Latest aac conductor Tenders | Government aac conductor Tenders

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

Central Government And Public Sector

CTN :45717394

21 Jul, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of hydraulic compressor capacity - 100t with one set die suitable for aac conductor 240 sq. mm (hyd. compressor new improved with remote hand operated double action hyd. pump fitted with 2 m hose and pressure recording gauge ) as per annexure - a. [ warranty period: 30 months after the dateof delivery ] ]

Central Government/Public Sector

CTN :45689739

10 Jul, 2026 NA

Kurnool - Andhra Pradesh

Tender For supply of tee connector for quad aac bull to quad aac bull-branch way-t1 point at drawing page 1 , pg clamp for single aac bull to single aac bull , pg clamp for single aac bull to single aac bull for kurnool , pg clamp for single aac bull to single aac bull for nellore , terminal connector suitable for quad bull aac conductor to 4.5inch ips al. tube-horizontal approach

CTN :45048307

31 Jul, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

corporations/Associations/Others

CTN :45668768

30 Jun, 2026 NA

Sumerpur - Rajasthan

Tender For auction sale of earthwire,gs,7/3.225mm,earthwire,gs,7/3.67mm,scrap mild steel structures,empty oil drum,micro spares:pcb,ahu,ac plant,panel,rtcc,145/36kv,20mva t/f,surge arrestor,120kv,pole assy,36kv,vcb,motor,spring charging,mocb,36kv,drum,wooden,conductor,drum,wooden,earth wire,drum,opgw,empty,pressure relief device,compressor,ac plant,capacitor cell for 36kv,vcb,36kv,1250a,26.3ka/3sec,relay,t/f diff prot,87t,numerical,ct,36kv,800-400-200/1a,3c,insulator,porcelain,120kn,insulator,porcelain,70kn,voltage stablizer,pt,36kv,50va,copper bond,7/3.225 earth wire,vibration damper,earth wire,7/3.225mm

Central Government / Public Sector

CTN :45652980

08 Jul, 2026 NA

Sambalpur - Odisha

Tender For supply of tee connector to suit 50 o/d aluminum tube and spider aac conductor (for 25 kv systems) (ri no. 11141, 11142, 11143) rdso spec: ti/spc/ohe/fittings/0130-10/13-rev-1 or latest, rdso drw: eti psi p 11140 or latest. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45484028

26 Jun, 2026 NA

Hyderabad - Telangana

Tender For corrigendum : supply of spares for 100kn servo electric utms - limit switch for kappa 100ss-cf, p/n z108.057, limit switch for hydraulic adjustment, p/n z108.078, remote control for setting up inching operation, p/n mp02489, usc module kappa, universal measurement amplifier, for connecting resistive and inductive bridge sensors, choice of ac/dc power supply, 4 and 6-conductor technology, 24-bit calculated resolution, module occupies one module bus slot, p/n mp00525, insulation end disc half, ultiform uvs 144, p/n z551.004-014, heating element kanthal apm, id 5 in, length 4in, fur 1250 °c p/n z906.072, furnace insulation vertical plate, p/n z551.004-010, furnace thermocouple type s for 5" furnace incl. compensating cables, p/n z551.034, solid state relais 30a/660v for ht-controller 1200°c p/n 930.ssm1a130bd, moving iron instrument 0...5a/10a, p/n 930.eq48, power supply 24 v, p/n 930.2868635, contactor tesys 7.5 kw, p/n 930.lc1d18bl, extension cable hiperface for tcii, p/n 977.066342, external power supply 48v/10a, p/n z240.054-011

CTN :45604349

09 Jul, 2026 NA

Srinagar - Jammu And Kashmir

Tender For rate contract for supply of electrical spares and minor store/hardware items, as given in the detailed boq, from govt approved, reputed, experienced, competent n financially sound electrical contractors/firms/suppliers/jvs/ executors/oems - part: (a) 132kv transmission lines (material ), al. alloy as per is: 617 of 1975 pg clamps 3 bolt type conforming to is: 5561-1970 (amended upto date) for acsr zebra conductor (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided)., p g clamp for acsr panther conductor as per relevant is/iec amended upto date and of reputed/standard make, p g clamp for acsr moose conductor as per relevant is/iec amended upto date and of reputed/standard make, bi-mettalic ct clamp (universal take off) for panther conductor with ct terminals suitable for 132kv/33kv cts as per relevant is/iec amended upto date and of reputed/standard make, bi-mettalic isolator pad clamp (universal take off) of panther conductor with pad terminals suitable for 132kv /33kv isolators as per relevant is/iec amended upto date and of reputed/standard make, bi-mettalic isolator pad clamp (universal take off) of zebra conductor with pad terminals suitable for 132kv /33kv isolators as per relevant is/iec amended upto date and of reputed/standard make, bi-mettalic breaker pad clamp (universal take off) of zebra conductor with pad terminals suitable for 132kv /33kv breakers of sf 6 type-abb,cgl, siemens, bhel/vcb type- s&s, gec alsthom, bhel, abb, siemens, megawin etc as per relevant is/iec amended upto date and of reputed/standard make, bi-mettalic ct pad clamp (universal take off) for twin acsr zebra conductor with conductor spacing 300mm and ct terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin zebra conductor with pad terminals suitable for 132kv /33kv ct as per relevant is/iec amended upto date and of reputed/standard make, bi-mettalic twin isolator pad clamp (universal take off) conforming to is: 5561-1970 (ammended upto date) for twin acsr zebra conductor with conductor spacing 300mm and isolator pad clamp terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin zebra conductor with pad terminals suitable for 132kv /33kv isolator as per relevant is/iec amended upto date and of reputed/standard make, bimetallic ct pad clamp (universal take off) conforming to is: 5561-1970 (ammended upto date) for twin panther conductor with conductor spacing 300mm and ct terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor as per relevant is/iec amended upto date and of reputed/standard make, bimetallic breaker pad clamp (universal take off) conforming to is: 5561-1970 (ammended upto date) for twin panther conductor with conductor spacing 300mm and terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor as per relevant is/iec amended upto date and of reputed/standard make, bi-mettalic isolator pad clamp (univercial take off) conforming to is: 5561-1970 (ammended upto date) for twin panther conductor with conductor spacing 300mm and isolator terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor with pad terminals suitable for 132kv /33kv isolator of reputed/standard make, bi-mettalic isolator pad clamp (univercial take off) conforming to is: 5561-1970 (ammended upto date) for single panther conductor of reputed/standard make, t-clamps 3 bolt type conforming to is: 5561-1970 (amended upto date) for acsr -panther-acsr panther conductor of reputed/standard make, t-

CTN :45393140

26 Jun, 2026 NA

Saran - Bihar

Tender For corrigendum : i) design, manufacture, supply of one (01) number of 10 tonnes electric overhead travelling crane along with lifting magnet suitable for scrap handling and all accessories conforming attached leading parameters. ii) installation, commissioning of one (01) number of 10 tonnes electric overhead travelling crane. iii)removal of existing dsl conductor system and supply, installation and commissioning of new down shop lead conductor system of 336 meter. iv) spares (as indicated in leading parameters). v) training of staff. [ warranty period: 24 months after the date of delivery ] ]

CTN :45058057

13 Jun, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of mt spares d d - 10610717 lv7 t 815 273 111 089 000 rubber bushing , 10610715 lv7 t 815 315 114 877 490 spring , 10347773 lv7 t 815 130 010 201 004 front pin , 10610706 lv7 t 815 990 700 530 000 interspace optical 881 088 , 10324819 lv7 t 815 442 076 633 214 fuel supply tube , 10333333 lv7 t 815 413 341 150 160 tona sn 013 set of wrenches box , 10324090 lv7 t 815 207 901 503 4 cunductor circuit breaker battery , 10325269 lv7 t 815 993 200 607 0 ring piston , 10322302 lv7 t 815 993 050 480 0 ring compression piston 1st ring , 10322786 lv7 t 815 993 050 514 0 ring compression piston 2nd ring , 10326234 lv7 t 815 207 295 611 4 indicator holder eng oil dipstick pipe , 10330918 lv7 t 815 334 545 047 0 needle bearing inahk 2016 , 10317978 lv7 t 815 294 001 032 4 flat windshield , 10318125 lv7 t 815 296 505 144 4 mudguard washer , 10336810 lv7 t 815 443 400 397 0 beacon adapter ipol din 72591 , 10332617 lv7 t 815 441 028 090 574 pipe line holder 10 , 10342993 lv7 t 815 443 857 019 000 socket z 044 , 10323338 lv7 t 815 442 076 824 504 line , 10314584 lv7 t 815 2540 008952 medium mud guard lh , 10321844 lv7 t 815 442 072 964 024 brake cyl bracket , 10315086 lv7 t 815 2990 016127 exhaust piping , 10324892 lv7 t 815 442 076 633 234 fuel supply tube , 10610156 lv7 t 815 130 953 120 274 connecting hose d65 550 mm , 10522751 lv7 t 815 hmv 443 654 064 000 low pressure hose js 13x400 10102 , 10324865 lv7 t 815 443 960 523 018 fan , 10355554 lv7 t 815 443 936 217 360 insulation , 10586849 lv7 t 815 hmv 107 733 000 100 circlip 10x1n is 3075 part 1 86 , 10322837 lv7 t 815 442 079 020 074 protector splice electrical cabel 442 07 , 10343307 lv7 t 815 443 919 632 501 separator , 10328183 lv7 t 815 443 936 700 390 pole adapter , 10329912 lv7 t 815 4x4 442 076 868 964 line , 10320352 lv7 t 815 4x4 442 079 013 764 conductor , 10321145 lv7 t 815 5440 72 0076782 stepladder 442 987 960 154 , 10316259 lv7 t 815 283 311 050 0 spring tube 17x2 pe , 10328451 lv7 av 15 578 003 005 452 68 washer , 10335500 lv7 av 15 578 003 038 752 62 packing , 10335600 lv7 av 15 311 733 100 800 securing ring 80 , 10346869 lv7 av 15 578 003 107 652 28 fuse , 10334990 lv7 av 15 153995 cross head pin complete , 10344545 lv7 av 15 578 003 104 852 28 pin , 10328455 lv7 av 15 578 003 005 552 62 vent screw , 10347986 lv7 av 15 578 003 028 552 80 fuse , 10346853 lv7 av 15 578 003 108 752 34 packing , 10517896 lv7 av 15 dp av 012 drift punch 90 for driving out , 10335380 lv7 t 815 4x4 990 100 950 000 pack rectifire 0139291 , 10326084 lv7 av 15 146 944 lamp 24v 20w ba 15s , 10343666 lv7 t 815 5120 423413 spanner de a series c20x22 is 2028 91 , 10360033 lv7 t 815 130 275 850 074 rear tow hook assy , 10325036 lv7 t 815 442 953 180 054 hose 5x8 1030mm , 10330958 lv7 t 815 311 120 243 100 nut m10x1 csn 02 1402 24 , 10346954 lv7 av 15 578 003 106 252 43 packing //bid details 2 / 45

Aac Conductor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector