Gland Don And Packings Tenders

Corporations And Associations And Others

CTN :41591919

24 Sep, 2025 NA

Babina - Uttar Pradesh

Tender For operation and maintenance of electro mechanical equipments of existing matatila intakewell 45 mld and 110 mld wtp at babina under augmentation and strengthening scheme distt jhansi - routine, periodically and breakdown maintinance of all equipments, associated accessories installed at various units at matatila head works including supply,opening and refixing, transportation , loading, unloading , t&p etc., matatila headworks, routine maintinance and servicing of 320 kva d g set including all necessary spares, oil, filters, diode and lubricant as per norms, repairing and overhauling of 650 lps discharge kirlosker make pumps with following works. model mf 40-45, dismantling, carting and re-installation of pump set including testing on load at site with all labour and t&p, supply and fixing of new ball bearing-6415 and oil seal., supply and fixing of new thrust bearing-51320m, fabrication, supply and fixing of fully balanced new pump shaft made of ss 410 as per sample., reconditioning of pump shaft with rematling, machining and balancing complete in all respect., reconditioning of pump impeller with rematling, machining and balancing complete in all respect., supply and fixing of new impeller for pump as per sample and zise, supply and fixing of new shaft sleeve, chuck nut made of ss 410 as per sample., supply and filling of lubricating oil in every 6 months, supply and fixing of new fastners, supply and filling of glande packing as per size and sample., supply and fixing of new glande plate with stud and nut., repairing & maintenance of kirloskar make induction motor with following works, dismantling, carting and re-installation of motor including testing on load at site with all labour and t&p, rewinding of 75 kw, 736 rpm, 3 phase induction motor with f-class insulated copper wire, nomax paper, sleeves, varnishing etc. complete with all material and t&p., rewinding of 55 kw, 736 rpm, 3 phase induction motor with f-class insulated copper wire, nomax paper, sleeves, varnishing etc. complete with all material and t&p., supply and fixing of new ball bearing-nu318c3, supply and fixing of new ball bearing-6318c3, fabrication, supply and fixing of new rotar shaft as per sample and material., reconditioning of rotar shaft with rematling, machining and balancing complete in all respect., reconditioning of bearing housing with rematling, machining and balancing complete in all respect., routine greasing of induction motor bearings with high temprature jelly grease in every 30 days intervals, supply and fixing of new fastners, supply and fitting of motor connection plate with suitable size of lugs as per sample etc. complete., repairing and maintenance of 600mm size sluice valve with following works, dismantling, carting and re-installation of sluice valve with all labour and t&p, supply and fixing of spendle for sluice valve made of ss 304 as per size and sample, supply and fixing of bush for sluice valve made of gun metal as per size and sample, supply and fixing of disc and body sheet for sluice valve made of gun metal complete with all maching and finishing, supply and fixing of glande plate with studs 600mm size sluice valve as per sample, supply and filling of glande packing as per size and sample, routine servicing of ht panel, 45 mld wtp, repairing and maintenance of 300mm dia size sluice valve at desluding with following works :-, repairing of desludging valve 300 mm dia spendle brass & gun metal, tefloan clf wheel, repairing and overhauling of sluice gate 500x500 mm size at backwash outlet with following works :-, dismentaling, carting, refitting and testing with all labour and t&p required at site, fabrication, supply and fixing of new threaded spindle shaft made of ss:316 as per size and sample, fabrication, supply and fixing of new bush made of gun metal and wage piece as per size and sample, fabrication, supply and fixing of new fix and moving sheet made of gun metal as per size and sample

Central Government/Public Sector

CTN :41669684

23 Sep, 2025 NA

Multi City - Multi State

Tender For annual repair and maintenance of 500 mm dia di pipeline from kharkai to turamdih : : - patrolling or inspection of di pipe line for checking leakage detecting from intake well cum pump house to turamdih area where pipe line exists with technical persons minimum one fitter with transport facility daily and including tightening of nuts and bolts where ever required for rectification of leakages observed during routine inspection. , attending as and when required major breakdown or rectifying leakage of di pipe line including fixing of necessary mechanical joint and all accessary within twelve hours information or notice for rectification till the resumption of the service including labour charges equipment tools and tackles but excluding cost of materials etc , overhauling charges of valves including change of gland packing if required with all labour charges for joints for following sizes of gate or sluice valve or butterfly valves for four hundred mm dia , overhauling charges of valves including change of gland packing if required with all labour charges for joints etc for following sizes of gate or sluice valve or butterfly valves for five hundred mm dia. , repairing of air valves including charges of float ball with all labour charges tools and tackles , earth work in excavation in trenches or drains including dressing saides and ramming of bottoms lift upto one point five metre including getting out the excavated soil and disposal of surplus excavated soil as directed all kinds of soil , return earth filling by available excavated earth excluding rock i trenches plinth sides of foundation etc in layers not exceeding twenty cm in depth consolidating each deposited layer by ramming allow for breading up lumes shrinkage etc watering lead upto fifty metre and lift upto one point five metre complete as directed by the eic. , clearing jungle including uprooting of rank vegetation grass bush wood trees and saplings of girth upto thirty cm measured height of one metre above ground level and removal of rubbishe upto a distance of fifty metre outside the periphery of the area cleared. , surface dressing of the ground including removing vegetation and in equalities not exceeding fifteen cm deep and disposal rubbish lead upto fifty metre and lift upto one point five metrea all kinds of soil. , supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete , providing and laying in position cement concrete of specifieda grade excluding the cost of centering and shuttering all work up to plinth level one cement isto three coarse sand six graded stone aggregate twenty mm nominal size. , rcc work below and above plinth level up to floor five level one cement isto one point five coarse sand isto three graded stone aggegate twenty mm nominal size is to be provided. , steel reinforcement for rcc work including straightening cutting bending placing in position and binding all complete. , centering and shuttering including strutting propping and removal of form for all heights. , 15mm thick cement plaster on rough side of single or half bricke wall of mix one cement isto six coarse sand to be provided. , neat cement punning , supply at site laying jointing including gasket nut bolts all complete miscellaneous di fittings like di bend mechanical joint tee gland packing all item as per is9523 for four hundred or five hundred mm dia di specials with spigot and flange combination like bend tee of class k12 suitable for push on jointing as per is9523 pipe all complete.

State Government

CTN :41441659

08 Sep, 2025 25.59 Lacs

Sarni - Madhya Pradesh

Tender For procurement of spares for sam turbo make charge pump model no. arn 100/400 installed in ash handling system of unit no. 10 and 11 of stps, sarni. - spares for sam turbo make charge pump model no. arn 100/400 installed in ash handling system of unit no. 10 & 11 of stps, sarni., bearing cover (outer) part no. 5, bearing cover (inner) part no.6, grease retainer part no.7, gland housing part no. 9, split gland part no. 10, shaft sleeve part no. 12, lantern ring part no. 13, thrower part no.14, outer casing (s. side & b. side) part no.15, casing cover plate with insert part no.16, shaft sleeve part no. 16i, inner casing part no. 17, impeller part no.18, wear plate (s. side) with insert part no.19, suction cover part no.21, grease nipple part no. 26, bearing housing part no. 3, key (sleeve) part no. 31, key (coupling) part no.32, dome nut set, stud (brg. housing adj) part no. 42, hexnut (bearing hsg adj) part no.43, washer (bearing hsg adj) part no.44, lock nut part no. 47, lock washer part no. 48, gland packing part no. 56, flange (suc. cover) part no.70, delivery adopter part no. 23

State Government

CTN :41108282

09 Sep, 2025 37.96 Lacs

Birsinghpur - Madhya Pradesh

Tender For corrigendum : biennial rate contract for online sealing of water, steam, fuel oil leakages in various valves, bonnets, glands and pipe flanges etc. for 4x210 mw and 1x500 mw units at sgtps, mppgcl, birsinghpur

Central Government/Public Sector

CTN :41686277

13 Sep, 2025 NA

Multi City - Multi State

Tender For supply of anti cockroach gel chalk , baygon spray , 9 volt battery , bucket plastic 15 ltrs capacity , araldite adhesive , bucket plastic 20 ltrs capacity , brush steel wire , brush scrubbing large hard brush , boric powder , bleaching powder stablised , jubilee clip 4 8 7 8 25 no each pack , clip jubilee 5 , clip jubilee 4 , clip jubilee 3 4 , clip jubilee 3.5 to 4 1 8 , clip jubilee 2 2.750 , clip jubilee 2 , clip jubilee 1 1 2 , clip jubilee 0 65 0 875 , clip jubilee 1 , dry chemical powder , detergent powder surf excel , cloth flanet 4 2 , cloth terry flax cotton 36 width , cloth hessain medium 102 cm wide rot proofed , cloth emery bs 871 61 grade 1 , cloth coated pvc , cloth calico grey 36 wide , cloth bunting red 57 width , cloth bunting green 57 width , dust pan , heat resistant gloves for galley , fluorescent tape for night marking of emergency wayslifebuoys , lint free cloth , linseed oil boiled , hacksaw blade 12 , grease lg 200 , gloves leather a , funnel 5 , emery cloth abrasive 11 9 is grit 36 279mm 227mm , lip seal for fire hydrant , paint roller refil 9 , paint roller refil 6 , paint brush 3 , paint brush 1 2 13 mm , paint brush 1 , petroleum jelly , oil grease remover , fevicol , stretch packing polythene sheet on handle core 50cm, width 20 mtrs roll , twine flax sewing fine , tape transparent 1 , soap hard yellow , turpentine oil , thinner , tape roll seal teflon thread of 12 mtr length 0.1 mm 1.25 cm , silicon cartridge water proof , sand paper isi mark , rubber gloves , face mask , fluorescent tape yellow 4 inch , wiper soft rubber , wind socks , safety googles , chain in silver for call boatswain , ear plug , white spirit , twine sewing medium flax , call boat swains , refill for automatic air freshener 250 ml , rat sticking gel , fiber dust brush , paint brush 4 , paint brush 2 , spray hand liquid insecticide , ncml solution- phosphoric acid qty for 06 month , ncml solution- teepol qty for 06 month , ncml solution- oxalic acid qty for 06 month , ncml solution- thiourea qty for 06 month //bid details 2 / 52

Central Government/Public Sector

CTN :41671268

13 Sep, 2025 NA

Multi City - Multi State

Tender For supply of jubilee clip 1 inch , clip jubilee 0 65 x 0 875 inch , cable tie 8 inch nylon , plastic bucket 20 ltrs , boric powder , clip jubile 1 1 2 inch , bleaching powder stablised , baygon spray or equivalent , araldite adhesive 180 gms , clip jubile 5 inch , clip jubile 3 4 inch , clip jubile 3 5 to 4 8 x 7 8 inch , clip jublee 3 5 to 4 1 8 inch , clip jublee 2 2 750 inch , clip jubilee 2 inch , cloth calico grey 36 inch wide , cloth bunting red 36 inch width 90 cm , clip jublee 4 inch , detergent solution , funnel 5 inch , dry chemical powder , cloth hassain medium 102 cm wide rot proffed , cloth emery b5 871 61 grade 1 , cloth coated pvc , fluorescent tape for night marking emergency ways lifebuoys , gloves leather a , cloth terry flex cotton 36 inch width , face mask , fluorescent tape yellow 4 inch , tape roll seal teflon thread of 12 mtr length 0 1mm x 1 25cm , ear seal for protector plug 3 m , silicon sealant compound 300ml tube , poly vinyl acetate dispersion based adhesive is 4835 , wire connection lugs , rj 45 connection , solder lead , stretch packing polythene sheet on handle core 50 cm with 20 mtrs rol , rubber latex long gloves , paint roller refil 4 inch , screw type bulb 24v 40w , screw type bulb 24v 60w

Central Government/Public Sector

CTN :41596971

16 Sep, 2025 42.58 Lacs

Visakhapatnam - Andhra Pradesh

Tender For provision of external electric supply for 661 sailors inliving accommodation at visakhapatnam - supply, installation, testing and commissioning of outdoor type step down transformer 1000 kva 11kv/433v dyn11 oil filled (onan) distribution transformer double copper wound with radiator wall with conservator tank & porcelain bushing for ht, lt with off circuit tap changer, marshalling box all as per is 1180 (part-1) : 2014, bee certified, energy efficiency level ii (as per latest ammendment no 4) complete as directed., a) off circuit tap changer (octc), tapping range +5% to -10% in a steps of 2.5% per step (7 positions)b) temp. rise shall be 40/45 deg. c for oil/winding resp. over an ambient of 50deg.c tempc) insulation class: ad) losses ( subject to is 1180 efficiency level 2/ star 2 as per latest amendment 4) max. total loss @ 50% loading: 2620 w and max. total loss at 100% loading: 7000 w.e) % impedance (%z) shall be 5.00% (subject to is tol.)f) rating & diagram (r&d) plate (fitted on transformer)g) oil temp. indicator (oti) with alarm and trip contacth) winding temp. indicator (wti) with alarm and trip contactj) rated temp class of transformer compartment k10 upto 1000kvak) lifting lugs/ hooks for transformer.l) oil filling inlet pipe with plug.m) air release valve and drain out pipe with plug.n) conservator tank with level guage.o) silica gel breatherp) first oil fill up to recommended level by manufacturer with new oil as per is 335.q) cable terminal boxes with bushes on both ht and lt sides.r) hv winding: delta & lv winding: star.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply and fixing main lt panel cpri approved made out of crca sheet 3.15 mm thick outdoor pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per al bus bar rated with insulators suitable for three phase and four wire lt ac, 50 hz 415 v 2000 a capacity complete with powder coating, necessary internal electric connection as required and provision of the following : (main lt panel)., incoming:air circuit breaker 1600 amps, 50 ka, mdo type, 4 pole, micro processor release, with adjustable type overload protection, short circuit protection, with necessary cts, meters and cable boxes. - 1 no.outgoing:a) mccb 250 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 07 no (bldg vtpn 02 nos, bldg panels 04 nos + spare)b) mccb 140 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (dg amf panel)c) mccb 160 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (ff panel)d) mccb 100 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (apfc panel)e) intelligent panel meter to measure voltage, current, frequency, power factor, kwh etc with all connected cts.f) led indicating lamps with colour red, yellow, blue of 03 sets.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply & fixing of perforated gi cable tray of size 150 mm width x 50mm depth x 1.6mm thickness with perforations not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with gi suspenders including bolts & nuts etc as req

Central Government/Public Sector

CTN :41676511

08 Sep, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of il valves spares for ntpc telangana - vlv comp assy,1.5inch,ilp,vsp(m), trim set,1.5inch,ca6nm+chrome,ilp,vsp(m), gasket,1.5inch,ilp,vsp(m), gland pkg,33,1.5inch,grafoil,ilp,vsp(m), vlv assy,ilp, trim set,3inch,ss316+st,ilp,vsn, gasket set,3inch,ilp,vsn, gland packing,3inch,grafoil,ilp,vsc, vlv assy,3inch,ilp,vsc, trim set,3inch,ilp,vsc, gasket,il,va2r,3in,cl300, glnd pckg set,il,va2r,3in,cl300, cntrl vlv assy,1in,il,va2r,cl600, trim set,il,vsl(cas),1in,cl600, gasket,il,vsl(cas),1in,cl600, glnd pckg set,il,vsl(cas),1in, vlv comp assy,4in,il,vsn,cl300, trim set,il,vsn,4in, gasket,il,vsn,4in,cl300, glnd pckg set,il,vsn,4in,cl300, valve comp assy,6in,il,vsp(m),cl900, trim set,il,vsp(m),6in,cl900, gasket,il,vsp(m),6in,cl900, glnd pckg,il,vsp(m),6in,cl900

Central Government/Public Sector

CTN :41637862

13 Sep, 2025 NA

Nagpur - Maharashtra

Tender For tender for supply of gland packings for ntpc mouda : : - as material description , as material description , as material description , as material description , as material description , as material description , as material description , as material description , as material description , as material description , as material description , as material description , as material description , as material description , as material description , as material description

Central Government/Public Sector

CTN :41657176

11 Sep, 2025 NA

Tiruvallur - Tamil Nadu

Tender For tender for supply of spares for waste recirculation pumps d d - cpp 1 100x80-315rl impeller , cpp 1 100x80-315rl shaft , cpp 1 100x80-315rl casing , cpp 1 100x80-315rl stuffing box , cpp 1 100x80-315rl adapter , cpp 1 100x80-315rl oil seal outboard , cpp 1 100x80-315rl oil seal inboard , cpp 1 100x80-315rl ring for impeller , cpp 1 100x80-315rl bolts for gland , cpp 1 100x80-315rl jackbolt for impeller , cpp 1 100x80-315rl locknut for jackbolt , cpp 1 100x80-315rl o-ring , cpp 1 100x80-315rl pin for shaft sleeve , cpp 1 100x80-315rl pump assembly , cpp1-100x80-400rl impeller , cpp1-100x80-400rl casing , cpp1-100x80-400rl stuffing box , cpp1-100x80-400rl gland plate , cpp1-100x80-400rl shaft , cpp1-100x80-400rl shaft sleeve , cpp1-100x80-400rl deflector , cpp1-100x80-400rl adapter , cpp1-100x80-400rl bearing bracket , cpp1-100x80-400rl bearing housing , cpp1-100x80-400rl bearing cover-nde , cpp1-100x80-400rl lock nut & washer , cpp1-100x80-400rl pedestal , cpp1-100x80-400rl driving key , cpp1-100x80-400rl bearing cover-de , cpp1-100x80-400rl pin for shaft sleeve , cpp1-100x80-400rl flushing tube , cpp1-100x80-400rl pump assembly

By Cities

By States

By Agencies

By Ownerships

By Sectors