Fabric Tenders

CTN :40134775

16 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For custom bid for services - 2 years so for isbl piping jobs-1) pre-fab : fillet j, pre-fab : butt joint (cs), pre-fab : rf pad cs weld joints, pre-fab: corrosion pad cs weld joints, pre-fab: corrosion pad (cs) with shoe, pre-fab: fillet joint (alloy steel) tig, pre-fab: fillet joint (ss) tig, pre-fab: fillet joint (dss/sdss) tig, pre-fab: fillet joint (inconel/monel) ti, pre-fab: butt joint (alloy steel), pre-fab: butt joint (ss), pre-fab: butt joint (dss/sdss), pre-fab: butt joint (inconel/monel), field: fillet joint (cs) tig, field: butt joint (cs), field: rf pad cs weld joints, field: corrosion pad cs weld joints, field: corrosion pad (cs) with shoe supp, field: butt joint (ss), field: butt joint (alloy steel), field: butt joint (dss/sdss), field: butt joint (inconel/monel), pre-fab : rf pad as weld joints, pre-fab : rf pad ss weld joints, pre-fab: corrosion pad ss weld joints, pre-fab: corrosion pad as weld joints, pre-fab: corrosion pad (ss) with shoe, pre-fab: corrosion pad (as) with shoe, field: corrosion pad ss weld joints, field: corrosion pad as weld joints, field: rf pad ss weld joints, field: rf pad as weld joints, field: corrosion pad (ss) with shoe supp, field: corrosion pad (as) with shoe supp, overlay patch - cs-upto 6mm thick, overlay patch - as/ss-upto 6mm thick, overlay patch - inconel/monel-upto 6mm t, inlay patch - cs - upto 6mm thick, inlay patch - as/ss - upto 6mm thick, inlay patch - inconel/monel - upto 6mm t, weld run - cs (tig), weld run - cs (arc), weld run - with ss/as electrodes, weld run - with ss/as filler, weld run - with dss/sdss filler, weld run - with dss/sdss electrodes, weld run - with monel/inconel filler, weld run - with inconel/monel electrodes, non-pressurized piping welding joint, bending of plate for patch welding jobs , hot bending of pipe/tube below 1.5" dia, cold bending of pipes/tube below 1.5" di, rolling of plate into pipe, replacement of structural beams/columns , replacement of structurals-angles flats , replacement of grating/chequer plate (by, replacment of gratings (with welding), pipe clamp fabrication, blind fabrication, plate flange fabrication, welding of pin holes/spot welding (excep, fabrication of sample cooler coil n repl, dp test(piping), dp test(other than piping), dp test - surface area/tube sheet, mobilization of closed proximity radiogr, radiography upto 1.5" dia. - rate applic, radiography - above 1.5" dia. and upto 3, radiography - above 3" dia. and upto 6" , radiography (above 6"), radiography(other than piping), stress relieving upto 1.5" dia. - applic, stress relieving above 1.5" and upto 3" , sr - (above 3"), sr (other than piping), mobilisation of wfmpt/ufdt equipment wit, wfmpt, ufdt, mobilization charges for digital radiogr, hardness test, replacement of hexmesh (shell connected , replacement of hex mesh (inside cyclones, manual cleaning of piping/eqpt, copper slag / grit blasting, painting of zinc silicate, painting of zinc phosphate, hiring of mobile crane, supply and operation of tractor trailer, supply and operation of jeep/pick-up tru, hiring of air compressor - weekly, running hour rate for air compressor, supply and operation of diesel de-wateri, blind removal/installation, threaded fittings, valve - dropping/ installation, insulation removal, hydro test of pipelines, system scaffolding - rate per block 2.5m, manway opening/box-up, cold cutting of pipelines, bolts cutting with hacksaw/grinding/gas , chipping - rcc/ refractory, chipping - pcc, pcc - 1:4:8 ratio, pcc - 1:1.5:3 ratio, rcc of 1:1.5:3 ratio, excavation and back filling, provision of concrete box to arrest leak, replacement of ss anchors, replacement of cs anchors, replacement of inconel anchors, unplugging as per operation, tech data entry services, addtnl hrs : tech data entry srvcs, cs welding crew at workshop/fabrication , cs welding crew at unit/site, cutting crew (gas cutter/grinder), rigging crew, ss/monel/inconel welding crew at unit/si, ss/as/monel/inconel welding crew at shop

CTN :40134862

10 May, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of fabric nylon 136 gm ud width 110+ /-1 cm

CTN :40135648

16 May, 2025 NA

Agra - Uttar Pradesh

Tender For supply of nylon film laminated nylon fabric, 100gsm, 35 kgf/5cm bs

CTN :40129749

05 May, 2025 50.00 Lacs

Alwar - Rajasthan

Tender For supply for dual desk in model school - dual desk, the product should be in complete knock down structure as much as possible/feasible enabling ease in transportation and assemblies within classrooms.the panels are made from 18 0.5mm thk pre-laminated mdf ( is 14587) with 2 mm pvc edge banding on all sides.top dimension shall be 1048 x 378mm. top height shall be 750mm. seat dimension shall be 1048 x 335mm. seat height shall be 437mm. back dimensions shall be 1048 x 265mm. size may vary +/- 5mm. the under structure is made of erw tubes[is 7138] 25.4 0.3mm x 25.4 0.3mm x1.2 0.096mm thk powder coated 50microns( 10) at base which are welded to the desk and seat supports that are made of ms c sections 29+/-0.3mm x 24.9+/-0.3mm x 1.2+/-0.096mm thick powder coated 50microns ( 10). stiffeners that are provided between the 2 vertical frames at base and back of seat are made from erw tubes[is 7138] 25.4 0.3mm x 25.4 0.3mm x1.2 0.096mm thk powder coated 50microns ( 10). the tubes are closed with plastic caps. additional horizontal supports of erw tubes[is 7138] 25.4 0.3mm x 25.4 0.3mm x1.2 0.096mm thk powder coated 50microns ( 10) are placed between front legs and between back legs to add the rigidity of the structure. the storage shelves are made from 0.6 0.09mm thk powder coated 50microns( 10) ms sheet which is affixed below the desk top. hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles. they are made from 6.0 mm dia ms rods powder coated 50microns ( 10) the under structure is assembled using m5 trilobulartaptite screws. nylon studs are provided on bottom side of rh/lh frame. all fabricated parts which require welding are mig / spot welded. the screw joining wooden panels to under structure are chip board screws. all steel structural components shall be made from virgin material and tested conforming to is: 513/ is: 10748/ is: 2062/ is: 7138. recycled steel will not be accepted. top understructure 960mm (w) x 310mm(d). back panel support 960mm(w) x 325mm(h). seat support 960mm(w) x 280mm(d). 3d view is as under:-

CTN :40133943

01 May, 2025 2.89 Lacs

Hisar - Haryana

Tender For mayyar, hisar1, supplying and installation of gym equipment (mp) (rt) - mayyar, hisar1, supplying and installation of gym equipment (mp), multy gym six station (leg pull, leg curl with leg extension, biceps with trlceps, pec dee fly):-consists of 4 weighted stations and z light stations: and it is omhinalion of 8 type of excerslce thls is macle up of mainly olympic rectangular pipe of 4 x2 with 2.15mm thickness with steel twisted wire with pvc/nyioncoated cable5mm-6mm: with pvc coated weight plates for noiseless working/ movements, weight plates stack moves/slides in stainless steel pipes for smooth and noiseless movement throughout lifespan of equipments, ball bearing mouted fibre/pvcpullys, heavy ct shion padding on 12mm plys with special non abrasive fabric nontearing tauric.each weight stackis 7skg sheavy., functional trainer mechine :-all pipes made up size 2 x4 of hot rolled hollow rectangular ms pipe with size 193x100x230 cm and powder coated using akzo nobel or equivalent of 80-120 micron thick. all welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber. padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly. bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to be fitted within built limiters to prevent unwanted movements. all open ends of pipe to be coloured by gi/lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m25 and j shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc., superior olympic bench incline :-(made up of mainly olympic rectangular pipe of 4 x2 approx.:more nearest to approx. 163x165x137 cm with 2.15mm thickness, heavy cushion padding on 12mm plys with special non abrasive fabric non tearing fabric. with two vertical pipes have clamp forresting rodonit,used for doing incline level pattern chest press at one fixed incline level)., heavy olympic weight plates stand/rack in tree shape :-(made up of mainly olympic rectangular pipe of 4 x2 approx.:more nearest to approx.96x63x120 cm with 2.15mm thickness, with 6 round pipes welded { 3 pipes on each side}on which weigh plates are hanged/holded), heavy dumbells stand/rackin double platform :-(made up of mainly olympic rectangular pipe of 4 x2 approx.:more nearest to approx.209x81x83 cm with 2.15mm thickness, with angleiron welded with flat patti with rubber pasted on which dumbbell srestonit,two platform/ shelves), dumble 250 kg. (20,15,10,5,2.5)made from high quality rubber.tear proof, soundless and bouncy effect., plates 250kg (20,15,10,5,2.5)made from high quality rubber.tear proof, soundless and bouncy effect, rods 7f/3 and 3f/2 =27f, rod stand, providing and designing and fixing leg press size 153x137x152cm fabricated with 2`x4` recangular hollow pipe complete all respect., arm wheel: providing ,designing and fixing arm wheel in a pair of size 850x800x1800 mm, superior olympic bench flat: ( made up of mainly olympic rectangular pipe of 4`x2` approximate : more nearst to approx. 170x 168x137 cm with 2.15 mm thickness,heavy cusion pedding on 12 mm plys with special non-abresive fabrc etc., superior olympic bench decline:-made up of mainly olympic retangular pipe of 4`x2` approx.: more nearest to 210x166x137 cm with 2.15 mm thickness etc., spare flat bench for dumbbell

Central Government/Public Sector

CTN :40122769

01 May, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of closed hight : 20 feet , extended hight : 35 feet , aluminium wall extension ladder manufactured from aluminium c - section of 67 mm(l) x 31 mm(w) x 3.5 mm(t) confirming to he- 30 gr ade t - 6 temper as per is: 733 and aluminium 25.4 mm diameter round corrugated step placed at 305 mm distance center to center with aluminium lm - 6 catcher to lock ladder at every rung , nylon rope and pulle y. overall width of ladder 530 mm. ladder fabricated by expanding and flaring runs with stiles of the ladder for 100 % twist proof and unbreakable performance. make- skyward or sumer or s j ladders or similar [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40123006

05 May, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of hog rings often used to attach automotive upholstery fabric to the foam and frame of the seat. [ warranty period: 12 months after the date of delivery ]

CTN :40097491

05 May, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of fabric nylon 190 gsm undyed

CTN :40091129

13 May, 2025 NA

Kolkata - West Bengal

Tender For supply of surgicel fibrillar, 2 inch x 4inch box of 10 , prolene polypropylene size no 1 40mm cutting needle , size 3 0 70cm 1 slace 2 circle round body 20 mm violet polydioxanone pds ii box of 12 , xenon spare lamp 300 watt, 15 volt , 33 mm haemorrhoid 3 point 5 staple , 5mm lap clip applicator preloaded 20 clips , absorbable pgla 5mm mesh fixation device 15 to 30 tacks , absorbable suture coated polyglycolic 910 size no 1, 70 to 90 cms,rb , dressing opsite small port dressing box of 100 , hydrofiber dressing 9x10 cm , laparoscopic curved metzenbaum scissors with multifunctional handle 3mm, 29 cm length , laparoscopic drape kit consisting of laparoscopic drape with instrument pouch and tube holder , laparoscopic monopolar connecting cable with single pin , laparoscopic multiclip applier 05 mm preloaded 20 to 30 clips disposable , laparoscopic multiclip applier 10mm preloaded 20 to 30 clips disposable , laparoscopic self righting needle holder ss , laparotomy drape 100 x72x120 inch sterile with adhesive incise area 20 cm 33 cm, control plus fabric reinforcement tube holders m armboard cover and cautery bag surgiwear , loop ethilon no 1 , loop pds 40mm 1slace2 circle rb heavy no 1 , monofilament nylon non absorbable suture, size 2 0, 39mm, 3 slace 8 circle reverse cutting, 75cm, black in colour , multilayer tissue separating composite mesh of pdsii, polypropylene and oxidized regenerated cellulose size 15 x 15cm , multilayer tissue separating composite mesh of pdsii, polypropylene and oxidized regenerated cellulose size 15 x20cm , multilayer foam dressing with silicone adhesive size 5 point 5 x 12 cm , operation theatre drape set , pulv parasafe jar 810gm , sxmd 1b48 stratafix spiral pga pcl knotless barbed tissue control device 2 0 36mm 45cm 1 slace 2 circle tip unidirectional box of 12 , sxmd 1b48 stratafix spiral pga pcl knotless barbed tissue control device 3 0 36mm 45cm 1 slace 2 circle tip unidirectional box of 12 , laparoscopic graspers with ratchet handle 5mm, disposable , skin staples 35 staples per unit , polypropylene mesh 15 x 15 cms,mesh prosthesis for hernia medium slace polypropylene mesh, size 15cms x15 cms point composite light weight mesh , polypropylene mesh 30 cms x 30cms,mesh prosthesis for hernia medium slace polypropylene mesh, size 30cms x 30 cms point composite light weight , laparoscopic anti fog kit , antibacterial triclosan coated polyglactin 910, a 1 slace2 circle round body, 30mm, 90cm, size 2 0 vicryl , bipolar cautery cord compatible with valleylab bipolar forceps and ft10 generator e 0512, cord 3 point 6m slace 12ft , antibacterial triclosan impregnated polydioxanone loop suture,size 1,suture length 150cm, a 1 slace 2 circle heavy taper point round body steel alloy needle size 48mm, box of 24 foils , disposable monopolar cautery handpiece , multiclip applier preloaded for open surgery size large , multiclip applier preloaded for open surgery size medium , multiclip applier preloaded for open surgery size small , multilayer tissue separating composite mesh, poliglecaprone 25, polydioxanone and macroporous polypropylene, 20 x 25cm , closed system fecal management device for managing fecal incontinence slace diarrhoea and managing moisture associated skin dermatitis , circumcision stapler , opsite dressing for postop wounds 6 point 5 x 5 point 0 cm , aerosol spray for surgical instruments lubrication does not interfere in autoclaving process, bottle of 500ml , thermoshield extreme mild alkaline enzymatic cleaner for surgical instruments ph greater than10,with ce mark , high level sporicidal non toxic powder concentrate each , endo gia 45 mm reloads leg length 3 point 5mm compatible with endo gia universal stapler , endo gia 60 mm medium thick reloads with tri staple technology compatible with endo gia universal stapler , polydioxanone size 1, 90 cms,1 slace 2 circle needle 40 to 45 mm

CTN :39971445

02 May, 2025 NA

Vadodara - Gujarat

Tender For corrigendum : custom bid for services - refurbishment of volvo make passenger coaches at vadodara-1 remove old flooring and replace new flooring, repair wheel chair ramp, aluminum beading, flooring plywood & vinyl & apply anti-corrosion paint to the flooring base structure to prevent rusting (marine plywood 16mm, vinyl thickness: 2mm, color: red vinyl mastic chips design/ sparkling type) sample needs to be approved before applying 2 remove & refit all passenger cabin handrails after powder coating (color red glossy). 3 remove & refit of all passenger and driver seats, including replacement of upholstery. (rexine fabric /sample needs to be approved before applying, color plan brown) 4 replace all passenger door rubbers biddings and door setting for proper opening /closing. 5 replacement of driver cabin fabrics and side bar fabrics material (color red) sample needs to be approved before applies 6 clean interior topside rexine cover (internal roof) with machine cleaning & also clean handgrips, glass etc., steering cover replaced with new. 7 replacement of handgrip handles..

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector