Latest brass cup Tenders | Government brass cup Tenders

CTN :44597033

19 Jun, 2026 NA

Hyderabad - Telangana

Tender For bid to ras supply of ceramic crucibles and agate mortar pestle sets - alumina crucible with lid - 50 ml , alumina crucible - 150 ml , alumina crucible with lid - 150 ml , alumina crucible - 250 ml , alumina crucible with lid - 250 ml , alumina crucible 100 x 100 mm , alumina boat 30 x 25 x 135 mm , zirconia crucible - 50 ml , zirconia crucible - 100 ml , zirconia crucible - 250 ml , agate mortar and pestle set, id - 6 inch

CTN :45407386

17 Jun, 2026 NA

Jalgaon - Maharashtra

Tender For corrigendum : supply of brass cup for ak-47 case

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45475064

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for mechanical department - purchase, open cup apparatus standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation, closed cup apparatus standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety: over-temperature cut-off flame safety control

CTN :45433226

25 Jun, 2026 NA

Thane - Maharashtra

Tender For supply of degreasing agent for all small arms brass cup (5.56 mm, 9 mm, kf-35, 7.62 mm nato, & 12.7 mm) . (meta

CTN :44711955

06 Jun, 2026 NA

Thane - Maharashtra

Tender For bid to ras supply of ` a' twill jute bags of size 600mm length x 350mm width for bagging of 30 kgs of brass cups. the mate

CTN :45099208

03 Jun, 2026 25.00 Lacs

Mainpuri - Uttar Pradesh

Tender For bid to ras corrigendum : supply of green , copper wire multistand 1 mm2 x 180 mt black , copper wire multistand 1.5 mm2 x 180 mt red , copper wire multistand 1.5 mm2 x 180 mt yellow , copper wire multistand 1.5 mm2 x 180 mt blue , copper wire multistand 1.5 mm2 x 180 mt green , copper wire multistand 1.5 mm2 x 180 mt black , copper wire multistand 2.5 mm2 x 180 mt red , copper wire multistand 2.5 mm2 x 180 mt yellow , copper wire multistand 2.5 mm2 x 180 mt blue , copper wire multistand 2.5 mm2 x 180 mt green , copper wire multistand 2.5 mm2 x 180 mt black , copper wire multistand 4 mm2 x 180 mt red , copper wire multistand 4 mm2 x 180 mt yellow , copper wire multistand 4 mm2 x 180 mt blue , copper wire multistand 4 mm2 x 180 mt green , copper wire multistand 4 mm2 x 180 mt black , copper wire multistand 6 mm2 x 180 mt red , copper wire multistand 6 mm2 x 180 mt yellow , copper wire multistand 6 mm2 x 180 mt blue , copper wire multistand 6 mm2 x 180 mt green , copper wire multistand 6 mm2 x 180 mt black , copper wire multistand 10 mm2 x 180 mt red , copper wire multistand 10 mm2 x 180 mt yellow , copper wire multistand 10 mm2 x 180 mt blue , copper wire multistand 10 mm2 x 180 mt black , plug top 2 pin 6 amp , plug top 3 pin 6 amp , plug top 3 pin 16 amp , led light connector , pvc saddle clip , dura cell aa 2500 mah rechargeable cell with charger , steel wire 2.5 mm , ciling fan bl dc type 1300 rpm , philips ceiling 12 watt , philips ceiling light 31 watt , blower 13000 rpm 700 watt , cable cutter , electrical gloves kelvin tools 40082 linman , half round file 15 inch , flat file , three square trinagular file , flat chisel 1 fit 8 inch 16 inhc , grinder 5 inch , mallet rubber hammer , pulley 3 well , rope 32 mm 40 meter , measuring tape 9 meter , hammer 3 kg , hammer 300 gms , janison crimping tool 0.5 mm to 16mm , mini hackwas frame , mini hacksaw blade jk , hacksaw frame , hacksaw blade jk , monkey plier taparia 250 mm , 12 inch screw driver , 18 inch screw driver , wire stepper phy , tester light , drill bit 8 mm , drill bit 10 mm , drill bit 6 mm , 6 meter or 10 meter , swithc 5 amp , socket 5 amp 5 pin , mcb 1 pole 16 amp , mcb 1 pole 32 amp , mcb 1 pole 10 amp , mcb 1 pole 6 amp , flood light 100 watt , flood light 250 watt , flood light 500 watt , road light smps 100 watt , 2 core cable .75 mm x 2 , 2 ciore cabke 1.5 mm x 2 , 2 core cable 2.5 mm x 2 , 4 core cable 2.5 mm x 4 , 4 core cable 1.5 x 4 , 3 core cable 1.5 x 3 gang box pvc 10 way , gang box pvc 12 way , gang box pvc 03 way , gang box pvc 05 way , gang box pvc 08 way , gang box pvc 14 way , combind box 6 amp x 2, combind box 16 amp x 2, 2 pole mcb box pvc, 4 pole mcb box pvc, brass screw 1 inch, brass screw 1.5 inch, brass screw 2 inch, brass screw 2.5 inch, brass screw 3 inch, brass cup varshal, pvc casing capping 16 x 16 mm, pvc casing capping 25 x 16 mm, pvc casing capping 40 x 16 mm, grinder blade 5" (metal), wire circle clip 1.5 mm, wire circle clip 2.5 mm, wire circle clip 4 mm, wire circle clip 6 mm, wire circle clip 10 mm, wire circle clip 8 mm, pvc saddle clip double clip 25 mm, pvc saddle clip double clip 32 mm, casing button clip, 1 mm 2 core multistand wire, cable tie 100 x 2.5, cable tie 150 x 2.5, cable tie 200 x 4.8, cable tie 400 x 4.8, pvc gulli 4 mm, pvc gulli 6 mm, pvc gulli 10 mm, fastner 8 mm, fastner 10 mm, gypsum screw 1.5 inch, gypsum screw 2 inch, gypsum screw 2.5 inch + 1 inch , wooden screw 1.5 inch, wooden screw 2 inch, wooden screw 2.5 inch, fan regulator knob (cap mini), fan regulator know (cab big), 16 mm2 lugs al, 70 mm2 lugs al, 35 mm2 lugs al, condensor 2.5 mfd (gc //bid details 2 / 119

CTN :45351359

04 Jun, 2026 NA

Pudukkottai - Tamil Nadu

Tender For supply of lab equipments - purchase of lab equipments, four stroke petrol engine test rig specifications: single cylinder, 4-stroke spark ignition, petrol engine. air cooled rope brake arrangement with spring balance for loading . speed :1500 3500rpm power 3 hp. panel board for measuring speed with power supply and tacho generator setup, burette with tank assembly. load test test rig kit . heavy-duty fabricated ms base frame anti-vibration mounting arrangement powder-coated / painted finish , saybolt viscometer apparatus specifications: glass type: high-quality borosilicate glass tube. control type: manual energy regulator control. shape: rectangular bath with cylindrical test chamber. temperature range: ambient to 240 c oil bath temperature. humidity: up to 80% rh (non-condensing). power supply: 230 v ac, 50 hz. measuring range: 32 to 1000 sus(saybolt universal seconds). accuracy: as per astm d-88( 0.2 seconds). mounting type:benchtop. capacity:one cup(approximately 60 ml). control mode:manual operation. port size:standard orifice sizeas per astmd-88. features:oil bath with heater, thermoregulator, insulated outer body, orifice, receiver flask., cleveland open cup (coc) apparatus specifications: standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 c per minute (as per standard) temperature range: (-6 to 400) c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation, pensky-martens closed cup apparatus specifications: standard compliance: astm d93 / is 1448 (part 21) type: pensky-martens closed cup (motorized, digital type preferred) test cup: brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system: heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) digital temperature display power supply: 230v ac, 50 hz safety: over-temperature cut-off flame safety control