Hydraulic System Tenders

Central Government/Public Sector

CTN :41453568

08 Sep, 2025 NA

Sonpur - Bihar

Tender For proposal for annual maintenance contract (amc) for engines/generators, abrasive rail cutter, rail cutting machine, rail drilling machine, hydraulic rail tensor, double action weld trimmer blower compressor grinder, etc. fittes as power pack on various small track machines.

Central Government/Public Sector

CTN :41672245

23 Sep, 2025 NA

Multi City - Multi State

Tender For tender for supply of sanitation and cleaning works at narwapahar township for 2025 to 2027 : : - deployment of 16 labour un skilled for cleaning of toilets two times at shopping complex community centre narwa club mtc estate office township electrical office old community centre cdc auditorium executive bunglow both schools including brooming of township road cleaning of drains removing spider nets from walls of the buildings collection of rubbishwaste from the buildings and dumping nearest dust bins washing of c type stairecase and mtc three room flats cleaning of floor collection of dustbins at c d mtc spl d type lifting drain cover and cleaning of chocked sewer line p trap cleaning of roofs chajjas spreading of bleaching powder carbolic acid spraying disposing of grass wood logs loose earth broken slabs and any other sanitary work related to this deployment of labour including lifting of dead body from gara nala river or on road side as rquired by local police lifting of dead catsdogs insect etc. and same will be prickle into the earth and as per direction of engineerincharge , deployment of 2 semiskilled manpower for supervision of the above job , cleaning of liquid mud loose soil including wild 1 mtr surrounding dust bin grass silt slush garbage etc from existing opencovered drains dustbin and other places including cost of tools tackles fuel lubricants complete including covering the tractortailor with good conditions plastictarpaulin as per instruction of engineerincharge including loading unloading and transporting of the same by mechanical transport by contractor and their own cost and as per dirction of engineerincharge payment of full loaded truck tractor trailer as per specification will be made after deduction of 8% volumetric measurement , phenoil , harpic , bleaching powder , floor washing powder , naphthalene ball , hard broom , soft broom , patson/sutli , carbolic acid (450 ml per bottle) , colin (450 ml per bottle) , water dozer , oxalic acid , toilet brush , broom sticks , rubber vaccum cleaner

corporations/Associations/Others

CTN :41509027

08 Sep, 2025 NA

Mettur - Tamil Nadu

Tender For procurement of radial piston pump for hydraulic loading cylinder operating power pack system 6 nos.

Central Government/Public Sector

CTN :41688259

15 Sep, 2025 NA

Thiruvananthapuram - Kerala

Tender For supply of hydraulic pallet truck -2 nos

State Government

CTN :41365007

08 Sep, 2025 NA

Phaltan - Maharashtra

Tender For supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can tester -can test

State Government

CTN :41672726

09 Sep, 2025 55.19 Lacs

Raichur - Karnataka

Tender For name of the work major overhauling of 02 nos kt1150 engines and 01 novt28 l engine cummin s make of san locomotives assisting for dismantling of kt1150 and vt28 l engines from the locomotives joint inspection of testing of overhauled engines shall be conducted between kpcl representative and firms representative joint inspection report of testing jirt after completion of re assembly shall be furnished to this office joint inspection of testing may be waived off at the discretion of the undersigned but the test report shall be furnished.removal and re installation of engine. this includes the complete procedure of safely removing the engine from the locomotive and, after completion of the necessary repair or overhaul work, re-mounting the engine back into the locomotive. all required tools, fixtures, lifting mechanisms, and safety measures shall be managed by the vendor.engine alignment process the alignment process involves precise positioning and securing of the engine to ensure correct interfacing with the locomotives drivetrain coupling systems, and support structures this includes, but is not limited to mounting of the engine onto the engine bed frame using proper alignment tools and calibrated instruments ensuring parallelism and angular alignment of the engine relative to the transmission or traction system verifying coupling concentricity and ensuring there is no misalignment that may lead to premature wear vibration or operational issues tightening of mounting bolts to specified torque values and rechecking alignment post tightening conducting necessary trial runs and adjustments if any to confirm proper functionality before final handover all the released items shall be returned in separate packing along with overhauled engines to kpcl

Central Government/Public Sector

CTN :41624667

19 Sep, 2025 1.59 Crore

Bangalore - Karnataka

Tender For tender for supply of schunk make tools : : - 201c652h0000207aa0201c652h2002211 out put gear tgb schunk no 1459338 and 1607213 and 1607215 hydraulic arbor 77.5 interm. sleeve 75 on arbor id1459338 for workpieces 201c636h0000556 201c652h0000207aa0201p652h2002211 runout 0.003 mm hardness 52-54 hrc backstop for workpiece 201c652h0000207aa0201p652h2002211 and 201c652h0000211 on arbor id 1459338 hardness 52-54 hrc axial runout 0.003 mm , 201c636h1150201aa0201c636h1103201 output shaft accy. drive schunk ref no1607494 hydraulic arbor 30 with intermediate sleeve technical specification clamping- for workpiece- 30 j6 via interm. sleeve intermediate sleeve needs to be loaded with the workpiece into the chuck active clamping length approx. 50 mm total length approx. 120 mm hardness of the tool 52-54 hrc t.i.r. 0.003 mm via sleeve 0.006 mm clamping actuation manual position of clamping actuation radial mounting cyl. mounting - similar to 1459338 operation gear shaping for workpiece 201c636h1150201aa0201p636h1103201 , 201c636h0000208aa2201c636h0000236 modified quill shaft schunk ref no1607492 hydr. chuck 29 technical specification clamping- for workpiece- 29 - workpiece tolerance needs to be decresed to it8 active clamping length approx. 50 mm total length approx. 120 mm hardness of the tool 52-54 hrc t.i.r. 0.003 mm clamping actuation manual position of clamping actuation radial mounting cyl. mounting - similar to 1459338 operation gear shaping for workpiece 201c636h0000208aa2201p636h0000236 , 205p 636h 0000 211e-cooler fan drive pinion specification 205p 636h 0000 211e schunk ref no1607496 hydraulic arbor 30 technical specification clamping- for workpiece- 30 +0.002 / +0.015 active clamping length approx. 20 mm total length approx. 120 mm hardness of the tool 52-54 hrc t.i.r. 0.003 mm clamping actuation manual position of clamping actuation radial mounting cyl. mounting - similar to 1459338 operation gear shaping for workpiece 205p 636h 0000 211 , 201c636h0000280 accessary drive gear schunk ref no 1408984 and 1607493 hydr. chuck 25.5 technical specification clamping- for workpiece- 25.5 g5 active clamping length approx. 15 mm total length approx. 150 mm hardness of the tool 52-54 hrc t.i.r. 0.003 mm via intermediate sleeve 0.006 mm clamping actuation manual position of clamping actuation radial mounting cyl. mounting - similar to 1459338 operation gear shaping for workpiece 201c 636h 0000 237 including intemediate sleeve including 3 x swivel fingers backstop 105 with axial fingers backstop for workpiece 201c636h0000280 fixation on arbor id 1408984 hardness 52-54 hrc axial runout 0.003 mm , 201c636h0000556 helical gear schunk ref no1459338 and 1607213 and 1607167 hydraulic arbor 77.5 interm. sleeve 75 on arbor id1459338 for workpieces 201c636h0000556 201c652h0000207aa0201p652h2002211 runout 0.003 mm hardness 52-54 hrc backstop for workpiece 201c636h0000556 on arbor id 1459338 hardness 52-54 hrc axial runout 0.003 mm , 201c636h0000237aa1201p636h1202205 lube pump drive gear schunk ref no1408984 hydr. chuck 25.5 technical specification g- for workpiece- 25.5 g5 active clamping length approx. 15 mm total length approx. 150 mm hardness of the tool 52-54 hrc t.i.r. 0.003 mm via intermediate sleeve 0.006 mm clamping actuation manual position of clamping actuation radial mounting cyl. mounting - similar to 1459338 operation gear shaping for workpiece 201c 636h 0000 237 including intemediate sleeve including 3 x swivel fingers , top palletspl mandrel - with run-out adjustment option - to suit to special mandrel and nsl3 turn-450-3-z - with centering ring and clamping pins , single acting mechanical vise with force amplifier ksg 160 jaw width - 125 mm jaw opening - 307 mm total height of vise including top jaws - 139 mm built-in clamping force adjustment using dail indicator 4 kn to 40 kn clamping is by tensile force - prevents base body from bending. fully encapsulated force transmission for optimal protection against coolant and chips. supplied wi

corporations/Associations/Others

CTN :41678658

17 Sep, 2025 NA

Chennai - Tamil Nadu

Tender For online tender for fixing rate contract for supply and installation of hydraulic hand pallet trolleys and semi electric battery operated stackers to various govt. institutions