Get complete information related to latest Fabric Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Fabric Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Fabric Tenders.
Tender For procurement of hardware items for day to day maintenance of various tube wells installed in 185 and 186 under okhla constituency ac-54. - supply of tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged of size (120 mm dia.) of gi pipe.make of pipe:- tata / jindal(a) 50mm dia., (b) 40mm dia., supply of ms clamp of 600 mm length duly fabricated form 12.5 mm thick 75 mm wide m.s. plate for holding the g.i pipe of sizes:(a) 50mm dia., (b) 40mm dia, fabrication and supply of g.i. 90 bend having flange at both ends (heavy duty). of following sizes:(a) 50mm dia., (b) 40mm dia., fabrication and supply of bore cover approx size lx1 made out from 6mm thick m.s. sheet in 2 halves & a circular hole in centre 3-1/2" dia. with locking arrangement by nuts & bolt., supply of ms full threaded nut bolts off sizes., supply of rubber packing (a) 50mm dia flange, (b) 40mm dia flange
Tender For sic of submersible pump set and all allied e/m equipment for rebored tube well near h.no.-116c shahpur jat in greater kailash constituency ac-50. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 10 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point:200 lpm on 90 mtr. head. having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved make, supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted.a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no.b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 noc) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no.e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable bankingg) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos. complete wiring & installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated & pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs.make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., s/o nut & bolts of 1/2 dia of different size i.e. 1.5 dia& 2.5 long full threaded., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 8-10 inch diameter made out from 6mm thick m.s. sheet in 2 halves & a circular hole in centre 3-1/2 dia. with locking arrangement by nuts & bolt., earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.
Tender For procurement of hardware items for day to day maintenance of various tube wells installed in ward no-180 and 181 under badarpur constituency ac-53. - supply of tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged of size (120 mm dia.) of gi pipe.make of pipe:- tata / jindal50mm dia., supply of tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged of size (120 mm dia.) of gi pipe.make of pipe:- tata / jindal 40mm dia., supply of ms clamp of 600 mm length duly fabricated form 12.5 mm thick 75 mm wide m.s. plate for holding the g.i pipe of sizes:50mm dia., supply of ms clamp of 600 mm length duly fabricated form 12.5 mm thick 75 mm wide m.s. plate for holding the g.i pipe of sizes: 40mm dia., fabrication and supply of g.i. 90 bend having flange at both ends (heavy duty). of following sizes:50mm dia., fabrication and supply of g.i. 90 bend having flange at both ends (heavy duty). of following sizes: 40mm dia., fabrication and supply of bore cover approx size lx1 made out from 6mm thick m.s. sheet in 2 halves & a circular hole in centre 3-1/2" dia. with locking arrangement by nuts & bolt., supply of ms full threaded nut bolts of sizes., supply of rubber packing 50 mm dia pipe flange, supply of rubber packing 40 mm dia pipe flange
Tender For providing of custom bid for services - fabrication of monkey ladder and removal providing and fixing of asbestos cement roof sheet at approximate height of upto 40meters approx at gujarat copper project
Tender For supply of supply, installation, testing and commissioning of chilled water double skin type horizontal vertical air handling units,supplying and fixing 200mm dia chilled water piping,supplying and fixing 150mm dia chilled water piping,supplying and fixing 100mm dia chilled water piping,supplying and fixing 80mm dia chilled water piping,supplying and fixing 65mm dia chilled water piping,supplying and fixing 200mm dia butterfly valve,supplying and fixing 100mm dia butterfly valve,supplying and fixing 80mm dia butterfly valve,supplying and fixing 65mm dia butterfly valve,supplying and fixing 65mm dia balancing valve,supplying and fixing 80mm dia y strainer,providing and fixing the industrial type pressure gauge,providing and fixing the mercury in glass industrial type thermometer,providing and fixing the air vent for automatic purging,sitc of zero point63 mm thickness sheet site fabricated gss sheet metal ducting,sitc of zero point80 mm thickness sheet site fabricated gss sheet metal ducting,sitc of 1 mm thickness sheet site fabricated gss sheet metal ducting,sitc
Tender For corrigendum : tender for supply of tufnol plate markelon glass sheet nylon round bar polycarbonate sheet : : - tufnol plate please see detailed specification in pdf file , markelon glass sheet please see detailed specification in pdf file , nylon round bar please see detailed specification in pdf file , fabric sheet please see detailed specification in pdf file , polycarbonate sheet please see detailed specification in pdf file
Tender For supply of insect net cover,shade net cover for net house roof 125 gsm,aluminum profile as per requirement,zinc coated spring for aluminum profile,frp gate,double laminated skirting fabric 160 gsm of 1.5 mtr width n.s item,providing and fixing g i pipes hollow tubular pipe as per requirement 12 kg per 6 metre,sliding aluminium shade net with accessories shade factor of 50 percent,hdpe or pp weed mat minimum 125 gsm cutting to size and shape,3 mm gi wire for cross supporting of roof and laying of aluminium shade net,pvc and cpvc pipe and fittings
Tender For bid to ras bid to ras corrigendum : supply of accessories for installation of insulation : - flame retardant fiberglass tape polyken 297 equivalent width 76mm tech spec. as per attached annexure a. , aluminium self adhesive reinforced tape equivalent width 100mm tech spec. as per attached annexure b. , glass fabric cloth 0.3mm thick and 385g m2 tech spec. as per attached annexure c , herring bone tape 34t electrical purpose tech spec. as per attached annexure d. , madapolam fabric one colored art.303 width 900mm tech spec. as per attached annexure e. , capron thread for industrial fabrics polyamide thread tech spec. as per attached annexure f. , perforated sheet am g 1.5mmx1200mmx2500mm tech spec. as per attached annexure g.
Tender For supplying of fabricated view cutter made up of ms frame hollow section pipe and covered the frame with ms sheet at different location of c d waste sites under the jurisdiction of division m-iii/central zone.