Latest brass cup Tenders | Government brass cup Tenders

CTN :45676692

09 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of fire safety and fighting laboratory equipment for fts department - purchase of fire safety and fighting laboratory equipment for fts department, cleveland open cup (coc) apparatus standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 c per minute (as per standard) temperature range: (-6 to 400) c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hzsafety: overheat protection heat insulation, pensky-martens closed cup apparatus standard compliance: astm d93 / is 1448 (part 21) type: pensky-martens closed cup (motorized, digital type preferred) test cup: brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system: heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustableignition:pilot flame with automatic shutter mechanismtemperature measurement:thermometer or digital sensor (ip-28c or astm)digital temperature displaypower supply:230v ac, 50 hzsafety: over-temperature cut-off flame safety control

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45690184

16 Jul, 2026 NA

Sheopur - Madhya Pradesh

Tender For supply of basmati rice good quality , wheat flour chakki , wheat flour , refined oil 15 ltr tin soyabin , mustard oil 15 ltr tin , tea , tea premium , arhar dal , urad dal dhuli , urad dal chilka , urad dal whole , chana dal , masoor dal , masoor whole , moong dal chilka , moong dal dhuli , moong whole , dry peas green , black chana , kabuli chana , rajma chitra , rajma lal , besan , chat masala , chana masala , chhole masala , amchur , amchur catch , kala namak , rice normal , dhaniya powder , jeera powder , sabji masala , garam masala , haldi powder , kasuri methi , raita masala , red chilli powder , kitchen king , whole coriander , whole red chilli , salt , hing , jeera whole , black pepper , clove , methi seeds , mustard rai seeds , small cardamom , big cardamom , bay leaf tejpatta , dalchini , jaifal , ajwain , soyabean bari , suji , daliya , pickle mix 5 kg , ghee , dry coconut , dry coconut powder , custard powder , sevaiya roasted , maida , mungfali dana , poha , saunf green , kishmish , almond , kaju , roasted kaju , baking soda , eno , roasted almond , pasta , papad , boondi , biscuit parley g 100 pc , biscuit 20 20 100pc , biscuit goodday , bakery biscuit , chana atta , bajra whole , makki whole , makki atta , makki poha , puffed rice murmura , sugar , tomato sauce , jam , sharbat , paper napkins 50 per pack , foil paper 12 m roll , kalonji , bornvita , washing powder , sabudana , kangni rice millet , makhana , match box pack of 6 , sambhar masala , pav bhaji masala , idali rava , mota daliya , rosted chana , salted peanut , sev namkeen , rusk tost , iron scruber juna , scruber juna normal , paneer masala , pulav biryani masala , gud , gulab jamun powder , bhujia namkeen , moong daal namkeen , punjabi tadka namkeen , panchratn mixture namkeen , posta dana , soya sause , vineger , chili sause red , chili sause green , emli without seed , emli with seed , safed til , butter , kasmiri mirch , poha masala , vim soap , vim liquid , bread , cream roll , sweet bread bun , samosa , savory cracker mathi , imarti , motichoor laddu , gulab jamun , potato , onion , garlic , ginger , tomato , coriander leaves , green chilli , lemon , bhindi , baingan , patta gobhi , palak , mattar , kali tori , lauki , kakadi , kheera , kadu , phool gobhi , gajar , balor phali , gaur phali , karela , muli , shimla mirch , hari methi , chukandar , mango , pomegranate , grape , banana , orange , apple , papaya , watermelon , frozen green mattar , egg 30 piece tray , paneer , mava , milk packed , milk loose , dahi , butter milk chach

State Government

CTN :45676047

02 Jul, 2026 36.58 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to krishna block, national games village, koramangala, bengaluru from august-2026 to july-2027 (reserved for sc)- item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of engineer-in-charge. (the old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ rs. 0.10 per litre) (if during cleaning any gi fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: cleaning of sewer line by rodding equipment for dia above 150 mm.(while cleaning septic tank all safety and precautionary measures to be taken,standard operating procedure to be adopted and pemsr act 2013 to be strictly followed). , item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing brass full

State Government

CTN :45676048

02 Jul, 2026 36.57 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to sharavathi block, national games vilalge, koramangala, bengaluru from august-2026 to july-2027 (reserved for cat-iia)- item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. tower bolt black finish, (bar- rel type) with necessary screws etc. complete : , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing unplasticised pvc connection pipe with brass unions : 30 cm length - 15 mm nominal bore , item description: providing and fixing c.p. brass shower rose with 15 or 20 mm inlet : 100 mm diameter , item description: providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 , item description: providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 g. , item description: providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 , item description: providing and fixing pillar cock made of stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - premium , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 20 mm nominal dia pipes , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 25 mm nominal dia pipes , item description: providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests , ite

CTN :45632721

30 Jun, 2026 NA

Pune - Maharashtra

Tender For brass cup for cartg sa 7.62 mm blank and 0.30" -06 4510 kgs. sporting ammunition cases as per drg. no

CTN :45612270

01 Jul, 2026 NA

Nilgiris - Tamil Nadu

Tender For disposal of old/obsolete/unserviceable items.- refrigerator , deep freezer, , aluminium dekchi, , aluminium tray, , steam boiler, , steel deck, , aluminium cooker - big, , aluminium cooker - small, , steel colander, , steel drum, , aluminium bucket, , aluminium round tray, , iron kadai, , copper drum, , aluminium cover / lids, , steel tea filter, , steel hot case, , steel jharni, , aluminium cake mould, , steel egg beater bowl, , steel egg beater whisk, , steel egg beater machine whisk, , steel tea strainer, , aluminium sauce pan, , aluminium container, , aluminium cooker cover, , steel jug, , steel glass, , steel stool, , steel exhaust hood, , steel dosa burner, , steel egg beater machine, , steel wet grinder, , steel potato peeler, , steel bread slicer, , steel dosa burner - small, , steel food waste grinding machine with motor, , steel mincing machine - big, , steel mincing machine -small, , steel gas burner, , iron drum, , steel weighing scale small, , steel cover, , steel chappathi machine, , steel tandoori grill, , stainless steel, , aluminium, , iron, , copper

CTN :45502202

06 Jul, 2026 NA

Mandi - Himachal Pradesh

Tender For rate contract for the purchase ofconsumble items and proprietary items in the department of pathology - list 01: consumble items, lavender top vaccutainer, methanol, giemsa stain, dpx mountant, xylene, wbc diluting fluid, glass slides, methylene blue stain, spirit, sodium hypochlorite, leishman stain, propane-2-ol, haematoxylin stain, e.a. 50, orange g, coverslips, immersion oil, sulphuric acid, carbol fuchsin, paraffin wax, edta, embedding tissue cassette, embedding moulds, silver nitrate, sodium chloride alkaline, leishman s stain, light green, haematoxylin stain in gm form, hydrochloric acid 35%, hydrochloric acid n/10, glycerin, fuchsin basic, congo red indicator, benedict reagent, ammonium solution 25%, alcian blue 8gx, acetic acid glacial, aluminium sulphate hydrate, staining troughs glass, disposable biopsy needle (adult and child), paraffin brush medium size, new methylene blue, diluent for dna extraction, sodium acetate, orange g powder, ponceau-2r, nuclear fast red, clove oil, dropping bottles glass, flat bottom round flask, flat bottom round flask, whatman filter paper, sodium hydrosulphite (dithionite), camphor, cerium trioxide, sodium bisulphite ar, methylamine sol. 40%, borax deahydrate ar/acs, jars (glass) rectangular with cover, jars (glass) rectangular with cover, jars (glass) rectangular with cover, jars (glass) rectangular with cover, jars (glass) rectangular with cover, jars (glass) rectangular with cover, beakers, beakers, beakers, beakers, beakers, funnels, funnels, funnels, test tube stand, test tube stand, test tube holder (adjustable for 5 to 25mm), test tube, enamel tray, enamel tray, enamel tray, wash bottle, petri dishes (culture plates), pasteur pipette with rubber teat, dropper with plastic teat, test tubes without rim plain, test tubes without rim plain round bottom, test tubes without rim plain round bottom, test tube brush, glass cover slips, filter paper, gloves (latex), face masks, micropipette of variable volumes, micropipette of variable volumes, micropipette of variable volumes, micropipette of variable volumes, tips for micropipette (yellow, blue, white), tips for micropipette (blue), tips for micropipette (white), tips for micropipette (yellow), tips for micropipette (yellow), anhydrous aluminium chloride, aniline, l-ascorbic acid ar, aluminium hydroxide, ammonium ferric sulphate ar, ammonium oxalate monohydrate ar, ammonium sulphate ar, alpha amylase diastase, ammonium chloride ar, alpha napthyl acetate ar, brilliant cresyl blue, bromo-cresol green solution, charcoal activated ar phosphorous free, congo red indicator 1.00, chloroform ar, polyethylene glycol 300 1.00, cobalt chloride, cobalt nitrate hexahydrate, chromic acid hexahydrate ar (chromium trioxide), crystal violet, copper sulphate anhydrous ar, citric acid, di-sodium hydrogen ortho phosphate anhydrous ar, dextrose, diastase amylase activity, diphenyl amine ar, edta, edta dipotassium salt, edta disodium salt, egg albumin flakes, eosine yellow indicator water soluble, ethyl ether 1.00, fast green 1.00, ferric chloride anhydrous 98%, ferric chloride acid, ferrous acid 1.00, ferric ammonium sulphate, fast blue b, gelatin bacteriology, gold chloride acid, grams safranine 0.5%, haematoxylin stain, hydrogen peroxide solution 30%, iodine ar , iodine carrier ar 1.00, iron chloride ferric chloride anhydrous, lithium carbonate, mercuric oxide red ar, mercuric chloride, magnesium sulphate 7m, magnesium ar, methyl red indicator, methyl green, neutral fast red, osmic acid, oxalic acid, potassium dichromate ar, potassium ferrocyanide ar, potassium hydroxide pallets ar 1.00 500gm, potassium metabisulphite, potassium permanganate ar, potassium iodine ar 1.00 500gm, potassium carbonate ar, phosphotungstic acid ar, potassium chloride , picric acid, paraldehyde, 1,2 propylene glycol, parasosaniline, potassium nitrate ar, periodic acid ar, sudan black, sodium carbonate, sodium borate, sodium iodate, sodium metabisulphate, sodium nitrate, sodium di

CTN :45407386

17 Jun, 2026 NA

Jalgaon - Maharashtra

Tender For corrigendum : supply of brass cup for ak-47 case

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

Brass Cup Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government