Latest aaac conductor Tenders | Government aaac conductor Tenders

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

Central Government/Public Sector

CTN :45719626

18 Jul, 2026 40.00 Lacs

Jodhpur - Rajasthan

Tender For repair/ replacement of lt cable, lt panel and connected items in domestic area (excluding camp area), su site 1a and 1b at af stn jodhpur - excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sqm on plan and getting out in soft/ loose soil complete all as specified and directed., returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil.complete all as specified and directed., removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in any type of soils.complete all as specified and directed., m&l for sand cushioning for xlpe cable with tibba sand (one layer of 80mm thickness before laying of cable and other layer of 150mm thickness after laying of cable) and punning down to 180mm to provide a required cover complete all as specified and directed by the engineer-in-charge.note:- punned thickness only shall be measured and paid., m&l for protection to cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class b bricks complete all as specified and directed by engr-in-charge., supplying and laying un-reinforced precast concrete cable cover, class lv, type i, flat, size 250mm x 150mm x 40mm confirming to is - 5820 complete all as specified and as directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm, 4 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm, 4 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 95 sqmm, 3.5 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 150 sqmm, 3.5 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable, laid in ground with aluminium conductor, 1100 volts grade, cross-sectional area 240 sqmm, 3.5 core complete all as specified and directed., taking down of lt cable any size from trech/ gi pipe/ walls/ on ground/ street light poles complete all as specified and directed., m&l for boring of holes under road, pavement, hard stansding by using manual method with 100mm hdpe pipe complete all as specified and directed by engineer-in-charge., s&f in repair mccb 400 amp, 4 pole, 415 v, 36 ka, thermal megnatic adjustable type complete all as specified and directed., s&f in repair mccb 250 amp, 4 pole, 415 v, 35 ka, thermal megnatic adjustab

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Central Government/Public Sector

CTN :45382837

04 Jul, 2026 NA

Kamrup - Assam

Tender For corrigendum : repair/maint of external electric supply system, distribution lt panels with connected items and allied services at other than basistha area under ge guwahati. - excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for taking out / laying of under ground cable, pole or stay and getting out in soft soil strata complete all as specified and as directed., returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cms spread any type of soil complete all as specified and as directed., removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed., supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (note : punned thickness shall be measured)., m&l for bricks common burnt clay, building brick, sub class b designation 75 old size bricks laid in trenches flat over sand cushioning for cable protection complete all as specified and as directed., m&l for supply and fixing / laying in replacement, connect, test and commissioning of lt under ground cable xlpe insulated, screened, pvc bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor, 1100 volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of ms saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and as directed.note : manufacturers test certificate shall be submitted alongwith rar/fb to engr-in-charge., (a) 95 sqmm x 3.5 core, (b) 70 sqmm x 3.5 core, (c) 50 sqmm x 3.5 core, (d) 25 sqmm x 3.5 core, supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 630 amps, 50ka breaking capacity with overload and thermal tripping feature with magnetic release, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 400 amps, 36 ka breaking capacity with overload and thermal tripping feature with magnetic release, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 250amps, 36ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 160amps, 36ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 125 amps, 36ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, 4 pole, 100amps, 26ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, 4 pole, 63amps, 16 ka breaking

CTN :45713010

07 Jul, 2026 NA

Delhi - Delhi

Tender For supply of sitc control panel 2 loops , sitc control panel 4 loops , sitc of network module the module shall connect panels , sitc of active repeater panel to be integrated with fire alarm , sitc of addressable ip67 rated multi- heat sensor , sitc of analogue addressable photo thermal smoke detector , sitcof addressable multi sensor with co detection , sitcc of response indicator on surface or recessed , sitc of short circuit isolator module base with all mounting , sitc of analogue addressable dual action , sitc of addressable horn with a maximum output of up to 100 db a , sitc of analogue addressable supervised monitor module , sitc of analogue addressable supervised control module , supplying and laying through walls , complete earthing electrode and excavation etc , earth continuity conductor , false ceiling board and cross tee , butterfly valves (v2) as per is 13095 (q2) * /bid number : gem/2026/b/7624747 + /dated: 27-06-2026 ' ' / bid document 1 / 20

CTN :45713123

07 Jul, 2026 NA

Delhi - Delhi

Tender For supply of sitc control panel 2 loops , sitc control panel 4 loops , sitc of network module the module shall connect panels , sitc of active repeater panel to be integrated with fire alarm , sitc of addressable ip67 rated multi- heat sensor , sitc of analogue addressable photo thermal smoke detector , sitcof addressable multi sensor with co detection , sitcc of response indicator on surface or recessed , sitc of short circuit isolator module base with all mounting , sitc of analogue addressable dual action , sitc of addressable horn with a maximum output of up to 100 db a , sitc of analogue addressable supervised monitor module , sitc of analogue addressable supervised control module , supplying and laying through walls , complete earthing electrode and excavation etc , earth continuity conductor , false ceiling board and cross tee , butterfly valves (v2) as per is 13095 (q2) * /bid number : gem/2026/b/7624664 + /dated: 27-06-2026 ' ' / bid document 1 / 25

State Government

CTN :45694609

10 Jul, 2026 NA

Rampur-Up - Uttar Pradesh

Tender For supply of high dielectric strength and thermal stability sf 6 gas , mccb 3 pole 100a 3ph 415v of standard make , rotary head assembly for smc make isolator , jumper cone for panther conductor , vibration damper for earth wire 7 3.25 mm , single tension fitting for acsr panther , pg clamp panther to panther conductor , ct shorting strip for 36kv ct made of copper , 145kv isolator blade smc make , spring charging motor suitable for 145kv cgl make sf6 cb , 145kv isolator clamp suitable for genandy make for panther conductor , tripping coil for 245kv sf6 circuit breaker

CTN :45690757

02 Jul, 2026 5.78 Lacs

Delhi - Delhi

Tender For a.r. & maintenance of 196 hmps flats at south avenue under sub div-1 of ded-201, new delhi. (sh: replacement of defective electrical accessories i/c supply of material).subwork/packages:replacement of defective electrical accessories i/c supply of material. - supplying, installation, testing & commissioning of flood light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage : input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range - 5 deg. to 50 deg. centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%, thd < 10% as per iec 61000-3-2, p. f.≥0.95, ip-66, ik-10, cri >70, under voltage and over voltage protection, emiemc as per cispr -15, lenses for beam angle 30 deg- 120 deg as per the application and the project requirement deg., suitable tilt able fitting, life time (led, driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000°k/4000°k /5700°k /6500°k (as per ansi bin), sdcm(standard deviation color matching) <5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 <120 lm/watt output. lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90°c). (make: havells/ wipro/ philips/ crompton/ regent) 1.1 50 watt , 1.5 sq mm frls pvc insulated single core copper conductor cable., , 4 sq mm frls pvc insulated single core copper conductor cable., , 6 sq mm frls pvc insulated single core copper conductor cable., , s.p. 5/6 a, one way modular switch, , s.p. 5/6 a, two way modular switch, , s.p. 15/16 a, one way modular switch, , 3 pin 5/6 a modular socket outlet, , 6 pin 15/16 a modular socket outlet, , modular bell push, , stepped type modular fan regulator (2 module), , telephone socket outlet modular type, , t.v. socket outlet modular type, , modular blanking plate, , modular base & cover plate for 1 or 2 module, , modular base & cover plate for 3 module, modular base & cover plate for 4 module, , modular base & cover plate for 6 module, , modular base & cover plate for 8 module, , modular base & cover plate for 12 module, , modular gi box for 2 module, , modular gi box for 3 module, , modular gi box for 4 module, , modular gi box for 6 module, , modular gi box for 8 module, , modular gi box for 12 module, , 3 pole mccb, 125 a, 16ka, , 6 amps. to 32 amps. ratings, sp mcb, "c" curve, 10 ka breaking capacity, , 40 amps., 2 pole isolator, , 63 amps., 2 pole isolator, , 100amp., 4 pole isolator, , supply of led batten light (system lumen efficacy ≥105 <120 lm/watt) of following body materials. powder coated die cast /extruded aluminium body (thickness > 1.20 mm) (make: havells/ wipro/ philips/crompton/regent), , 18-22 watt, , 40 watt, , supply of led down lighter (smd type) (system lumen efficacy ≥ 105 <120 lm/watt) of following body materials. powder coated die cast/extruded aluminium body including trim with aluminium reflector (make: havells/ wipro/ philips/ crompton/regent), , 5-7 watt, , 8-10 watt, , 12-15 watt, , supply of led bulb 9 watt b-22/e- 27 type (3 star & above) (white/yellow colour) (make: havells/ wipro/ philips/ crompton/regent), , less credit for damaged and dismantled material received from the work :-, , 5/15/16 amp. switch/socket/bell push/tv antenna socket/telephone socket/dp switch/fan regulator (assorted), , pvc

corporations/Associations/Others

CTN :45698761

10 Jul, 2026 NA

Gwalior - Madhya Pradesh

Tender For auction sale of miscellaneous iron steel scrap, vcb & other steel scrap,allu scrap ( aaac conductor),winding wire scrap,33 kv ct/pt unit various type/capacity without oil scrap,conductor scrap mix,16 kva ue dist. xmer( copper wound single phase without oil & stud),200 kva ue dist. xmer (alu. wound without oil & stud.),100 kva ue dist. xmer (alu. wound without oil & stud.)

State Government

CTN :45669225

01 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material, design, erection, testing and commissioning for sop to improvement and augmentation of lis bharoli phaseii 1 no tube well of 15 hp at village pant in electrical section bharoli under esd hpsebl noi jawalamukhi - steel tubular poles 10 mtr. long muff for steel tubular pole with concrete filling aaac conductor 7/3.81, 80 sq. mm (includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)) single continuous earth wire (g.i wire 8 swg) x-arm cl 100x50x6 mm, length 2800 mm x 2 nos for incommer line x-arm cl 75x40x6 mm, length 2800 mm x 4 nos for supporting do fuse unit & go switch go switch handle supporting cl 75x40x5 mm, length 460 mm go ab switch unit (11kv, 400a, 25 ka) tripple pole ofd type do fuse unit cross-arm channel iron (100x50x6 mm), length 1270 mm 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no. per pole structure al (50x50x6 mm), length 750 mm x-bracing set -ms angle iron 50x50x6, length (2125 mmx2 no } pole top bracket (100x50x6 mm), length 100 mm ht stay set complete stay wire earthing set ht complete in all respect b001 distribution transformer 11/0.4 kv, 25 kva x-arm: [channel iron (100x50x6 mm), length: 2800 mm x 2 nos] ms angle iron (50x50x6 mm), length: 2800 mm x (1 nos for la's) x-arm: [channel iron (75x40x6 mm), length: 2800 mm x 4 nos] for supporting do fuse unit & go switch x-arm [channel iron (100x50x6 mm), length: 2800 mm x 2 nos for transformer bed x-arm [channel iron (100x50x6 mm), length: 460 mm x 2 nos for supporting main channel of transformer ms angle iron (50x50x6 mm), length: 2800 mm x 2 nos ms angle iron 35x35x5 mm), length: 460 mm x 2 nos ms angle iron 50x50x6 mm), length: 950 mm x 2 nos for bed knee bracing ms angle iron (50x50x6 mm), length: 2800 mm x 2 nos for lt distribution box and go switch assembly ms angle iron (50x50x6 mm), length: 450 mm x 1 nos for lt distribution box and go switch assembly go switch handle supporting: [channel iron (75x40x6 mm), length:460 mm go ab switch unit (11kv, 400a, 25 κα) triple pole o/d type d.o fuse unit boq1 aluminium thimble copper thimble danger plate barbed wire lt cable 3.5 core 70 sq. mm aluminium paint. red oxide energy meter (3-ph, 4-wire) dlms compliant 50/5 a ct type for 25 kva dtr lt switched capacitor 9 kvar for 25 kva dtr erection part of 11 kv ht line erection charges & transportation charges complete in all respect of 11 kv ht line erection part of 25 kva dtr erection charges & transportation charges complete in all respect of 11/0.4 kv, 25 kva dtr jguros

Aaac Conductor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

State Government