Latest bolt machine Tenders | Government bolt machine Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Central Government And Public Sector

CTN :45730196

16 Jul, 2026 NA

Bhilai - Chhattisgarh

Tender For supply of lock bolting machine with power pack and tool size- 1/2, 3/4, 5/8" & 7/8" for manufacturing of new wagon with all concomitant accessories as per annexure-a & b. make: stanley, huck, avlock, hitesh udyog or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45733162

01 Jul, 2026 NA

Jamalpur - Bihar

Tender For supply spare parts of power pack assembly of huck bolting machine compatible with power pack unit of orione make huck- bolting machine model no.-ohpl-p540, as per attached annexure, qty.- 01 set. (one set consist of sl. no. 01 to 14, total nos. of items-64 nos.) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45717821

22 Jul, 2026 NA

Katni - Madhya Pradesh

Tender For supply of huck bolt machine as per attached annexure - a [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45669306

15 Jul, 2026 NA

Bharuch - Gujarat

Tender For annual maintenance service (amc) of nitrogen injection fire prevention system (nifps) in 8 nos. transformers of cpf gandhar ongc ankleshwar asset

CTN :45690691

04 Jul, 2026 14.03 Lacs

Jhansi - Uttar Pradesh

Tender For supply of thiopentone inj of 0.5 g without water for injection , paracetamol 650 mg , aceclofenac 100 mg, paracetamol 500 mg , paracetamol 325 mg , diclofenac sodium 50 mg , common cold tab ,cetirizine 5-10 mg paracetamol 500 mg , pseudoephedrine 30-60 mg , diclofenac diethylamine 2.32 percent w,v, quick penetrating topical solution-30 ml bottle,with metered dose spray , fentanyl citrate 50 mcg, ml, 2 ml , pethedine 50 mg, 1 ml , aceclofenac 100 mg , suspension,syp fexofenadine 30 mg,5ml, 60 ml bottle , promethazine syp 5 mg,5 ml bott of 60 ml , dexamethasone sodium phosphate 4.4 mg equivalent to dexamethasone phosphate 4 mg,ml 2 ml , levetiracetam 100 mg,ml, syr,soln,liquid bottle of 100 ml , phenobarbitone 30 mg , gliclazide xr 60 mg plus metformin xr 500 mg , pyrazinamide 1 gm tab , fluconazole 50 mg , amantadine 100 mg , acenocoumarol 4 mg , atenolol 50 mg , atenolol 25 mg , labetalol hcl 5mg,ml, 4ml , gum paint bott of 15 ml , amlodipine 10 mg , halobetasol propionate 0.05 percent ,3 percent salicylic acid ointment , tacrolimus oint 0.03 percent 20 gm tube , para dichlorobenzene 2 percent w,v, benzocaine 2.7 percent w,v, chlorbutol 5 percent, turpentine oil 15 per w,v, bott of 10 ml , frusemide 20 mg, 2 ml , tab eplerenone 25mg , dicyclomine hcl ip 20 mg, paracetamol ip 500 mg , pancreatin microspheres 150mg , pancreatic enzyme capsules with a lipase content of 10000 to 20000 units , doxylamine succinate 10mg usp, pyridoxine hydrochloride 10 mg ip , olanzapine 5 mg , quetiapine 100 mg , fluticasone propionate lotion 0.05 percent bott of 10 ml , fluticasone propionate inhaler for paed use 50mcg,dose, 120 metered doses , fexofenadine hydrochloride 120 mg , leflunomide 20 mg , leflunomide 10 mg , naproxen gel, tube of 20 gm , sulphamethoxazole 200 mg and trimethoprim 40 mg per 5 ml, bottle of 50-60 ml suspension , acyclovir syp 400 mg,5 ml , zidovudine 300 mg , povidone 20 mg,ml, preservative free, phosphate free with comod system , thiamine 100 mg,ml, 2 ml amp , mdi fluticasone propionate , formoterol, 120 , trimetazidine mr 35 mg , depot medroxyprogesterone acetate 150 mg, pfs of 1 ml , misoprostol 200 mg , tenofovir 300 mg,lamivudine 300 mg, dolutegravir 50 mg fdc , tetanus toxoid, purified, absorbed rubber capped, vial of 5 ml 10 doses , serratiopeptidase 5mg , anti d rho immunoglobulin monoclonal human lyophilised freeze dried vial of 100,150 mcg , inj clindamycin 600mg , inj semaglutide 0.25 , inj semaglutide 0.5 , probiotic vaginal tablet , tab caffeine 200mg , tab tadalafil 10 mg , tab tadalafil 20 mg , vaginal pessary containg 400mg progesterone , calcium 5ml ,250mg , fluconazole150mg ,azithromycin 1000mg,secnidazole 1000mg combi , hair removal cream for pre-op patients , hmf human milk fortifier sachet , nac , acebrophylline , nasal spray solspray saline 100ml,100gm,100 metered doge , natural micronised progesterone 25mg inj , niv c-hop 200mg tablet sr containing progesterone 200mg , placentrex oint,each gm contains extract of 0.1gm of fresh human placenta, total nitrogen content not more than 0.25 percent w,w , prochlorperazine maleate stemeti12.5mg inj , sachet racecadotril ,1 sachet, 10mg , soft gelatin natural micronized progesterone 400mg cap , tab nefrosave , moxifloxacin eye drop , syp levocetrizine 2.5 mg,5ml , estradiol valerate 2mg pregnova 2mg , hydrocortisone 10mg , lurasidone 40mg , lurasidone 80mg , mesalamine 500mg , modafinil 50mg , nebivolol 2.5mg , neurobion , nortriptilyne 75mg , omeprazole , levosulpride , pyridoxine 40mg , quetiapine 25mg , risperidone 1 mg , rosuvastatin 10mg , rosuvastatin 20mg , sevelamer 800mg , silodosin 8mg , dutasteride 0.5mg , tamsulosin 0.4mg , dutasteride 0.5mg , voglibose 0.3mg , hydroxy propyl methylcellulose , dextran ,glycerin , polysorbate 80 with polyquad preservative , olopetadine 0.2 percent ,ketorolac 0.4 percent bott of 5ml , prednisolone 0.3 percent , gatifloxacin 1 percent 5ml , sodium valporate 500mg thiopentone inj of 0.5 g without water for injection, p

CTN :45333105

30 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of nut steel bsf 5 8 , nut plain hex m12 , ss bolts 8 4 5 mm , ss bolt size 8 55 mm pitch 1251 mm , ss bolts 8 65mm pitch 1 25mm , bolt size 46 45 mm pitch 2mm , gi bolt and nut 8 35 mm , ss bolt with nut hex head m 10 35mm , bolt 14 45 mm , bolt brass and nut 6 18 mm x length ft head , screw steel 1 x 0ba , nut plain hex head m 8 , screw ba pb hex head 1 x 0ba , screw machine ok slotted hd m 12 40 mm , screw , ss hex screw 8 25 mm , hex hd full tread s s screw size m 12 x 25 pitch 1 75 mm , hex head full thread ss screw size m 8 25 pitch 1 25 mm , bolt bsf precision r steel hex hd zinc plated 7 8 2 1 2 l , bolt hex bsw 5 8 3 , bolt steel ht 5 8 4 , steel bolt and nut m 8 75 , ms bolt and nut m 20 65 , bolt machine hex hd precision pitch phospted steel 4 6 m 20 , bolt machine hex precision brass m 10 35 mm , bolt machine hex head m 14 25 mm , brass bolt m 8 45 mm , brass bolt m 10 35 mm , bolt machine hex ms m 6 40 mm , bolt hex m 16 45 2 mm , bolt machine hex hd ms plated m 20 65 2 5 mm , studs bsf h t steel plain 7 8 2 3 4 long length of metal , stud steel bsf 7 8 4 round h t screwed , stud h t steel 5 8 unc 2 long , stud ht steel 3 4 7 2 , nut hex 7 8 bsf carbon molybdenum copper plated , washer spring single type 4 4 23 2 3 mm , ss bolts 14 60 mm full threaded pitch 2 mm , nut stainless steel 10 mm pitch of thread 2 mm non magnetic , ss washer 8 4 mm id 17 mm od 1 6 mm thk , ss washer 10 5 mm id 21 mm od 2 mm thk , ss bolt 20 60 mm full threaded pitch 2 5 mm , ss washer 13 mm id 24 mm od 2 5 mm thk , ss bolt 16 60 mm full threaded pitch 2 mm , ss bolt 20 70 mm full threaded pitch 2 5 mm

Central Government/Public Sector

CTN :45652674

20 Jul, 2026 NA

Katni - Madhya Pradesh

Tender For corrigendum : supply of huck bolt machine as per attached annexure - a [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45681996

07 Jul, 2026 NA

Multi City - Multi State

Tender For supply of hydraulic hose pipe set 15 meter for hydraulic power rig for lock bolting machine, avlock part no. hs14 or equivalent . [ warranty period: 12 months after the date of delivery ] ]

State Government

CTN :45487538

07 Jul, 2026 11.87 Lacs

Bengaluru - Karnataka

Tender For corrigendum : supply, errection, commissioning of nitrogen injection fire extinguishing system for 20mva power transformer with the required control cable with 220vdc control at somanahalli receiving station.

Bolt Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government