Prime Mover Tenders

State Government

CTN :41333620

29 Aug, 2025 41.38 Lacs

Bikaner - Rajasthan

Tender For corrigendum : purchase of various testing general apparatus (lab equipment) in quality control labs for all zone - flash and fire point apparatus: supply , installation & commissioning of pensky-martens closed & open tester electric operated apparatus for determination of flash & fire point of tar & bituminous material as per is:1209-2021 using method a,b & c . the complete apparatus and its accessories shall be supplied, which shall confirm as per is:1448 (part-21) -2012 /iso 2719-2002 & is: 1448 (part-66)-1969 (reaffirmed 2003) and the complete item shall be supplied as per direction of engineer in charge . the appartaus shall include :-brass or copper test cup capacity 50 ml. with tight fitting lid. stirring mechanism (motorized), flame application device with shutter , electrically heated base with adjustable heating rate (1 - 6 c per minute) , standard thermometer (0 to 370 c) , heavy duty stand with insulated housing with 3.0 metre power cord & power plug etc complete. rates are inlusive of all taxes ., vibrating machine with 7.06 cmx7.06 cm x7.06 cm cube moulds :-supplying , fixing and commissioning electric operated vibrating machine with mould confirming to is: 10080-1985 (reaffirmed 2004) which shall be capable for compaction of cement mortar cube required as per is:4031. the complete frame assembly shall consist of device to hold a 7.06 cm mould to feed the sample in a mould. vibrator shall be mounted over coiled spring to carry the cube mould and vibrations are developed by mean of a revolving eccentric shaft. instrument shall be fitted with belt guard. electric motor of any reputed company is driven by an endless belt running on a crowned pully on the vibrating machine. digital time shall be also be fitted with digital timer and switch for ease of operation.main key features & technical specification of machine & accessories shall be as under :-- frequency of vibration :- 12000 + 400 rpm- power supply :- 230 v , 50 hz , ac supply single phase- motor capacity :- min. 3/4 hp , 2800 rpm- cube mould for cement (6 nos with base plates ) :- as per is:10080, size 7.06 cm x 7.06 cm , weight of mould shall be 2.8 + 0.2 kg of msinstrument supply shall include standard sand gr.-i, ii & iii , cube mould , poking rod , mortar mixing plate , suitable power cord min. 3.0 mtr long with power plug etc. the complete item shall be supplied as per direction of engineer in charge . rates are inlusive of all taxes ., vicat needle apparatus :-supply of vicat apparatus complete set confirming to is:5513-1996 suitable for determining the consistency, setting time , soundness of cement & standard consistency as per is 4031. the apparatus shall consist of a metallic frame with movable rod carrying interchangeable attatchments , consistency plunger (polished brass having dia 10 + 0.05 mm, length 50 + 1 mm with lower edge flat) initial setting needle (dia 1.13 + 0.05 mm ) final setting needle (with annular collar ) and a conical mould (top diameter 70 0.5 mm, bottom diameter 80 0.5 mm, height 40 0.5 mm.) . the plunger assembly shall allow free vertical movement and include a graduated scale for measuring penetration depth . the apparatus shall be supplied with a glass base plate.apparatus shall include , gauging trowel, stopwatch, all accessories shall be supplied in a protective box and as per direction of engineer in charge .rates are inlusive of all taxes ., gi sieve set 45 cm.dia with lid & pan (complete set) :-supply of is sieve set for coarse aggregate having dia of 45cm made of gi sheet with seamless welding. each sieve should having rounded edges at top for safe operation. each sieve must be of tight fitting to each other. sieves set finishing & sizes shall comply is 460-2020 and as per direction of engineer in charge.rates are inlusive of all taxes . each set consists followings :-125mm, 100mm, 90mm, 80mm, 75mm, 63mm, 53mm, 50mm, 45mm, 40mm, 37.5mm, 31.5mm, 26.50mm, 25mm, 22.40mm, 2

State Government

CTN :41333626

29 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen

Corporations And Associations And Others

CTN :41390891

14 Aug, 2025 NA

Delhi - Delhi

Tender For engaging of tipper truck with auto lifting facility and cwaler mounted type hydraulic excavator (pocklain machine) for ward no. 184 (jaitpur) central zone.

CTN :40967878

21 Aug, 2025 NA

Gandhinagar - Gujarat

Tender For corrigendum : tenderforsupply, testing, commissioning, delivery &comprehensive operation and maintenance contract for 5 (five) years of hopper tipper dumper (with min. 2.8 cum tipper load body) - 12 nos. as per gmc tender specifications, scope of work & terms - conditions

CTN :41388980

23 Aug, 2025 NA

Parganas - West Bengal

Tender For supply of permanent magnetic lifter (q3)

CTN :41357020

11 Aug, 2025 3.20 Lacs

Kota - Rajasthan

Tender For work of vibration monitoring and analysis of rotating equipments of kstps, kota.

CTN :41370921

21 Aug, 2025 4.62 Lacs

Rewa - Madhya Pradesh

Tender For hiring of pocklain 220 machine as per requirement, on rental basis including driver and diesel for municipal corporation rewa.

Central Government/Public Sector

CTN :39986779

11 Aug, 2025 NA

Nashik - Maharashtra

Tender For bid to ras corrigendum : supply of universal tripod jack set , axle jack 50 t for aircraft application , tow bar (universal towbar for arrow body aircraft)

CTN :41288345

14 Aug, 2025 NA

Nasirabad - Rajasthan

Tender For supply of 133a032 , t connector with box, 343b701 , uhm pad for introduction , hex connector for filling gun, , l bend for filling gun, 359b537 , back mounting for cylinders , brass block,230b938 kosncris , 230b956 yoke plate c plates for gd pt , ms block,230b955 , 230b896, centering base plate , 231b648, centering clamping plates , centering arm roller, 215b931 , manchete, 110651 , slide for cylinders, , clamping arm, , m10 stud rod , toggle joint , vibration damper, 153210 , complete centering assembly gd pt , mark iv cuc card 134362 , communication cable with lan end , cuc card cable for mk 4 , loadcell cable for double static checkscale , display, kosan mark iv cuc , key pad for cuc , load cell cable mark 4 , magnetic sensor,161a182,turck , clamp for magnetic sensor , inductive sensor , sensor cable 3 mtr , sensor cable 5 mtrs , sick optic sensor , sick reflective sensor , sick diffusive sensor , optical cable , lens for fiberoptic 2017400 , lot adopter , bearing skf 6024 2z , bearing skf 6016 2z , bearing skf 6304 2z , bearing skf 6305 2z , anchor bolt 10 mm , anchor bolt 12mm , anchor bolt 16 mm , ms nut and bolt m8 2.5inch , ms nut and bolt m10 1.5inch , ms nut and bolt m12 3.5 inch , ms nut and bolt m16 4 inch , allenkey bolt 4mm head , allenkey bolt 3mm head , screw for cuc card kosan , flat head allen key bolt 4mm head , glass section for pipeline 2 inch , gskt,sht,asbestos,4mm , gasket,sponge rubber , conveyor chain, riveted , pneumatic push button , pneumatic cylinder with teflon pad , pnuematic gun for service air , metal gasket for pipeline 0.5 inch , metal gasket for pipeline 1 inch , metal gasket for pipeline 2 inch , metal gasket for pipeline 3 inch , metal gasket for pipeline 4 inch , metal gasket for pipeline 6 inch , metal gasket for pipeline 8 inch , metal gasket for pipeline 10 inch , cir receiver mounted,110671 carousel , 48 head gun , cuc card display , g.d. cup lower bell , sealing machine cup , manual sealing machine cup , 131507 pd 948 pressure transmitter , pam 5kg gun set , toggle joint g.d. and p.t , boom dry chain , filling vot gun , filling lot gun , cylinder c96kdb40 300c smc , front plate keyboard cuc mkiv , guide road set , 48h module , 48h clutch , lifiting pad with bearing and bolt , gd_ pt clamping arms with rollers , lifter bearing skf 6301 2rs1 , bush bolt gd_pt , stopper roller double wheel , gas stop valve seal kit 48 head , makeen cuc load cell module mkiv 1 load cell ad box

CTN :41074407

22 Aug, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of wdm based onboard fiber optic interrogator as per enclosed spec table 1 note if 16 channel wdm interrogator is not available 2 nos of 8 channel wdm interrogators need to be supplied , ofdr based onboard fiber optic interrogator as per enclosed spec table 2 with qualification requirements mention in sec 3 , fiber optic strain sensors for wdm based interrogator as per spec table 3 , fiber optic temperature sensors for wdm based interrogator as per spec table 3 , fiber optic vibration sensors for wdm based interrogator as per spec table 3 , fiber optic pressure sensors for wdm based interrogator as per spec table 3 , fbg codded fiber for interrogator 300 meters for wdm 2 sets 1 plus 1 spare and ofdr 1 set , broadband reflex boxes for interrogator 4 sets for wdm plus 2 sets for ofdr , optical splicer with fusion splicer and fiber cleaver wdm 1set and ofdr 1 set , connectors sets or interrogator , fiber tool case with cleaning and installing equipment wdm 1 set and ofdr 1set , fiber scope for wdm based interrogator , patch cords with double ended fc or apc connectors per interrogator for wdm 50 and ofdr 20 , splice protectors wdm 1set and ofdr 1 set , documentation and manuals hard and soft copy

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Corporations And Associations And Others

Central Government/Public Sector