Diversified Power Plant Stores And Spares Tenders

State Government

CTN :41385691

23 Aug, 2025 4.20 Lacs

Wayanad - Kerala

Tender For cost of purchase of miscellaneous equipments and instruments (diesel generator for power ) for veterinary emergency team under wayanad wildlife division

State Government

CTN :41333626

29 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen

State Government

CTN :41333627

29 Aug, 2025 1.47 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing advanced apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - ultra sonic pulse velocity testing instrument :-supplying ultra sonic pulse velocity testing instrument for non destructive testing (ndt) of hardened concrete to asses the quality of concrete in term of dense, homogeneity and uniformity. instrument shall also be capable of crack & void detection and elastic properties measurment of concrete. the apparatus for ultra sonic pulse velocity measurment shall consist electrical pulse generator, transducers in one pair, standard calibrator bar, amplifier, electronic timing device. performance requirement of apparatus shall be as under :-- transit time accuracy within - 1 % range- range of time - 20 s to 10 ms- referance specimen - two no. usually steel bars having pulse transit time 25 s to 100 ms with accuracy 0.2 s- transducer - one pair - piezo electric and magneto strictime type frequencies in between 10khz to 200 khz, contact type ultra sonic concrete tester range - upto 5 mtr. & 5 mtr. and aboveaccuracy - 100 nano second- power - 7.2 v (dc), rechargable bettary - oper. temperature - 0 to 500 c - resolution - 0.1 s- display - 128x64 graphic lcd - display response time - instantaneousstandard accessories :-1- 1 set of 7.2 v nicd cell2- probe cable 2 no. (4m each)3- transduces - 2 no. (50 mm dia, 60 khz)4- calibration block alongwith verification block with nabl traceability certificate5- cover /bag instrument shall meet requirements of is: 516(part-5/sec.-i) 2018, en 12504-1 & astm c 597. standards.the complete item shall be supplied as per direction of engineer in charge . rates are inlusive of all taxes ., rotational viscometer : supplying & installation of rotational viscometer of spring torque model for higher viscosities that specially designed for conducting high-temperature testing of ashphalt binders in compliance with astmd 4402/d4402m-23 and is: 73-2013,is :15462-2019 & is:17079-2019 .standards . it should be capable to determine viscosities of liquids. like oil, ashphalt & solvent etc.key feature of apparatus shall be as under :-precise temperatures control unit to ensure precise temp control and maintaining content & accurate testing temperatures.user friendly inter face to easy to use and display of accurate result.level indicators surface level indictors should be our both the temp control unit and the main unit to ensure equipment remain level.versatile spindle options capable of with standing the demanding condition of ashphalt testing., builtin micro printer for convenient result printing., automatic range calculation capable of automatic full scale range (fsr) calculation for 100 % viscosity with specific spindle and speed combination., window based software shall include window based software for creating viscometer vs temperatures course with test data continently stored ms excel., high-visibility lcb the lcb display features a white backlight for enhanced visibility and clarity.technical specifications of apparatus shall be as under :-rotation speed 0.1- 250 rpm, viscosity measurement range 100 cp to 64m cp, torque range high up to 57496 dyne.cm ( 5.749 mn.m) ,spindles set of large spindles as required, torque range 10%- 100% full -scale torque, measurement error: 1% (f s), temperature controlling range: up to 200 c, temperature controlling accuracy: 0.1 c, cubage of sample cylinder: 20ml, serial interface: rs232, working environment: ambient temperature: 15 c to 35 c, 85%, operating voltage: ac (220v 10%)v, 50hz, single phase, total power consumption: 200w, components included of apparatus shall be as under :- -head of viscometer -auxiliary controlling case (containing a temperature controller and a micro-printer), - thermo-electric heater, -spindles made of aisi 316l as per requirment with adaptor, -pen drive for pc software setupstand, external power supply connection cable, ins

State Government

CTN :41333620

29 Aug, 2025 41.38 Lacs

Bikaner - Rajasthan

Tender For corrigendum : purchase of various testing general apparatus (lab equipment) in quality control labs for all zone - flash and fire point apparatus: supply , installation & commissioning of pensky-martens closed & open tester electric operated apparatus for determination of flash & fire point of tar & bituminous material as per is:1209-2021 using method a,b & c . the complete apparatus and its accessories shall be supplied, which shall confirm as per is:1448 (part-21) -2012 /iso 2719-2002 & is: 1448 (part-66)-1969 (reaffirmed 2003) and the complete item shall be supplied as per direction of engineer in charge . the appartaus shall include :-brass or copper test cup capacity 50 ml. with tight fitting lid. stirring mechanism (motorized), flame application device with shutter , electrically heated base with adjustable heating rate (1 - 6 c per minute) , standard thermometer (0 to 370 c) , heavy duty stand with insulated housing with 3.0 metre power cord & power plug etc complete. rates are inlusive of all taxes ., vibrating machine with 7.06 cmx7.06 cm x7.06 cm cube moulds :-supplying , fixing and commissioning electric operated vibrating machine with mould confirming to is: 10080-1985 (reaffirmed 2004) which shall be capable for compaction of cement mortar cube required as per is:4031. the complete frame assembly shall consist of device to hold a 7.06 cm mould to feed the sample in a mould. vibrator shall be mounted over coiled spring to carry the cube mould and vibrations are developed by mean of a revolving eccentric shaft. instrument shall be fitted with belt guard. electric motor of any reputed company is driven by an endless belt running on a crowned pully on the vibrating machine. digital time shall be also be fitted with digital timer and switch for ease of operation.main key features & technical specification of machine & accessories shall be as under :-- frequency of vibration :- 12000 + 400 rpm- power supply :- 230 v , 50 hz , ac supply single phase- motor capacity :- min. 3/4 hp , 2800 rpm- cube mould for cement (6 nos with base plates ) :- as per is:10080, size 7.06 cm x 7.06 cm , weight of mould shall be 2.8 + 0.2 kg of msinstrument supply shall include standard sand gr.-i, ii & iii , cube mould , poking rod , mortar mixing plate , suitable power cord min. 3.0 mtr long with power plug etc. the complete item shall be supplied as per direction of engineer in charge . rates are inlusive of all taxes ., vicat needle apparatus :-supply of vicat apparatus complete set confirming to is:5513-1996 suitable for determining the consistency, setting time , soundness of cement & standard consistency as per is 4031. the apparatus shall consist of a metallic frame with movable rod carrying interchangeable attatchments , consistency plunger (polished brass having dia 10 + 0.05 mm, length 50 + 1 mm with lower edge flat) initial setting needle (dia 1.13 + 0.05 mm ) final setting needle (with annular collar ) and a conical mould (top diameter 70 0.5 mm, bottom diameter 80 0.5 mm, height 40 0.5 mm.) . the plunger assembly shall allow free vertical movement and include a graduated scale for measuring penetration depth . the apparatus shall be supplied with a glass base plate.apparatus shall include , gauging trowel, stopwatch, all accessories shall be supplied in a protective box and as per direction of engineer in charge .rates are inlusive of all taxes ., gi sieve set 45 cm.dia with lid & pan (complete set) :-supply of is sieve set for coarse aggregate having dia of 45cm made of gi sheet with seamless welding. each sieve should having rounded edges at top for safe operation. each sieve must be of tight fitting to each other. sieves set finishing & sizes shall comply is 460-2020 and as per direction of engineer in charge.rates are inlusive of all taxes . each set consists followings :-125mm, 100mm, 90mm, 80mm, 75mm, 63mm, 53mm, 50mm, 45mm, 40mm, 37.5mm, 31.5mm, 26.50mm, 25mm, 22.40mm, 2

State Government

CTN :41146485

21 Aug, 2025 49.25 Lacs

Ukai - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - wt 4979 g tender for the strengthening work of conveyor gentry junction tower and crusher house of chp i and ii; power house equipment, strengthening work of conveyor ge..

State Government

CTN :41148106

21 Aug, 2025 31.26 Lacs

Ukai - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - wt 4977 g various routine and preventive maintenance works of conveyor system at coal handling plant i and ii tps ukai on as and when required basis chp 1 and 2; power h..

State Government

CTN :40916300

26 Aug, 2025 13.58 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - coal plant section at thermal power plant; fabrication & erection of bunker surface; service provider

State Government

CTN :40979956

26 Aug, 2025 NA

Gandhinagar - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - thermal power station; power house equipment; service provider

Central Government/Public Sector

CTN :41395947

18 Aug, 2025 1.26 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - 1500 hrly routines on da no 4 make ms cummins model vta 28dm; power generators; buyer

Central Government/Public Sector

CTN :41407011

01 Sep, 2025 35.00 Lacs

Pithoragarh - Uttarakhand

Tender For ca no. cwe/hills/pgh/44 of 2025-2026 repair/replacement/improvement of ht distribution system and power supply equipments at devkatiya and pithoragarh under ge mes pithoragarh

By Cities

By States

By Agencies

By Ownerships

By Sectors