Telephone Units And Mobile Phones Tenders

CTN :45056471

11 May, 2026 NA

Multi City - Chhattisgarh

Tender For design, construction, testing, commissioning of all the components of interception and diversion based sewage treatment plant (stp) work including 05 years of operation and maintenance of the entire system in nagar panchayat kharora 7th call)

CTN :44371866

01 Jun, 2026 NA

Kolkata - West Bengal

Tender For corrigendum : expression of interest for selection of consultant for electrical works at old ho building of the wbscard bank ltd. - expression of interest (eoi) - 4th call for old head building of the wbscard bank ltd. located at 25 d, shakespeare sarani, kolkata – 700 017 for: - 1. survey of the entire building for exploring and understanding the scope of work for repair, renovation & up-gradation of electrical system of the building. 2. preparation of detailed floor-wise-drawings of the proposed electrical system of the building and submission of the said drawings both in soft and hard mode. 3. detailed electrical load survey of the building considering new electrical system including assessment of required capacity and specification of silent diesel generator set to be installed and submission of report there against it both in soft and hard mode. 4. preparation of estimate (scope of work including approximate cost) for repair, renovation & up-gradation of electrical system of the building and submission of the said estimate both in soft and hard mode.

CTN :45050563

18 May, 2026 NA

Ramban - Jammu And Kashmir

Tender For supply of 6 i cells for battery operated magneto telephone desk type of reputed make. ]

CTN :44903780

06 May, 2026 NA

Multi City - Chhattisgarh

Tender For corrigendum : design, construction, testing, commissioning of all the components of interception and diversion based sewage treatment plant (stp) work including 05 years of (5th) call)operation and maintenance of the entire system in nagar panchayat mana camp under sbm 2.0

corporations/Associations/Others

CTN :45038927

06 May, 2026 NA

Koraput - Odisha

Tender For auction sale of miscellaneous metalic scraps,unserviceable telephone instruments

corporations/Associations/Others

CTN :44446483

07 May, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : rate contract tender for supply, installation and commissioning of display monitor, tv, interactive displays, tablet and mobile phone, scanners, plotters and video wall through elcot angadi e-commerce portal - rate contract tender for supply, installation and commissioning of display monitor, tv & interactive displays, tablet and mobile phone, scanners & plotters and video wall through elcot angadi e-commerce portal

State Government

CTN :44831736

04 May, 2026 4.27 Lacs

Multi City - Karnataka

Tender For corrigendum : supply of tools and tackles to vhep, hosangadi-576282 - mc29 hammer core bit 10mm, mc29 taparia screw driver 939, mc29 screw driver 12, mc29 serew drivers set, mc29 c clamp 105mm-taparia, mc29 spirit level-slm0512, mc29 screw driver bit sets -bs80, mc29circlip plier-external,8, mc29 circlip plier-internal,8, mc29 long nose plier 8, mc29 long nose plier 160mm long, mc29 cutting plier 8, mc29 wire stripper cum cutter, mc29 monkey plier, mc29 dividers 24, mc29 hole punch 6mm - 36mm, mc29 hollow hole punch set, mc29 nylon mallet-50mm, mc29 half kg ball peen hammer, mc29 adjustable spanners, mc29 ring spanner set-1812, mc29 two in one stubby screw driver, mc29 insulated screw driver-9281, mc29 double end open spanner set consists of 8-14, mc29 double end ring spanner set consists of 8-14, mc29 double end ring spanner set, mc29 double end open spanner set, mc29 sledge hammer 1/2 kg, mc29 screw driver 823, mc29 taparial screw driver set, mc29 ball peen hammer, mc29 pipe wrench - 12, mc29 pipe wrench-10, mc29 adjustable spanner -12, mc29 adjustable spanner - 6, mc29 ring spanner sets, mc29 hand crimping tool - tubular, mc29 sds plus key type drill chuck, mc29 hss-drill bit set, mc29 hacksaw blade, mc29 hss cobalt grade m-10 tap set, mc29 hss cobalt grade m-6 tap set, mc29 hss tap set m-8, mc29 inside spring calipers-600mm, mc29 boring tool 1/2, mc29 concrete drill bits- 10mm, mc29 concrete drill bit 4mm, mc29 concrete drill bits- 6mm, mc29 concrete drill bit 8mm, mc29 concrete drill bit set - bosch, mc29 drill bit 5 mm, mc29 petrol heavy duty pole pruner, mc29 cutting wheel 355mm, mc29 hss drill bit size 12 mm, mc29 h.s.s.drill bits size 10mm., mc29 h.s.s.drill bits size 8mm., mc29 h.s.s. drill bits of size 6mm, mc29 h.s.s.drill bits size 4mm., mc29 hss drill bit of dia.8.00mm, mc29 hss drill bit of dia.6.50mm, mc29 hss drill of dia 2.00 mm, mc29 hss parting tool thk3/32, mc29 hss cutting tool s400 1x1x6, mc29 hss sq.cuttg tool 1/2x1/2x6, mc29 box spanner with rechet, mc29 cutting player, mc29 adjustable spanner 12, mc29 box spanner set with ratchet, mc29 pipe wrench 24, mc29 taparia pipe wrinch 18, mc29 triangular files rough 12 len, mc29 triangular file rough-6, mc29 half round file(rough)-12, mc29 half round file-smooth-8inches, mc29 round file smooth 12, mc29 round file rough 12, mc29 square files (rough), mc29 file set, mc29 claw hammer 250gram, mc29 feeler gauge 0.05x1.0x150, mc29 measuring tape 30 mtr, mc29 hss cutting blades t118a, mc29 jig saw wood blade t144d, mc29 hammer core bits 14mm, mc29 hammer core bit 12mm, mc29 hack saw frame 12 flat type, mc29 hacksaw blade -1, mc29 hacksaw blade 1/2, mc29 allen keys 15 mm, mc29 allen keys 14 mm, mc29 allen keys 13 mm, mc29 allen keys 11 mm, mc29 allen keys 8 mm, mc29allen key 5mm, mc29 circlip plier (int.&ext.), mc29 driver set nut, mc29 end sealing crimping tool, mc29 philips screw driver set, mc29 screw driver set -taparia -802, mc29 cable cutter, mc29 wire cutter, mc29 screw driver set-std, mc29 screw driver - taparia - 842, mc29 screw driver 8 heavy duty, mc29screw driver-450mm length, mc29 taparia screw driver no.822, mc29 taparia screw driver 713, mc29 taparia screw driver 833, mc29 screw driver 200mm length, mc29 insulated screw driver 829, mc29 nut driver set, mc29 screw driver 8 taparia., mc29 screw driver 10 heavy duty, mc29 measuring tape steel 5mtrs., mc29 wire stripper, mc29 telephone cable punching tool., mc29 cordless screw driver bosch ma, mc29 angle grinder 100mm size, mc29 gasket punch set, mc29 tin cutter tc-12, mc29 hand drilling machine-13mm, mc29 titan crafts mans knife, mc29 taparia make line tester 814, mc29 nut driver - 10mm, mc29 oxy/acetylene cylinder key, mc29sickle, mc29 carpenter flat chissel 25mm, mc29 allen key set ( 2 24mm), mc29 allen key set 1/16to 3/8, mc29 allen key no 36, mc29 allen key no 32, mc29 allen key no 30, mc29 allen key no 24, mc29 allen key 22mm, mc29 allen key 19mm, mc29allen keys 18 mm, mc29 allen keys 17 mm, mc29

CTN :44962786

06 May, 2026 NA

Dehradune - Uttarakhand

Tender For expression of interest document for pre bid selection of consortium partner for procurement of ict equipment along with supply installation for seoc at usdma building it park dehradun - core network switches , supply installation testing commissioning of core switch as per technical specifications and corrigendum updates/clarifications , supply installation testing commissioning of sfp+ module for 10g , access network switches - (for poe & non- poe devices) , "supply, installation, testing & commissioning of access switch 48 port non- poe, as pertechnical specifications and corrigendum updates/clarifications" , "supply, installation, testing & commissioning of access switch 48 port poe+ as pertechnical specifications and corrigendum updates/clarifications" , wireless networking , "supply, installation, testing & commissioning of virtual wireless controller (software)as per technical specifications and corrigendum updates/clarifications" , "supply, installation, testing & commissioning of wireless indoor access point as pertechnical specifications and corrigendum updates/clarifications" , "supply, installation, testing & commissioning of wireless outdoor access point as pertechnical specifications and corrigendum updates/clarifications" , wireless networking , ip telephony appliance based system (minimum 500 end-user lic support including ip phones, video phones and sip h.323 based video conferencing devices. hardware, software and voice gateways shall be from same oem for better interoperability), and will also include 1 pc based console for operator) , supply, installation, testing & commissioning of helpdesk operator wired headsets , "supply, installation, testing & commissioning of fusion room operator wireless hands- free headsets forsoftphone working" , "supply, installation, testing & commissioning of unified communication (uc) system with softphone support and250 user licenses" , supply, installation, testing & commissioning of basic type-i sip phones features a color display, 3 context-sensitive soft keys, and fixed function/navigation buttons. , supply, installation, testing & commissioning of vip (premium) sip telephone with 7- inch or larger color touch screen with a 2mp or 1080p hd camera, supporting one or more sip accounts and 3-way conferencing. features hard function keys for essential call controls and a secondary gigabit ethernet port for desktop/laptop connectivity , supply, installation, testing & commissioning of pc based console for operator , router , "supply, installation, testing & commissioning of standalone / modular router, as pertechnical specifications and corrigendum updates/clarifications with 5 year support." , firewall , "supply, installation, testing & commissioning of utm firewall as per technical specifications and corrigendum updates/clarifications. shall have 32 gb or higher ram and 800 gb nvme ssd storage and wil provide 5 gbps firewall throughput, 3 gbpsipsec throughput, 5 gbps ips throughput or more and 5 gbps nextgen firewall throughput including firewall" , dns security , "supply, installation, testing & commissioning of dns security solution for minimum 150users" , active power factor filter (apff/ahf) , "supply, installation, testing & commissioning of active power factor filter with ct kit(150 a)" , ems , supply, installation, testing & commissioning of element management systems. , nac , nac (appliance + 100 licenses) in ha , hci servers , supply installation testing commissioning of 4 hci nodes for dc across 1 clusters , supply installation testing commissioning of 4 hci nodes for dr across 1 clusters , microprocessor based transient voltage surge suppression (tvss) system with reset facility high/low voltage protection , "supply, installation, testing & commissioning of microprocessor based transientvoltage surge suppression (tvss) system with reset facility high/low voltage protection" , rodent repellent s

CTN :44772083

30 Apr, 2026 NA

Multi City - Chhattisgarh

Tender For corrigendum : design, construction, testing, commissioning of all the components of interception and diversion based sewage treatment plant (stp) workincluding05 years of operation and maintenance of the entire systeminnagar panchayat palari under sbm 2.0(5th call)

CTN :43994952

07 May, 2026 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids.from original equipment manufacturers (oems) and/or authorised channel partners (cps)supply of goods, tools & equipment foran international standard itot in fitter tradeat iti tarsali, gujarat, india - ss and sc center lathe (all geared), design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics., design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic., design, supply, installation, commissioning, testing and training of advance factory automation training kits, application learning systems, hydraulic power saw machine, cnc turn centre, universal milling machine with minimum specification, vertical milling machine, cnc machining centre, cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders., surface grinding machine, universal tool and cutter grinding machine, interchangeable ratchet socket set, hand reamer adjustable cover, hand reamer taper, reamer parallel, set combination, micrometer (0-25), micrometer (25-50), micrometer (50-75), micrometer inside (0-25), vernier calliper (150mm), vernier height gauges, vernier bevel protractor, drill twist taper shank, drill chuck, wheel dresser, machine vice (4 inch), machine vice (6 inch), sleeve drill morse, bench vice, leg vice, dial test indicator, lathe tools hss tipped set, lathe tools bit hss, counter boring and counter sinking tool, arm strong type bit holder rh, arm strong type bit holder lh, arm strong type bit holder straight, straight edge, surface plate, marking table, universal scribing block, v- block pair, square adjustable, angle plate, spirit level, portable hand drill (electric), ss and sc center lathe (all geared), design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics., design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic., design, supply, installation, commissioning, testing and training of advance factory automation training kits, application learning systems, hydraulic power saw machine, cnc turn centre, universal milling machine with minimum specification, vertical milling machine, cnc machining centre, cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders., surface grinding machine, universal tool and cutter grinding machine, interchangeable ratchet socket set, hand reamer adjustable cover, hand reamer taper, reamer parallel, set combination, micrometer (0-25), micrometer (25-50), micrometer (50-75), micrometer inside (0-25), vernier calliper (150mm), vernier height gauges, vernier bevel protractor, drill twist taper shank, drill chuck, wheel dresser, machine vice (4 inch), machine vice (6 inch), sleeve drill morse, bench vice, leg vice, dial test indicator, lathe tools hss tipped set, lathe tools bit hss, counter boring and counter sinking tool, arm strong type bit holder rh, arm strong type bit holder lh, arm strong type bit holder straight, straight edge, surface plate, marking table, universal scribing block, v- block pair, square adjustable, angle plate, spirit level, portable hand drill (electric)

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

State Government