Prime Mover Tenders

Corporations/Associations/Others

CTN :44974744

11 May, 2026 NA

Sinnar - Maharashtra

Tender For corrigendum : supplying excavator machinery (jcb /poclain etc.) for excavation in earth for sinnar municipal council, sinnar

CTN :44818484

08 May, 2026 NA

Sangrur - Punjab

Tender For corrigendum : providing e.c. bags, m.s. annealed wire, jumbo bags, nylon rope, dewatering etc. weaving of wire netting, hiring charges of jcb machine, poclain machines etc. which will be used during the flood season of 2026 for strengthening the embankments and p

CTN :44739264

21 May, 2026 NA

Lehra Mohabat - Punjab

Tender For corrigendum : annual maintenance contract for routine preventive and breakdown maintenance of heavy earth moving machinery that is loco shunters, bulldozer grabber loader machines poclain auger and coal compactor etc and rerailment of minor derailments of wagons and loco shunters in chp - routine, preventive and breakdown maintenance of heavy earth moving machinery, i.e. loco shunters, bulldozers, poclain, grabber loader machines, auger machine and coal compactor etc. and re-railment of minor derailments of wagons & loco shunters in chp of ghtp, lehra mohabat as per tender specifications.

CTN :45059236

11 May, 2026 25.00 Lacs

Ajmer - Rajasthan

Tender For annual rate contract of supply for jcb poclain machines spare parts

CTN :45060944

11 May, 2026 25.00 Lacs

Ajmer - Rajasthan

Tender For spare parts supply work for jcb and poclain machines

CTN :45042578

11 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of others - cond. different types of m&p items consisting of 1] sc. power pack, petrol driven engine [hrd], make- lukas, qty-1 no, 2] sc. control desk, make- lukas, qty-1 no, 3] sc. re railing bridge 1.1 mtr height 184 mm, make- lukas, qty-1 no, 4] sc. telescopic jack hp 65/t 400r, make- lukas, qty-4 nos, 5] sc. telescopic jack hp 25/t 450r, make- lukas, qty-4 nos, 6] sc. claw jack hp 50/p 850r, make- lukas, qty-3 nos, 7] sc. holding wire rope, make- na, qty-5 nos, 8] sc. inflatable tower light m/c 3.5 hp, make- aska, qty-2 nos, 9] sc. power pack 8.3 hp, diesel driven [hre], make- greaves ltd., qty-2 nos, 10] sc. portable generator set petrol/kerosene driven ,1.5 kva , make- greaves ltd., qty-6 nos, 11] sc. re-railing bridge 2.2 mtr, make- lukas, qty-1 no, 12] sc. re-railing ramp [ci] , make- na, qty-2 nos, 13] sc. pulling device,cap-220 kn, make- lukas, qty-1 no, 14] sc. jack 65/t small, make- lukas, qty-1 no, 15] sc. jack lukas 100 kn single act dia 60 mm, make- lukas, qty-1 no, 16] sc. jack 25/t 185 r [small], make- lukas, qty-2 nos, 17] sc. jack 65/t [big], make- lukas, qty-2 nos, 18] sc. rail grip for axle pusher, make- lukas, qty-1 no, 19] sc. hydraulic jack [manual] 10/t-2 nos & 30/t-1 no, make- na, qty-3 nos, 20] sc. hose pipe rubber, make- na, qty-11 pairs, 21] sc. cutter lukas [hrd], make- lukas, qty-1 no, 22] sc. spreader with spare nose, make- lukas, qty-1 no, 23] sc. combo cutter lukas, make- lukas, qty-1 no, 24] sc. base of jack 25/t , make- lukas, qty-1 no, 25] sc. base of claw jack, make- lukas, qty-2 nos, 26] sc. line closure for pulling device , make- lukas, qty-2 nos, 27] sc. axle pusher head , make- lukas, qty-4 nos, 28] sc. claw jack head , make- lukas, qty-4 nos, 29] sc. height piece for [radious plate] telescopic jack [ai] , make- lukas, qty-2 set, 30] sc. claw jack rope head , make- lukas, qty-4 nos, 31] sc. bridge stopper[triangular shape] , make- lukas, qty-3 nos, 32] sc. roller carriage , make- lukas, qty-3 nos, 33] sc. roller carriage top plate , make- lukas, qty-2 nos and 34] sc. portable diesel generator set , make- greaves ltd., qty-1 no. condition- 1. lot will be delivered as per qty mentioned in description column, 2. materials like nearby other machine and ferrous , nonferrous , ss items etc near/surrounding the offered items is not allowed for lifting or taking delivery and the same is required to be handed over to the custodian if so found, 2. picking and choosing of materials near the offered items is not allowed.3. purchaser has to make his own arrangement for lifting and taking delivery of the lot.4. custodian may allow purchaser to bring crane if it is required and justified.5. the lot will be sold on "as is where is basis", 5. cutting/dismantling of sold lot is allowed.

CTN :45044160

06 May, 2026 39.41 Lacs

Modinagar - Uttar Pradesh

Tender For palika seemantargat varsha ritu se purva 03 maha tak nalo ki safai ka karya karaye jane hetu nala safai me daksh evam anubhavi 50 karmik va 20 dino ke liye poclain machine ki apoorti ka karya

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

State Government

CTN :44919726

04 May, 2026 20.73 Lacs

Raichur - Karnataka

Tender For procurement of lab glasswares and lab apparatus to rtps - combined glass electrode, ph meter, conductivity cell (0.1), conductivity meter, turbididy meter, spectrophotometer cuvettes, orsat apparatus (vensil make), thermometer wet & dry bulb, self anemo syringe (flue gas), combination ph electrode, desiccator - 250 mm, heating mantle, hot plate, corrosion coupon (cu-ni), corrosion coupon (ss), corrosion coupon (ms), gas bladder, brush for conical flask, screw clips or pinch cocks, burette clamp & holder, filter paper, filter paper -no.41, filter paper -whatman no.42, tissue paper rolls, spatula 9 inch, separating funnel stand, ph indicator paper range 1-14, wash bottle-500 ml, beaker-50ml, beaker - graduated-25ml, beaker borosil graduated 100ml, borosilicate glas beaker 250ml, beaker-500ml, beaker(p)1000ml, beaker-1000ml, beaker-(p)-5 ltr, beaker plastic jug 2.5l, beaker(p)-100ml, beaker (p)-250ml, beaker-(p)-500ml, beaker-(p)-2000ml, beaker-(p)-10 ltr, bod bottle-300 ml, reagent bottle-250 ml, reagent bottle-500 ml, reagent bottles - 2000 ml, bottle reagent 1000 ml, glass rod flat end, bottle reagent ambcolour 500ml, bottle reagent ambcolor 1000ml, bottles-sampling wide-500 ml, bottles-sampling-1 ltr, indicator bottles with dropper, indicator bottle with droppers, bottle-weighing-25 ml, burette stand, burette-5ml, burette-10ml, burette /ptfe screw 25ml, burette-auto-50 ml, measuring cylinder-10 ml, cylinders-50 ml, cylinders-250 ml, cylinders-500 ml, cylinders-1000 ml, dishes-(c)-150 x 75 mm, volumetric flask -100 ml, deposit monitor, portable air quality monitor with data logger, flask-conical -100 ml, flask-conical -250 ml, flask-with stopper-250 ml, std volumetric flasks-25 ml, flask-volumetric-50 ml, flask-volumetric-250 ml, flask-volumetric- 500 ml, flask-volumetric- 1000 ml, funnel -50 mm, funnel -100 mm, separating funnel, pipettes-1 ml, pipette-s- 5 ml, pipette-s- 10 ml, pipette-s- 25 ml, rubber bellow for auto burette, cylinder-with stopper-250 ml, reagent bottle/plastic 1000ml, hydro meter sp.gr. 1 - 2.0, rubber blader for pipettes, round bottom flasks -250ml, round bottom flasks-500ml, reflux condensors-400mm, pipettes / bulb type - 50ml, corrosion coupon rack, bactaslides(yeast&fungi), bactaslides(pseudomonas), bactaslides(srb), bactaslides(e-coli), bio-foluling monitor, combined glass electrode, ph meter, conductivity cell (0.1), conductivity meter, turbididy meter, spectrophotometer cuvettes, orsat apparatus (vensil make), thermometer wet & dry bulb, self anemo syringe (flue gas), combination ph electrode, desiccator - 250 mm, heating mantle, hot plate, corrosion coupon (cu-ni), corrosion coupon (ss), corrosion coupon (ms), gas bladder, brush for conical flask, screw clips or pinch cocks, burette clamp & holder, filter paper, filter paper -no.41, filter paper -whatman no.42, tissue paper rolls, spatula 9 inch, separating funnel stand, ph indicator paper range 1-14, wash bottle-500 ml, beaker-50ml, beaker - graduated-25ml, beaker borosil graduated 100ml, borosilicate glas beaker 250ml, beaker-500ml, beaker(p)1000ml, beaker-1000ml, beaker-(p)-5 ltr, beaker plastic jug 2.5l, beaker(p)-100ml, beaker (p)-250ml, beaker-(p)-500ml, beaker-(p)-2000ml, beaker-(p)-10 ltr, bod bottle-300 ml, reagent bottle-250 ml, reagent bottle-500 ml, reagent bottles - 2000 ml, bottle reagent 1000 ml, glass rod flat end, bottle reagent ambcolour 500ml, bottle reagent ambcolor 1000ml, bottles-sampling wide-500 ml, bottles-sampling-1 ltr, indicator bottles with dropper, indicator bottle with droppers, bottle-weighing-25 ml, burette stand, burette-5ml, burette-10ml, burette /ptfe screw 25ml, burette-auto-50 ml, measuring cylinder-10 ml, cylinders-50 ml, cylinders-250 ml, cylinders-500 ml, cylinders-1000 ml, dishes-(c)-150 x 75 mm, volumetric flask -100 ml, deposit monitor, portable air quality monitor with data logger, flask-conical -100 ml, flask-conical -250 ml, flask-with stopper-250 ml, std volumetric flasks-25 ml, fl

CTN :45036605

15 May, 2026 5.00 Lacs

Balaghat - Madhya Pradesh

Tender For for the excavation work of dhobi ghat pond balaghat, poclain machine including diesel should be made available at the rate of per hour.

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

corporations/Associations/Others

State Government