Latest ac power supply Tenders | Government ac power supply Tenders

CTN :45694953

27 Jul, 2026 NA

Multi City - Multi State

Tender For bench top pressure gauge calibrator with accessories- pressure calibration system, maximum no. of pressure module simultaneously, working medium, mode, sensor module range 1, accuracy of sensor module range 1, sensor module range 2, accuracy of sensor module range 2, precision, uncertainty of sensor module range 1, uncertainty of sensor module range 2, measurement modules, control mode, control precision, lowest controllable pressure limit, pressure indication & display system, over pressure protection, leak test & switch test, jog wheel, system mode, valve driver, vacuum pump, contamination prevention system, pressure display units, dc voltage range, dcv resolution, dcv uncertainty, dc current range, dci resolution, dci uncertainty, loop compliance voltage, hart mode, automatic hart detection, hart selectable resistor, write protection, hart commands, remote communication interface hardware, ac power supply, operating temperature range, relative humidity, ingress protection, plumbing lines, fittings and adaptors, warranty, calibration certificatte, test port max. pressure limit, reference port max. pressure limit, vent port max. pressure limit, test port, supply port max pressure limit, liquid or particle filter

CTN :45701502

06 Jul, 2026 NA

Patiala - Punjab

Tender For supply of painting & hardware material, wood and glass panes for repair of quarter no. e-03 at pup - neel, s/e light grey paint ist quality, oil bound distemper t.t. oil , fevicol ddl , painting brush , wood primer , kail wood , ,red marindi wood , wire netting , commercial plywood, plain glass, plain glass panes , akaninium tower bolt , aluminium handle, m.s. screw , m.s. nails , fevicol , ,aluminium sheet , terminator, conduit pipe , iron door spring , aluminium double door stopper, myrrh, p.o.p. , lime.

corporations/Associations/Others

CTN :45612213

25 Jun, 2026 NA

Godda - Jharkhand

Tender For purchase of following materials related to chapakal/solar water tower/urban water supply pipe line repair and street light repair installed-di split collar isi mark ,di jointer isi mark nut (7suta) , bolt(suta) , coupling bolt (4 sutta) , esr nut bolt (5 suta ,4inch long) , chain kuppi isi mark , grinder machine good quality , tool set , water testing lab equipments , alum , bleaching powder , lime , grease oil , hydraulic oil , engine oil , breaker (16 kg) , generator (10kva) , pipe wrench (24 n0) , pipe wrench (18 n0) , pipe wrench (14no) , 18/19 ring wrench , 16/17 ring wrench , 16/17 dial wrench , pipe lifter(1.25inch) , rod die , blade (aary patti) , 30/32 ring wrench , 30/32 dal wrench , 36 n0 ring wrench , 36no. dal wrench , plash , 20 no ring wrench , aary frame , electrode rod , pecking all dia(100mm to 600mm) , hrc fuse-100a , kit kat fuse-100a , 250 watt ballast, copper winded, make-cropmpton, phillips etc. , 400 watt ballast, copper winded, make-cropmpton, phillips etc. , 250 watt mh lamp, make-cropmpton, phillips etc. , 400 watt mh lamp, make-cropmpton, phillips etc. , ignitor, make-crompton, bajaj etc. , 33mfd capcitor , 42 mfd capcitor , gi d-clamp (size: l-13', b-2') set with 3 nut bolt (m6x16) for street light, 2mm thickness, d-clamp to fix in pole and round clamp to fix light with pipe. , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-1 inch, pipe thichness-1.5mm , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-1.5 inch, pipe thichness-1.5mm , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-2 inch, pipe thichness-1.5mm , meggar, make-fluke,waco etc. , multimeter, make-fluke etc. , tester, make-fluke etc. , 3p, 16-32a, power contactor, make-l&t, abb, siemens, , extension board with 5mtr cable , combination plier, make- taparia etc. , nose plier, make- taparia etc. , wire stipper, make- taparia etc. , screw driver set, make- taparia etc. , hammer(bal pin), 500 g, make-taparia etc. , drill machine ,800-1200 watt, make-bosch,dewalt etc. , analog timer for high mast , gi wire for binding purpose(18 gauge ) , ldr(light dependent resistor) sensor for high mast , soldering iron, power-65 watt with complete set , d-spanner set upton-32mm , ring-spanner set upton-32mm , allen key set , pvc tape , bamboo ladder , industrial socket , industrial plug top , old tyep vintage bakelite switch for street light , insulation piercing connector upton-50mmsq. , surface mounted led pcb plate for 35 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 45 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 50 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 70 watt street light,make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 110 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 120 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 190 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 200 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 35 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 45 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 50 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 70 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 110 watt street light,make-crompton, havells, orient, bajaj etc. , driver for 120 watt street light,make-crompton, havells, orient, bajaj etc. , 3-phase motor starter upto-20 kilowatt motor , 1-phase motor starter upto-5hp motor , electric air blower with dust extraction, 800-1000 watt, make-bosch, buildskill etc. , electrical adjustable pole climbing shoe

Central Government/Public Sector

CTN :45616722

20 Jul, 2026 NA

Hubli - Karnataka

Tender For supply and testing of digital vhf 25 watt radio with plain mic standard accessories, power supply unit cum battery charger (13.5v/15a) 12v/100ah vrla battery with i-lead connectors lmr 400 co-axial cable with end connectors(30 meter) high gain base antenna with clamps 1.25 pipe pole mast with clamping and stay wire arrangements base station units and built in aes 256 bit encrption (open standred for interoperability) as per rdso spec no. rdso/spn/tc/107/2018 rev. 0.0 amd 1 or latest simlar to motrolaxir m8668i aes 256 eicryption. note - 1. type of battery should be as per requirements of para 3.0 of rdso specification. note-2. the oems overall warranty period should be for 5 years from the date of supply forthe radio set and minimum 1 year for the battery, battery charger and antenna. note-3. the bidders shall submit a model and make of the 25 wats vhf set along with successful poc trail certificate issued by rdsoand the same poc certificate, mtcte certified and wpc certification shall be uploaded along with the bid. inspection by rites. make/brand- rdso poc approved make/mode, accepted make/brand: motorola, kenwood or better. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45576582

01 Jul, 2026 NA

Mumbai - Maharashtra

Tender For chop saw metal cutting machine of size 14 inch, 230 v 50 hz ac power supply. similar to bosch model no gco200 or hitachi model no.cc14std. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45589787

23 Jun, 2026 1.91 Lacs

Delhi - Delhi

Tender For repair/replacement of unsv lt faulty cable near reception bldg., boys mess, auditorium street light at dgncc area and behind clock tower at cpg area and unsv led street lights under the aor of age sldc e/s under ge (u) e supply delhi cantt - 10

CTN :45588976

29 Jun, 2026 50.0 Thousand

Tinsukia - Assam

Tender For supply of kyocera photocopier machine power supply card , canon photocopier machine ac power supply card , smps hp pro tower for desktop , lithium carbon coin cell battery 2.5mah cmos , paper pickup roller canon

CTN :45528061

22 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For supply of light source with accessories, power supply and calibration

CTN :45562952

01 Jul, 2026 43.22 Lacs

West Tripura - Tripura

Tender For supplying, installation, testing and commissioning of equipments for electrical measurement, electrical workshop, electrical machine & power system laboratory at ttaadc polytechnic institute, khumulwng, west tripura for the project "improvement of infrastructure in ttaadc polytechnic institute, khumulwng, west tripura, district under higher education department” under the nec scheme. (2nd call) - supplying, installation, testing and commissioning of electrical measurement, electrical workshop, electrical machine & power system laboratory equipments/machineries of electrical engineering department at ttaadc polytechnic institute, khumulwng, west tripura under the nec scheme "improvement of infrastructure in ttaadc polytechnic institute, khumulwng, west tripura, district under higher education department." (2nd call), kelvin double bridge trainer kitthe instrument should have following features : easy illustration of kelvins bridge digital display (dpm) for null detection online product tutorialthe instrument should have following technical specifications :dc power supply : +5vknown resistance : r1=100k , 20k , 10k r3=1k , 200 , 100 dpm : 2vdimensions (mm) : 240 w x 345 d x 110 hunknown resistance : 0.3 , 0.4 , 0.8 mains supply : 230 v 10%, 50 hz, whetstone bridge trainer kitthe instrument should have following features :sample : constantan, nichromeprovided with dc power supply compact designeasy to operatethe instrument should have following technical specifications:dc power supply:5vgalvanometerdeflection:30 - 0 30resistance:80 unknown resistance type: variablerange:0 - 10k wire samples: -constantan: 1mnichrome:1mfuse:500mamains supply: 90 - 275v, 50hzdimensions (mm):w 345 x d 240 x h 110, experimentation with de sautys and schearing bridgethe instrument should have following features: - a complete set up with all necessary accessories inbuilt 1 khz sine wave generator with variable amplitude null detector with dpmtechnical specification: -sine wave generatorfrequency range:1khz 10%amplitude control output: up to 15vppfuse:500 ma, s/bdpm:200 mvunknown capacitor:0.1 f, 0.22 f, 0.47 fmains supply:230v ac, 10%, 50hzdimension (mm):w 345 x d 240 x h 110, experimentation with maxwells bridgethe instrument should have following features : illustration of both maxwells inductance bridge and maxwells inductance-capacitance bridge on a single board inbuilt 1 khz sine wave generator with variable amplitude null detector with dpmthe instrument should have following technical specifications :mains supply : 230 v 10%, 50 hzdc power supply : +12v, -12vsine wave generatorfixed frequency : 1khz 5%amplitude control range : upto 20vppunknown inductors : 10 mh, 20mh, 30 mh, 56 h, 24 h, 12 hdpm : 200mvunknown internal resistance : 470w, 10 , 20 , 30dimensions (mm) : w 240 x d 345 x h 110, measurement of three phase active & reactive power with single phase wattmeter technical specifications:analog meters: analog voltmeter, range : 300v analog ammeter, range : 2a analog wattmeter power supplies: operated on mains power 415v, 50hz +10%components are mounted on the panels are: capacitive load inbuilt inductive load inbuilt resistive load (external)salient features: three phase power light indicator for mains. front panel built with high class insulated bakelite sheet with sticker well printed circuits and symbols. mcb for short circuit protection connections are brought out through 4mm colored safety sockets. patch cords 4mm. the trainer is housed in metal cabinet. size of the trainer set 36 x 24 , power & power factor measurement by ct & pt in three phase circuittechnical specifications:power supplies: ac power supply 0-415v at 4a operated on mains power 415v, 50hz +10%digital meters: digital voltmeter digital ammeter , digital wattmeter (analog), digital power factor meter components are mounted on the panels are: 3 phase capacitive load (inbuilt) 3phase resistive load (external) 3phase inductive load (external) emergency stop

CTN :45348317

13 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For bid to ras providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - defence; installation of obstruction light over sdr tower; service provider

Ac Power Supply Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector