Foundation Tenders

State Government

CTN :43908329

13 Feb, 2026 30.58 Lacs

Delhi - Delhi

Tender For annual repair and maintenance of to various government buildings under jurisdiction of kkd court division (m-231) pwd delhi dg. 2025-26. (sh construction of smc panel tank including making steel base foundation and g.i. fittings and other miscellaneous works.

Central Government/Public Sector

CTN :43921179

02 Mar, 2026 2.75 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of puc civil allied works : : - earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m , as directed by engineer-in-charge. all kinds of soil , filling available excavated earth (excluding rock) in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m , complete as per directions of engineer-in-charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1-3-6 (1 cement - 3 coarse sand (zone-iii) -6 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement - all work up to plinth level 1-1.5-3 (1 cement - 1.5 coarse sand (zone-iii)- 3 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level and below plinth level.thermo-mechanically treated bars of grade fe-500d or 550d , complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and lifta) in foundations , footings , bases of columns , etc.complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and liftb) in superstructure columns , lintels , beams , plinth beams , roofs etc. , complete as per directions of engineer-in-charge. , dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete , complete as per directions of engineer-in-charge. , supplying and filling in plinth with sand under floors , including watering , ramming , consolidating and dressing complete , complete as per directions of engineer-in-charge. , demolishing r.c.c. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. , neat cement punning , providing and grouting of pockets with cementitious grout non shrink of approved make by suitable means free flowing pump curing etc complete as per directions of engineer in charge the payment shall be made on the basis of actual weight of approved grout used as per directions of engineer in charge , structural steel work riveted , bolted or welded in built up sections , and framed work like purlins , frames , trusses etc. including cutting , hoisting , fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer , complete as per directions of engineer-in-charge.. , providing , laying and jointing glazed stoneware pipes of 150mm dia pipe of class sp1with stiff mixture of cement mortar in the proportion of 1ratio1 1 cement 1 fine sand including testing of joints etc complete as per directions of engineer in charge , constructing masonry chamber 120x120x100 cm inside , in brick work in cement mortar 1-4 (1 cement - 4 coarse sand) for sluice valve , with c.i. surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and rcc top slab 1-2-4 mix (1 cement - 2 coarse sand - 4 graded stone aggregate 20 mm nominal size) , ic necessary excavation , foundation concrete 1-5-10 (1 cement -5 fine sand - 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1-3 (1

State Government

CTN :43835776

13 Feb, 2026 1.66 Lacs

Kangra - Himachal Pradesh

Tender For rrd of lwss kona saprul samba in tehsil palampur distt. kangra (hp) (sh:- demolition of old foundation and construction of new pump foundation for 50 hp centrifugal pump for set no. 1 and 2)

Central Government/Public Sector

CTN :43941034

24 Feb, 2026 NA

Duliajan - Assam

Tender For construction/repairing of approach road, repairing of plinth and construction of cc/ rcc foundation to suit dm-5 rig for cluster plinth of any location in tengakhat & chabua area or any area under central field-west in dibrugarh district, including supply of all materials except cement and bitumen drum sheets

Central Government/Public Sector

CTN :43941035

24 Feb, 2026 NA

Duliajan - Assam

Tender For construction/repairing of approach road of approx. 1.7 km, repairing and extension of hardstanding area of the plinth, dewatering, removal of mud of the effluent pit and construction of cc/ rcc foundation to suit dm-5 rig for cluster plinth of any location in tengakhat & chabua area or any area under central field- west in dibrugarh district, including supply of all materials except cement and bitumen drum sheets

CTN :43944451

18 Feb, 2026 27.00 Lacs

Jaipur - Rajasthan

Tender For repair of damaged transformer plateform, vcb foundation, leveling graveling of yard, construction of toe well, yard fencing and other repair of building at various under aen htm dd-i.

CTN :43926653

19 Feb, 2026 73.0 Thousand

Chennai - Tamil Nadu

Tender For supply of supplying the suguna 3 hp three phase mono block motor with water pressure pump, pressure 35 to 50 bar with 8 meter pressure hose pipe with gun , 3 hp 3 phase starter , ms angle base plate , 1 inch cpvc pipe 4 mtrs , 1 inch cpvc foot valve , labour charges for motor base plate foundation, motor fixing, electrical wiring with commissioning

CTN :43948243

20 Feb, 2026 NA

Panchkula - Haryana

Tender For supply of sit of centrifugal pumping set pump motor set 25hp , supply install testing of centrifugal pumping set pump motor set for 50hp , supply install testing of centrifugal pumping set pump motor set for 100hp , supply install testing of centrifugal pumping set pump motor set for 25hp , supply install testing of centrifugal pumping set pump motor set for 40hp , supply install testing of centrifugal pumping set pump motor set for 20hp , supply install testing of centrifugal pumping set pump motor set for 75hp , disconnecting electric connections, and removing unserviceable motor and pump , demolition of existing pcc foundation of motor and pump

CTN :43929939

20 Feb, 2026 2.05 Lacs

Bardhaman - West Bengal

Tender For repairing of lower platform, support bar, tie rod, diesel tank and hydraulic tank foundation of bg 825 motor grader sl. no. 25099.

CTN :43949283

20 Feb, 2026 2.30 Lacs

Ramgarh - Jharkhand

Tender For repairing of foundation of fuel tank, air cleaner housing and straightening and setting of 06 nos steel pipe on boom, stick and bucket cylinder, eye pin and love joy coupling and different cracked developed in turret, chassis structure of ck300d sl n

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector