Tender For supply and installation of managed ethernet patch cards for time synchronization of existing relays with gps panel which was received under psdf phase-2 scheme at 220kv brandix substation 3rd call
Tender For providing materials of water supply items to bilichodu gp davanagere - mains wire //ana gp, panel board items //ana gp, cable 4mm //ana gp, pump 18 stage //ana gp, pump 16 stage //ana gp, pump 14 stage //ana gp, pump 12 stage //ana gp, moter 10hp //ana gp, moter 7.5hp //ana gp, moter 6hp //ana gp, bar casing up //gp, bar casing //gp, steeg box //gp, panel bourd //gp, nrv 2 g a //gp, puc 63 m m threeded elbow //gp, puc cap 25 m m //gp, puc cap 75 m m //gp, puc cap 63 m m //gp, motor 6 h p 10 stage //gp, motar cail //gp, elbow 1/2 g a //gp, caller 1/2 g a //gp, nipple 1/2 g a 2 feet //gp, nipple 1/2 g a 1 feet //gp, elbow 3/4 g a //gp, caller 3/4 g a //gp, nipple 3/4 g a 2 feet //gp, nipple 3/4 g a1 feet //gp, electrical tape//gp, motor 7.5 15 stage //gp, motor 7.5 12 stage//gp, realy //gp, volto meter //gp, hamse meter //gp, starter //gp, praventer //gp, auto stater //gp, pipe 2 g a //gp, caller 2 g a //gp, nipple 2 g a feet //gp, bend 2 g a //gp, cabel 4 sq //gp, xcet blade //gp, selvent //gp, puc tee 25 mm //gp, puc tee 75 mm //gp, puc tee 63 mm //gp, puc elbow 75 mm //gp, puc elbow 63 mm //gp, puc elbow 25 mm //gp, puc caller 75 mm //gp, puc caller 63 mm //gp, puc caller 25 mm //gp, repair coupler 110 mm //gp, repair coupler 90 mm//gp, repair coupler 75 mm //gp, repair coupler 63 mm //gp, puc ballwall 75 mm //gp, puc ballwall 63 mm //gp, puc ballwall 20 mm //gp, puc ballwall 25 mm //gp, puc pipe 110 mm //gp, puc pipe 90 mm //gp, puc pipe 75 mm //gp, puc pipe 63 mm //gp, puc pipe 50 mm //gp, puc pipe 40 mm //gp, puc pipe 32 mm //gp, puc pipe 25 mm //gp, puc pipe 20 mm //gp
Tender For providing and fixing of 09 nos. different capacity switch disconnector fuse units with hrc fuse at different location of sirka colliery under argada area
Tender For supply of pfeiffer vacuum make full range gauge 1 , pfeiffer vacuum make full range gauge 2 , pfeiffer vacuum make pirani gauge 3 , two channel controller unit , cables
Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit