, serial interface: rs232, working environment: ambient temperature: 15 c to 35 c, 85%, operating voltage: ac (220v 10%)v, 50hz, single phase, total power consumption: 200w, components included of apparatus shall be as under :- -head of viscometer -auxiliary controlling case (containing a temperature controller and a micro-printer), - thermo-electric heater, -spindles made of aisi 316l as per requirment with adaptor, -pen drive for pc software setupstand, external power supply connection cable, ins

Central Government/Public Sector

CTN :41400918

01 Sep, 2025 NA

Ajmer - Rajasthan

Tender For ac control panel for roof mounted a.c. package unit with two compressors perpackage with 110 v ac control supply to rdso specification no elps/spec/ac/04 (rev.3) or latest, withcontrol circuit and power circuit harness arrangement as per rev.2

State Government

CTN :40794807

20 Aug, 2025 6.91 Lacs

Surat - Gujarat

Tender For corrigendum : providing of operation and maintenance power house / power plant - work of complete servicing / overhauling/fault attending /repairing / checking and supply of spare of various types ofhoist and cranes of various locations of gbps, utran.

State Government

CTN :41146485

21 Aug, 2025 49.25 Lacs

Ukai - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - wt 4979 g tender for the strengthening work of conveyor gentry junction tower and crusher house of chp i and ii; power house equipment, strengthening work of conveyor ge..

State Government

CTN :41148106

21 Aug, 2025 31.26 Lacs

Ukai - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - wt 4977 g various routine and preventive maintenance works of conveyor system at coal handling plant i and ii tps ukai on as and when required basis chp 1 and 2; power h..

By Cities

By States

By Agencies

By Ownerships

By Sectors