Structure Materials Tenders

corporations/Associations/Others

CTN :43951832

03 Mar, 2026 32.70 Lacs

Palanpur - Gujarat

Tender For work of erection of 11kv outdoor support structure with providing and fixing of outdoor 11kv bus material for various sub-stations under tharad division of palanpur circle.

Central Government/Public Sector

CTN :43921179

02 Mar, 2026 2.75 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of puc civil allied works : : - earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m , as directed by engineer-in-charge. all kinds of soil , filling available excavated earth (excluding rock) in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m , complete as per directions of engineer-in-charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1-3-6 (1 cement - 3 coarse sand (zone-iii) -6 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement - all work up to plinth level 1-1.5-3 (1 cement - 1.5 coarse sand (zone-iii)- 3 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level and below plinth level.thermo-mechanically treated bars of grade fe-500d or 550d , complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and lifta) in foundations , footings , bases of columns , etc.complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and liftb) in superstructure columns , lintels , beams , plinth beams , roofs etc. , complete as per directions of engineer-in-charge. , dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete , complete as per directions of engineer-in-charge. , supplying and filling in plinth with sand under floors , including watering , ramming , consolidating and dressing complete , complete as per directions of engineer-in-charge. , demolishing r.c.c. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. , neat cement punning , providing and grouting of pockets with cementitious grout non shrink of approved make by suitable means free flowing pump curing etc complete as per directions of engineer in charge the payment shall be made on the basis of actual weight of approved grout used as per directions of engineer in charge , structural steel work riveted , bolted or welded in built up sections , and framed work like purlins , frames , trusses etc. including cutting , hoisting , fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer , complete as per directions of engineer-in-charge.. , providing , laying and jointing glazed stoneware pipes of 150mm dia pipe of class sp1with stiff mixture of cement mortar in the proportion of 1ratio1 1 cement 1 fine sand including testing of joints etc complete as per directions of engineer in charge , constructing masonry chamber 120x120x100 cm inside , in brick work in cement mortar 1-4 (1 cement - 4 coarse sand) for sluice valve , with c.i. surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and rcc top slab 1-2-4 mix (1 cement - 2 coarse sand - 4 graded stone aggregate 20 mm nominal size) , ic necessary excavation , foundation concrete 1-5-10 (1 cement -5 fine sand - 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1-3 (1

corporations/Associations/Others

CTN :43944218

24 Feb, 2026 5.40 Lacs

Vellore - Tamil Nadu

Tender For supply of double pole structure material complete set

corporations/Associations/Others

CTN :43938131

24 Feb, 2026 NA

Jaipur - Rajasthan

Tender For auction sale of iron (metal) sheet made structure of water vending machines

Central Government / Public Sector

CTN :43947492

18 Feb, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12231ams26k,98050175, quantity- 68.775 mts. scrap condemned unserviceable ms-gi-ci rusted,corroded,dusted mixed scrap of c and w,loco,p. way,signal interlocking material consisting of all type of sheets,boxes,ms high gauge,pipes,footsteps,rings,strips,filters,trusses,patch cut parts,gutters,drum clocks,distribution boards,u rack,boring rod,ms panel body,ms battery charger covers,hand cuffs,driver seat,hand cart,push trolley,packing strips,ms body of block instrument,ms boiler coil cut pieces,42 u rack ms body,ms collapsible gate,ms termination box,ms bathroom ventilator,ms body of data logger,ms heater coil,screen guard,nuts,bolts,lavatory doors,ms carriage doors,pins,rivets,links,rods,angle cut pieces,structural frames,brackets,drums,cocks,basins,wire meshes,wire ropes,water tank cut up parts,casings,corrugated sheets,filter top and bottom caps,clamps,washer plates,stands,frames,sheet cuts,plate cuts,joists,channels,bases,plates,flats cut pieces,vestibule frames,window,door,shutters,head stocks cut up parts,broken t and p items,racks,compensating rings,bindings,washers,dust bins,chains,berth strips,gate frames,iron furniture,motor bodies,screw rods,levers,flats,rod cut pieces,trolley wheels,gi ducts,glow sign boards,ms electrical scrap,building rods,packing strips,ms body of rru,air cooler empty bodies,cbf filter,corrugated sheets,drums,blower motor frames,ucb packing frames,under frame cut up parts,berth frames,supports,cylinder blower covers,valves,end shield covers,traction motor yokes,shafts,piston rings,gears,brake shoe heads,brake gear items,straps,cotters,springs,equalizing stays,fan hub,end shield,pinions,ms covers,signal arms,lc gate pipes,ladders,angles,signal booms,rounds,signal buckets,pulleys,fabricated posts,signal lamp structures,liners,screws,spikes,air brake cylinders,brake hangers,bss hangers,battery boxes,battery containers,junction and location boxes,sleepers cut pieces,axle counter empty box,dc-dp ips empty rack ,sge block instrument empty box ,reset counter box,gps clock ,42 v rack,transformer bay,ms chain pulley blocks,beam scale parts,idly cooker with steam generator body,wheel barrow,fry pan single burner,ms floor stand,ms sliders,ms body wet grinder,fry pan,jara,ms ips rack rifle safety chain,ms air pump,foot spray,antenna,spiral binding machine,ms man drill,trbc covers,hand cart push trolley,expresser fan guard,ms first aid box,hacksaw frame,tool box,tie bars,ci brake blocks,composite brake blocks,ci pulleys,buckets,ms gear wheels,gym equipment,roti maker,bicycle parts,axle box,bfr cut up parts,grills,mesh,gate wheels,girders cut pieces,collars,trolleys,foot plates,signal point rods and any other ms-gi-ci material present in the lot with or without attachments of nf,ss,rubber,nylon and plastic. ms pan mortars,wire claws,wire baskets,crow bars,jim crow,dip lorry,weld filling body,sleeper hooks,rail dollies,rail cutting frames,augers,pick axe,tongue for rails,spades,beaters,ballast rake,powrahs,rail cum road mono trolley,case tin,h.s.lamps,rail dolly clips,shovels,trolley wheels and similar gang man items of sorts and sizes,with or without attachments.fiber,glass,windows,frp glass windows,window frames of sorts and sizes,broken or unbroken,with or without attachments of nf window shutters. [aluminium - 2 percent] note- 1. nf material,axles,wheel discs,and rails or material not mentioned in the description,if found during the delivery are to be returned to railways. 2. track and track fittings running through this area are excluded. 3. nf and stainless-steel attachments are approximately 0.1 percent of the lot quantity. 4. gas cutting permitted to facilitate loading. location- bin no- 231a, right side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.

Central Government / Public Sector

CTN :43947504

18 Feb, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12160ms26k, 98050011, quantity- 62.280 mts. scrap condemned unserviceable ms-ci signal interlocking materials consisting of levers, rods, ms campus rollers of molb, molb weights, molb booms, signal tubular post, roller trestle, stop boards, 33 mm rods, signal arms, gi and ms wires, lc gate pipes, gate structures, ladders, angles, channels, joists, roller stands, electric poles, cable termination box, direct type lever frame, sa 1914 type trays, sm slides, ssi termination rack, control panels, signal booms, boom locks, cable termination rack, adjustable crank, e type lock, cable marker, ground connection rods, fuse unit, power racks, cam path, gear box, signal reverser, ground lever frame, molb, eolb pedestal, telecom charger body, wire adjustment screws, molb compass roller, gate weights, cls tubular post, surface base, nuts, bolts, rounds, turnout wheels, eye joints, point machine covers, clamps, signal buckets, pulleys, d.w.diversion wheel, gate control panel, calling on unit, gear box assembly with clutch, winch, offset brackets, h.p lock, chequered plates, ptb, location boxes, rkt, axle counter coil fixing plate, shunt signals, route arm, route [1 way, 2 way, 3 way and 4 way], ib hut cut parts, ms electrical point detector, junction type route indicator, route indicators, structures, casing structures, ci bases, gear wheels, flats, cable termination base, u- brackets, ci weights of booms, fabricated posts, cls 2, 3 and 4 aspect units, trestle, sge block instrument, y-crank, stands for wheel tension measuring devices of d.w clutch, lock bar clips, drum clock, ec boxes, relay racks, tlj boxes, foundation shoe, ekt, pd clamps, galaxy stand, meeting posts, signal lamp structures, point rods and other similar signal and interlocking scrap material of sorts and sizes, with or without attachments including negligible nf attachments. note: private crane permitted for loading. note- nf attachments are approximately 2 percent of lot quantity. location- bin no- 160, left side of road no- 1. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per mv act 1988.

Central Government/Public Sector

CTN :43916837

17 Feb, 2026 1.61 Lacs

Sundergarh - Odisha

Tender For fabrication and repair of operator cabin structure cabin door bonnet cover lhs front railing front glass fitment rear view mirror stand blind spot mirror stand mirror brackets walkways platform ladders stairways wiper plate in cat773e 100t of gocp

State Government

CTN :43958854

18 Feb, 2026 18.2 Thousand

Halisahar - West Bengal

Tender For development work (9mtr. tubular pole). under apas within halisahar municipality area. ward no. 02. part no. 02.

CTN :43780526

12 Feb, 2026 NA

Jamnagar - Gujarat

Tender For bid to ras supply of copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , sluice valve 100mm , sluice valve 200mm , sluice valve 80mm , sluice valve 150mm , copper sulphate , gi reducer socket 40x15mm , gi elbow screwed 40mm , gi union 25mm , alum commercial , gi tubing 100 mm , gi tubing 40mm , gi tubing 80 mm , gi tubing 25mm , gi tubing 50mm , alum crystall , calcium hypochlorite , aldrop bolt aluminium 300 mm , aluminium bow handle 100 mm , aluminium curtain rod 20 mm 12 feet long , aluminium door stopper double type 150mm , aluminium door stopper single type , aluminium hasp and staple 75mm , aluminium hasp and staple 100mm with hinge pin including screws and bolt to hinge plate , aluminium knob , aluminium sliding bolt 250x16mm , aluminium sliding bolt 300x16mm , aluminium tower bolt 100mm , aluminium tower bolt 150mm , aluminium tower bolt 200mm , aluminium tower bolt 250mm , ss towel rail 20mm dia d type 60cm long with bracket , angle cock two way cp , anodised bracket for curtain rod , ms nut bolt various sizes , knob cp complete 25mm for door and drawer , cushion for sofa size 530 x 500 x 100mm thick u foam 32 density covered with good quality tepastry cloth , fevicol in 1kg pack , nails wire 1 inch 17 number , nails wire half inch 20 gauge , peg set brass for hat stand , screw wood steel size 15x8 , screw wood steel size 20x8 , screw wood steel size 36x6 , screw wood steel size 45x8 , screw wood steel size 50x8 , touchwood polish for wood , beading wood 15x20 mm x 6 ft long , laminated brown sheet 8x4 1 mm , handle cp for almirah steel , lock brass 6 lever 50mm for steel almirah , nails wire 100 mm , nails wire 20x8 mm , plywood commercial 7 ftx3ftx12mm , hard rubber shoes for chair verandah , turpentine oil , plywood commercial 8 ftx4 ftx12mm , plywood commercial 8 ft x4 ftx18mm , plywood one side teak face 8 ft x 4 ftx 12 mm , prelaminated particle board one side teak face 8 ftx4 ftx18mm , pvc shoe for wooden chair and table , wheel for chair revolving , hasp and staple aluminium , plywood bwr grade 7 ft x 4 ft x12 mm , screw wood steel size 25x8 , seat frame for chair cb steel consisting of 2nd class hard wood duly caned with platic cane , arm rest teak wood for tubular chair , telescopic channel 14 inch

CTN :43780982

12 Feb, 2026 NA

Senapati - Manipur

Tender For bid to ras supply of bathroom water shower (v2) (q3) , looking mirror table dressing gents 360 x700 x 5mm , glass transparent 5mm x 4 feet x 2 feet rectangular , glass toughened 5mm x 6 feet x 3 feet rectangular , glass black colour 6mm x 3 feet x2 feet rectangular , glass panes 3 mm , 3mm thick glass panes , seat for chair cb steel without arms , back seat for chair tubular with arms , base wheel for chair revolving executive , handle for almirah medium steel 100mm cp , rubber cap for chair cb steel , rubber pvc shoes for chair dining , rubber pvc shoes for chair tublar steel , rubber pvc shoes for table dining writing , handle for chair revolving executive , seat cushion of size 510 mm x 470 mm x 60 mm for chair , seat cushion of size 510 mm x 470 mm x 60 mm , back cushion of size 510 mm x 470 mm x 60 mm , back cushion of size 510 mm x 570 mm x 60 mm , bottom gas lift hydraulic for revolving chairs , broom country coconut nariyal jhadu , blazer cloth green 1. 5 mtr wide , electro plated cloth paper no 80 , electro plated cloth paper no 100 , electro plated cloth paper no 120 , synthetic rexine cloth 1. 5 mtrs wide , bricks sub class b designation 75 size 230 x 115 x 75mm , 2nd class h w clean swan scantling in section exc 40 sqcm , perforated particle boards size 60cmx60cmx18 19mm thick , coal tar black paint , 600x450mm bevelled edge mirror mounted on 6mm thick , synthetic rubber adhesive in 1ltr container , suspenders for e-board ceiling , clips holder for e-board ceiling , e-board false ceiling size 60cmx60cmx4mm , sand coarse locally available , fine aggregate sand for concrete , 20mm hard wood planks 25mm and 2. 40 to 3. 00mtr long , spindle no 3 , spindle no 2 , wooden battens n. exc 3 sqm , pvc lipping , f cistern washer , f cistern handle , bib cock washer all types , veneer board 8 feet x4 feet x1mm , 20mm nominal graded crushed stone aggregate , lead pig , lead wool , retrofit led lamp 3 watt code no lhfxbonitn5q008 , ms clamp for street light fittings , lime unslaked fat lime , bracket for whb , self tapping screw , scrapper , thread roll , sand paper , rubber cill door bottom , writing brush flat size no 3 , grating doom 100mm dia of ptmt minimum weight 25 gms , extention nipples cp 15mm x 50mm , writing brush flat size no 4 , plastic rawal plug 40 mm long , hex nipple cp 15mm x 50mm , writing brush flat size no 2 , ms window peg stays long , painting brush 2. 5 cm flat size , writing brush flat size no 1 , reducer socket 40 x 15mm , painting brush 7. 5 cm flat size , aluminium extruded barrel tower bolt 150mm , pvc bracket plain for 20mm dia rod , lime colour blue in 100 mt packet , painting brush 10 cm flat size , glue for lime , aluminium extruded handle 100mm size , pvc bracket angle for 20mm dia rod , wire nails of any size , grating round 140mm size of ptmt minimum weight 50 gms , wooden screw 15mm to 20mm long 100 nos per pkt , gi medium grade tubing 15 mm , wooden screw 25mm to 40mm long 100 nos per pkt //bid details2 / 66

By Cities

By States

By Agencies

By Ownerships

By Sectors