Duct Tenders

Corporations/Associations/Others

CTN :45723888

07 Jul, 2026 NA

Katol - Maharashtra

Tender For supplying materials for maintainance in water supply department for fy 2026-27 (as per daily requirement)- gi pipe (class b, isi marked), gi bend (class b, heavy, isi marked), submersible gi coupling (heavy class, isi marked), gi reducing socket (heavy), pvc pipe (6 kg/cm²), pvc pipe (25 kg/cm²), pvc pipe (10 kg/cm²), ci flanged valve (heavy), pvc fta (10 kg/cm²), pvc bend (6 kg/cm²), pvc reducing socket (heavy, 6 kg/cm²), ci df sluice valve (isi 780-1994, heavy duty), ci detachable joint (complete set), nut-bolt, pvc solution (kisan), packing rope, acc pipe (class 15, isi marked), ci pipe (la, isi marked), ci special fittings (isi marked), rubber sheet, lead, air valve (isi marked, 25 mm), ci saddle piece (150 mm & 25 mm), gate valve (heavy), pvc tee, gi nipple, pvc saddle, pvc elbow, nylon rope, torch, holiday daba, greece, lokhandi angle bar and strap, g.i.lokhandi chaddar, g.i. miter box, air duct, motor pipeline pressure clock, air whale middle ball, hose pipe, hose nipple, pvc end cap, football, football jeep, air wall cdm , p.v.c.m.t.a., g.i. coupling, pungali pana sat, alanki pana sat, ring and fit pana sat, screw nut, die frame, dye gulps, saw frame lokhandi, saw blade, hand drill machine, hand drill machine electric, drill machine beat, voice, water body and haat pampachi full body fitting, hand pump connecting rod, hand pump chain, hand pump upper wall set, hand pump socket, hand pump handle, hand pump head, hand pump bearing, hand pump reducer cap, hand pump bucket wiser, hand pump globe whale, hand pump axle pin, hand pump wiser, hand pump rubber titan, hand pump water tank, hand pump cylinder, g.i.pipe b class, lokhandi road, spindle, motor pump starter & material 3 phase motor pump company texmo aquatax helen openwell submersible motor pump, openwell monoblock motor pump, borewell submersible, 1 phase motorpump openwell submersible motor pump, openwell monoblock motor pump, starter, ltlk relay range, ltl timer coil and timer assembly, ltl insect point pocket, ltl relay 4 to 33, l.t.l.m.n.releche plastic button, ltl starter button knob, ltl simple, water sill, submersible motor bearing fiber cap, submersible bush, , , , old meter and ampere meter, old and ampere meter box compliant, monoblock motor pump coupler rubber bush, , , , , condenser capacitor mfd, , , , , , , , , , single phase auto switch lcb ampere 16 to 20, 3 phase auto lcb 17 to 20, 3 phase e.l.c.d. ampere 16 to 32, capacitor, , , , , , ltl auto switch 200 amps, wire, , , , , , , cable, , , , auto wire bundle, kit kat, , , , , , switch khosla 15 amp, plug khosla 15 ampere, pvc tape roll bundle, water supply joint tape roll bundle, rubber gasket 3'' 4'' 6'', everyday sale daba (20 nos.), g.i. tap, , , , snoring, wire brush, c.i.pipe, , , , , c.i.mechanical bend, , , , , c.i.mechanical t, , , , , p.v.c. adapter (tail piece), , , , , si. income. mechanical joint, , , , , tikas danda, spade stick, plastic bucket, lokhandi bucket, rubber titan, rubber gasket, g.i.wire, g.i.elbow, , , , , g.i.union, , , , , plasto syntex talkie, 4 coats with finish, , , , finolex pipe, , , , , , , , water meter, , , ferrule plate, , , , control panel star delta 14 to 31 amp, control panel single phase 5 to 21 ampere, m.sil. packet 100 grams, bean coke, monkey pliers, cannes, , , pvc m.t.a., , , , , , , , , , , lokhandi vicere, rabari vicere, rubber titan , get pipe range, , , , , , nut bolt 4 sut x 3'', nut bolt 4 sut x 5'', g.i. nipple, , , , , , , , , , , lock, small per piece, big per piece, getting a bandage, , , , , , , , , , , find peace, , , , , , , , , , , , , , g.i. elbow, 1 inch, 1/2 inch, 3/4 inch, 1 1/2 inches, 2 1/2 inches, 2 inches, 3 inches, 4 inches, 5 inches, 6 inches, ,-s.t.m. pipe, , , , , , e.s.t.m. tea, , , , , , e.s.t.m. elbow, , , , , , , , , , , , e.s.t.m. reducer, , , , , , e.s.t.m. brass threaded tee, , , , , , e.s.t.m. brass threaded elbow, , , , , , e.s.t.m. brass threaded socket, , , , , , e.s.t.m. brass threaded reducer, , , , , , ,p-m

Central Government/Public Sector

CTN :45715816

20 Jul, 2026 NA

Kamrup - Assam

Tender For providing of repair and overhauling service - ductable air conditioner (dfm); blue star; yes; service provider premises, buyer premises

Central Government/Public Sector

CTN :45730429

20 Jul, 2026 NA

Mumbai - Maharashtra

Tender For comprehensive maintenance contract for ss2/ss3 repairs of rmpu's in lhb ac coaches alongwith robotic ac duct cleaning.

Central Government/Public Sector

CTN :45618802

06 Jul, 2026 NA

Jodhpur - Rajasthan

Tender For corrigendum : supply of corrugated flexible ducting for machine room ventilation as per clw drawing no. 1209-11.344-051 alt1 or latest. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45527664

14 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - thermal power plant; work of cleaning maintenance and overhauling of various lt mcc generator phase and neutral links generator bus duct excitation transformer lavt and..

State Government

CTN :45527861

14 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - thermal power plant; work of replacement refitting of 220 kv switchyard equipments for testing and cleaning of bus ducts at tps gandhinagar; service provider

Co-operative

CTN :45604524

07 Jul, 2026 20.00 Lacs

Jind - Haryana

Tender For corrigendum : supply of ms (is20620) self supported boiler chimney with ducting and band of boiler no. (ha-156)

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

Central Government/Public Sector

CTN :45714895

18 Jul, 2026 NA

Pune - Maharashtra

Tender For special repairs to lt panels and connected items at pyro, pinaka, nag mixture building, magazine area and ap building in hemrl, pune - taking out old serviceable/unserviceable lt panel/capacitor panel of any description or capacity keeping aside in safe custody for schedule of credit complete all as specified and directed, supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 nos, (c) mccb 4p, 125 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 200/5 - 04 nos, (e) control mcb c curve, sp, 6 to 32a, 10ka, c curve - 02 nos, (f) led phase indicator (r,y & b) - 01 set. (pyro sub stn), supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (c) mccb 4p, 315 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) mccb 4p, 250 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 nos (e) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 800/5 - 04 nos, (e) con

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

By Cities

By States

By Agencies

By Ownerships

By Sectors