Structure Materials Tenders

Central Government/Public Sector

CTN :41624803

10 Sep, 2025 NA

Kannur - Kerala

Tender For tice for supply & installation of printing materials converge id card-student-950 , converge id card-teacher-100 , converge id card-staff-200 , converge id card volunteers-200 nos service providers-175 , handbands-student , handbands teachers , handbands-staff , handbands volunteers-250 nos , placard-cultural walk , placard-transport committee , placard-any other requirement? , food coupons-student-5 times (950) , food coupons-teachers 5. times (38 for 18 centres + 62 nift kannur faculty and staff) , food coupons staff-5 times (38 for 19 centres 162 for kannur staff) , food coupons volunteers-250 nos-5 times (nift kannur students) , physical invitation card with cover , rulebook , 10 nos with silver embossing for cover page only and 10 nos with normal printing as per specifcations , event schedule/brochure-teachers , velcome note teachers , 17. university ground-student entrance - extreme end gate-direction, with gi frame and with fabric material with installation and the material should be taken back by the supplier , 18. university ground-big converge branding with gl frame and with fabric material with installation and the material should be aken back by the supplier , 19. university main stage sunshade covering with fabric material , 20. university main stage - background fabric material with gi frame and with fabric material with installation and the material should be taken back by the supplier , 21. university main stage - hand railing cover centre skirting with foam board with instilation and the material should be taken back by the supplier , 22. university main stage - hand ralling cover side skirting with instilation and the material should be taken back by the supplier , 23. university main stage-adjacent bleachers-wall foam boards with instilation and the material should be taken back by the supplier , 4. university main ground - green grill mesh barricades-skirting with branding with installation and the material should be taken back by the supplier , 5. university main ground - selfie point - indivisual/small group. fabric material with gl frame with installation and the material should be taken back by the supplier , 26. university main ground-backdrop wall photobooth-big groups , abric material with gl frame with installation and the material should be taken back by the supplier , 27. unniversity main stage-stage panels , fabric material with gi frame with installation and the material should be taken back by the supplier , standees to be placed in various points in and around campus. fabric material with gl frame with installation and the material should be taken back by the supplier , foam board display , fabric material display along with gl frame with installation and the material should be taken back by the supplier , auditorium backdrop with fabric material along with installation , cuboid totem structures alongwith gi fabrication , 2 foam boards of 2x2 ft sizes , foram boards of 4x2 ft sizes , the same should be inserted in the structures , nift campus-selfie point - individual/small group , fabric material along with gl frame and with fabric material with mstallation and the material should be taken back by the supplier , nift campus-backdrop wall photobooth - big groups , fabric material along with gi frame and with fabric material with stallation and the material should be taken back by the supplier , 10. nift campus map print-vinyl print , along with installation , flags-tall pole- , 20 nos at kannur university ground on rental basis , flags , nift campus-20 nos , handheld flags-20 nos , kannur university-20 nos , vertical hanging banner-foyer structure top edge- , horizontal banner above the auditorium gate with converge branding print , fabric material with installation , wayfinders installations-foamboards along with installation

Central Government/Public Sector

CTN :41688128

19 Sep, 2025 NA

Karaikal - Pondicherry

Tender For purchase of crucible furnace , moulding sand 40 kg per bag , moulding box cope and drag (wooden) 250*250*75,250*250*50 (in mm) , flange patten (aluminium) , gear wheel (aluminium) , hand wheel (aluminium) , vent wire (galvanized iron) height 250 and 2.5 mm diameter , trowel , runner pin 200 mm height , raiser pin 150 mm height , strike-off bar 300*50*20* (l*w*t) in mm , draw spike , shovel (hand) , riddle , mallet (wooden) 60 diameter *140 length , lifter (galvanized iron) 1 feet height , slick , swab , gate cutter , bellow - medium , core box (wooden) 25 mm diameter *300 mm length , spirit level 1 feet , flat tongs 18 inch , round tongs 18 inch , square tongs 18 inch , inside caliper 6 inch , outside caliper 6 inch , been rammer (small) , sprinkler , bellow air motor hp , crucible , fire cock 40 kg per bag , furnace air pipe 50 mm diameter and length 2 feet , furnace round type fire bar 12 mm or above diameter * 200 mm or above length , mild steel rod 6 mm diameter *250 mm length , slag remover spoon small size , square tray mild steel plate ( 1 1 feet) , centrifugal air blower 3 hp or above, 3 phase , aluminium material 5 kg , transportation and packaging cost , goods and services tax on s. no. 01+02+03 .+40 @ _______________________% , grand total of the product (s. no. 01+02+03 .+40)

State Government

CTN :41627073

30 Sep, 2025 38.11 Crore

Bagalkot - Karnataka

Tender For construction of additional pump house with intake structure at anadinni along with laying of ms pipe line from proposed additional pump house to already laid raising main of wtp for water supply scheme to navanagar bagalkot on turnkey basis

State Government

CTN :41610928

11 Sep, 2025 84.87 Lacs

Unakoti - Tripura

Tender For 1.renovation of water supply pipeline 2.const of 1 semipermanent structure size 10mx10m septic labour room at 1st floor 3.const of burnunit at hospital 4.mtcof unakoti dist hospital kls tripura sh provide and fix of floor n wall tiles during yr 24 25

corporations/Associations/Others

CTN :41537183

08 Sep, 2025 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle cad dismantling, fabrication and erection of worn out platform with structure in above the cooling water channel i for storm water discharge pipe line, walkway platform and motor bed assembly in storm water pump house ii

State Government

CTN :41365007

08 Sep, 2025 NA

Phaltan - Maharashtra

Tender For supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can tester -can test

State Government

CTN :41650631

06 Sep, 2025 NA

Kolkata - West Bengal

Tender For installation of acp and glass fixed partition with aluminium structure in resource room lobby of aps kolkata primary wing

State Government

CTN :41704626

22 Sep, 2025 16.26 Lacs

Ahmedabad - Gujarat

Tender For gaboin structure 1to3,pipe culvert-1,farm outlet-1

State Government

CTN :41596786

08 Sep, 2025 NA

Sahibabad - Uttar Pradesh

Tender For construction of foundation for 1010 kva diesel generator set and exhaust pipe tower structure in cel

Central Government/Public Sector

CTN :41613141

18 Sep, 2025 42.00 Lacs

Ranchi - Jharkhand

Tender For provn of addl defi furniture for ocs at ota gaya - schedule "a" part-i (wooden furniture), table writingfd-275, chair easyfd-229, table dressing gentsfd/e6/map/16, hat stand with mirrorfd-233, schedule "a" part-ii (steel furniture), almirah large steel fd/e6/map/18, bed hard fd/e6/map/08(r), fmn set u typefd-221(m), chair writingfd/e6/map/12, s&f steel work in tubular trusses including special shaped washer etc complete using erw or induction butt welded tubes confirming to i.s. 1161-1998

By Cities

By States

By Agencies

By Ownerships

By Sectors