Latest brass cup Tenders | Government brass cup Tenders

CTN :45722125

20 Jul, 2026 2.00 Lacs

Delhi - Delhi

Tender For supply of allout refil , glass cleaner 500 ml colin , room freshener , borosil glass , allout machine , hit 400 ml , soft broom , wall clock , dustbin small , duster white , duster floor big pocha , liquid soap 5 ltr , bucket 20 ltr , wiper steel handle , soap small , phenyle 5 ltr , broom hard , candle , scotch brite , tea coaster , urinal cube , vim powder 500 gm , web brush

CTN :45676692

09 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of fire safety and fighting laboratory equipment for fts department - purchase of fire safety and fighting laboratory equipment for fts department, cleveland open cup (coc) apparatus standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 c per minute (as per standard) temperature range: (-6 to 400) c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hzsafety: overheat protection heat insulation, pensky-martens closed cup apparatus standard compliance: astm d93 / is 1448 (part 21) type: pensky-martens closed cup (motorized, digital type preferred) test cup: brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system: heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustableignition:pilot flame with automatic shutter mechanismtemperature measurement:thermometer or digital sensor (ip-28c or astm)digital temperature displaypower supply:230v ac, 50 hzsafety: over-temperature cut-off flame safety control

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government/Public Sector

CTN :45681840

29 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of 1- cup saucer bone chaina gold line white (make bharat oasis) 06 pcs- 01 set. 2- tea kettle electric 1 itr- stainless steel body (make& bajaj prestige) 01 no 3- tumbler glass brosil medium size capacity 250ml- 02 sets (12 pcs) 4-thermos jug stainless steel body capacity 1 ltr 01 no- (make milton or cello co-) 5-tray medium size melamina superior quality - 01 no- 6-dinner set glass ware white plane contains 06 pcs full plate- 06 pcs full plate, 06 pcs veg bowl (make& 7-borosil, hi&luxe), 01 pcs open dish makebosil co-01 no.7-superior quality steal spoons- 12 pcs, 8- superior quality tea coaster & 12 pcs- (item qty01) [ warranty period: 24 months after the date of delivery ] ]

State Government

CTN :45676047

02 Jul, 2026 36.58 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to krishna block, national games village, koramangala, bengaluru from august-2026 to july-2027 (reserved for sc)- item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of engineer-in-charge. (the old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ rs. 0.10 per litre) (if during cleaning any gi fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: cleaning of sewer line by rodding equipment for dia above 150 mm.(while cleaning septic tank all safety and precautionary measures to be taken,standard operating procedure to be adopted and pemsr act 2013 to be strictly followed). , item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing brass full

State Government

CTN :45676048

02 Jul, 2026 36.57 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to sharavathi block, national games vilalge, koramangala, bengaluru from august-2026 to july-2027 (reserved for cat-iia)- item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. tower bolt black finish, (bar- rel type) with necessary screws etc. complete : , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing unplasticised pvc connection pipe with brass unions : 30 cm length - 15 mm nominal bore , item description: providing and fixing c.p. brass shower rose with 15 or 20 mm inlet : 100 mm diameter , item description: providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 , item description: providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 g. , item description: providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 , item description: providing and fixing pillar cock made of stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - premium , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 20 mm nominal dia pipes , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 25 mm nominal dia pipes , item description: providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests , ite

Central Government/Public Sector

CTN :45557503

29 Jun, 2026 3.86 Lacs

Surat - Gujarat

Tender For corrigendum : supply of fevi stick 15 gram , red permanent marker , black permanent marker , blue permanent marker , blue ball pen , red ball pen , black ball pen , pen stand , door mat plastic 1.5 x 2 feet , examination pad , cello tape 2 inch , padle dustbin , sponge damper pad , big stapler , small stapler , 200 page hardbound register , check cloth duster dusting , small sticky note 1x3 , pilot pen blue , pilot pen black , pilot pen red , a4 size paper ream , file tray , tea cup 6pcs , calculator , air freshener 75gm , odonil pauch air freshner , wall clock , aa cell battery , aaa cell battery , water jug , whiteboard 3x2 , whiteboard 4x3 , box file , whitner , electric kettle 1.5ltr , white big size towel , stapler pin big , stapler pin small , cello tape 3 , lamination small pauch 65x95mm , binder clip 19mm , binder clip 32mm , binder clip 51 mm , whiteboard marker black , whiteboard marker blue , whiteboard duster , plastic file folder regular a4 size , plastic sheet protector regular a4 size , mosquito repellent refill , big door lock , spring file , cobra file , pencil , eraser , sharpner , steel ruler scale , permanent marker black 0.5 point , permanent marker blue 0.5 point , permanent marker red 0.5 point , white envelope 9.5 x4.5 inch , fevikwik , brown tape 2 inch , lamination paper a4 100 pack , double side tape , note pad , u pin , 100 page register , thread , water bottle , paper cutter , hit anti roach , mouse pad , envelope window , i card lanyards , pin holder box , water glass , paper pin , tea coaster , scissor

CTN :45647889

02 Jul, 2026 NA

Barmer - Rajasthan

Tender For supply of bathroom cleaner 1 ltr , phynyl 1 ltr , nepthalene balls white 100 gms , room freshner , mosquito machine with liquid , mosquito liquid , duster cloth good quality , colin 500 ml , toilet cleaner , toilet brush good quality , floor cleaner , plastic wiper good quality , mosquito insects killer spray , cockroach killer spray , handwash liquid , disposable uranal mat , plastic dustbin , bucket , dish wash gel , dish wash scruber , tiliwali jhaddu , aa size pencil cell durocell , aaa size pencil cell , mug , pocha cloth , garden water pipe , bathroom freshner , wasing powder 1 kg , godrej lock 7 lever , casseroll as per sample , vip ceramic full plates , coconut stick long handle wet and dry broom , broom soft phool jharu with plastic handle , mob stick with long handle , tray wooden medium as per sample , tray wooden large as per sample , white plastic tray medium large , coaster wooden for officers , extension cord 5 mtr , tea flask 1 ltr , water camper 10 ltr , vip ceramic qtr plate set for tea as per sample , white tea cup set of 06 as per sample , stamp pad large , stamp pad medium , board marker pen , envelope 11 x 05 inner laminated with cloth , envelope 16 x 12 inner laminated with cloth , tapes 3 transperant , sutli , fevi stick medium , fevi stick large , fevicol 500 gm , dust pan , t pin * /bid number : gem/2026/b/7659269 + /dated: 22-06-2026 ' ' / bid document 1 / 38

CTN :45632721

30 Jun, 2026 NA

Pune - Maharashtra

Tender For brass cup for cartg sa 7.62 mm blank and 0.30" -06 4510 kgs. sporting ammunition cases as per drg. no

CTN :45601364

29 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For supply of brief case , mosquito racket , water glass , coaster , tea strainer , coffee mug med size , qtr plate , full plate , mixer grinder , plastic bucket twenty ltrs , plastic mug , plastic dustbin ten ltr , serving tray , net cover , air conditioner one ton , foot mat small , foot mat large , water pipe , spray machine

Brass Cup Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector